How To Fix That Nasty Spine Roll On Your Comic!
Ойын-сауық
Don't forget to comment and subscribe! Please consider becoming a Patron and supporting the channel via Patreon: / jernoscomics
Purchase Official Jerno's Comics Merch @ teespring.com/stores/jernosco...
Follow me on Instagram @ / jernos_comics
Follow me on Twitter @ / jernos_comics
Facebook @jernoscomics
Affiliate Channels:
Comic Book Cannon (Live Shows Every Friday @ 6PT/9ET)
/ @comicbookcannon
A-1 COMICS
a-1comics.com/
A-1 COMICS Live Sales every Wed/Fri @6PM PT/9PM ET @ / a1comics
Want a professional grading service with transparency of the grading process? Visit: egscomicsgrading.com/
STATE OF COMICS
stateofcomics.com/
SUPPORT SMALL INDEPENDENT PUBLISHERS:
www.grandwaycomics.com/
Don Comic Book Junkie
kzread.info?searc...
The Boy Who Had 7
/ @theboywhohad7talkscom...
Alex the Comic Hoarder
/ alexthecomichoarder
Metarog
/ metarog
Comic Crypt of Castle Hills
/ channel
Pressable Defects
/ @pressabledefects
Keep It Thoro Comics
/ thoroqboro
Spine Ticks
/ spineticks
#comiccollecting #howto #comics
Пікірлер: 227
Don't forget to comment and subscribe! Please consider becoming a Patron and supporting the channel via Patreon: www.patreon.com/Jernoscomics Purchase Official Jerno's Comics Merch @ teespring.com/stores/jernoscomics
@sergioxander9809
2 жыл бұрын
You all prolly dont give a shit but does someone know a way to log back into an Instagram account?? I was dumb forgot my login password. I would appreciate any assistance you can offer me
@ezequielrussell5901
2 жыл бұрын
@Sergio Xander Instablaster ;)
@sergioxander9809
2 жыл бұрын
@Ezequiel Russell I really appreciate your reply. I found the site thru google and im trying it out atm. Looks like it's gonna take a while so I will get back to you later with my results.
@sergioxander9809
2 жыл бұрын
@Ezequiel Russell it worked and I now got access to my account again. I am so happy! Thank you so much, you saved my account !
@ezequielrussell5901
2 жыл бұрын
@Sergio Xander glad I could help xD
I always clean the book before any kind of humidification, tack ironing and pressing. Otherwise you chance fixing dirt and grime into the book by pressing it first. Also I use silicone release paper or parchment paper directly on the front cover under a non laminated backer board or inkjet paper to avoid the possibility of the board sticking. The basic principles are here. I have found that you actually only need to press the unfolded book flat for 5 minutes and then you can re-fold the book while it is still warm and then press and cool as usual.
@JernosComicsPopCulture
3 жыл бұрын
Thanks for stopping by and sharing your techniques! I always clean my book before a press as well, but I was just excited to make this video! lol. Also, I just invested in some parchment paper to put under the non laminated backer board!
This was super interesting. I would love to press some of my own books, but I am so paranoid about ruining my books.
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching! I was the same way at first! Definitely have to start with some quarter/50 cent bin books to work out the kinks on.
@WoWergon
3 жыл бұрын
The next time your local shop has a stack of old books for like $5 (bulk) buy some up and practice on those.
@comixof2morrow
3 жыл бұрын
Also, watch some videos. Maybe watch like 4 or 5 different vids from diff creators and follow their methods
@mikeshelogowski434
Жыл бұрын
This is making me nervous 😓
Wowwww! That’s artistry right there. The suspense lol. That came out really nice, thanks for sharing it!
@JernosComicsPopCulture
3 жыл бұрын
Haha Thanks man!
Well done & great presentation!
Thanks for the great demonstration. Your videos are very clear and informative.
@JernosComicsPopCulture
2 жыл бұрын
Thanks for the feedback, Jeff!
Awesome, thanks!!
Very nice. Thanks for teaching us. Appreciate it.
@JernosComicsPopCulture
3 жыл бұрын
For sure! Thanks for watching!
I enjoyed watching the process. Very informative. I've now seen quite a number of pressing vids. I'm getting there slowly but surely. Thanks for posting.
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching! It's definitely a process!
Great job. It is so satisfying when a book comes out flat and even.
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching!
awesome work mate
I don’t know if I’ll ever trust myself well enough to be handling some of the higher grade/grail books, but this process as a whole looks both fun and rewarding. I’ll undoubtedly be looking more in depth at presses and tool option-techniques here in the near future. Thank you for the demonstration!
@JernosComicsPopCulture
3 жыл бұрын
Of course! And good luck to you on your future trials!
Great video Chris!
@JernosComicsPopCulture
2 жыл бұрын
Thank you!
Very Good Video! Lots of good tips! Thanks for making this demo!
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching!
Just getting back into the comic collecting after 50yrs. thanks for a great video on correcting spine rolls...
@JernosComicsPopCulture
3 жыл бұрын
Welcome back, John! Glad the video was helpful!
Very informative and well done. Thanks for the info! 🎯
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching!
Thank you for mentioning how you handle current books. I thought about asking you about that today
@JernosComicsPopCulture
3 жыл бұрын
Indeed, indeed!
Great job brotha! Came out gorgeous
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
Awsome now know how to do this. I just picked this book up. Thank you for the info
@JernosComicsPopCulture
3 жыл бұрын
Thank you and congrats!
Awesome work!!!!!
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
Very helpful video!
Man I did not expect that. Awesome video Chris
@JernosComicsPopCulture
3 жыл бұрын
Thanks man!
Splendid process for fixing spine roll!
@JernosComicsPopCulture
Жыл бұрын
Thank you!
very helpful, thanks king
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching!
Just learning to press and came across your channel. Great vids, man, your insight is much appreciated. Excited to get the kinks out on some beat-up comics and get this down!
@JernosComicsPopCulture
Жыл бұрын
Thanks for stopping by and subbing! Good luck on the pressing journey!
Thanks for showing us how you press! Thanks bro!
@JernosComicsPopCulture
3 жыл бұрын
Of course! Thanks for watching!
Great job 👏
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
awesome job thanks
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching!
It looks amazing!
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
Amazing you've just changed my life
@JernosComicsPopCulture
11 ай бұрын
lol this is good to hear! Thanks for watching!
TY for the tips.
@JernosComicsPopCulture
3 жыл бұрын
Of course!
this is why you all need to subscribe to this channel. he does so much for the comic community.
@JernosComicsPopCulture
3 жыл бұрын
Wow, thank you Brian. Your words mean a lot to me!
Great videos! I heat the book for just a few seconds before dry cleaning or wet cleaning. I also humidify the book before flattening and again before reshaping. Keep up the good work!
This is great! Thank you for sharing the steps (thanks to the KZread algorithm its like two years ago) but still 😂 I've got a press coming and I'm excited (and nervous) to try my hand at some books. ALSO just found your channel and I'm excited to back track and see the other great content you have!
@JernosComicsPopCulture
Жыл бұрын
Thanks for stopping by!
Came out great!
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
I could not take my eyes off this the before versus after is crazy
@JernosComicsPopCulture
3 жыл бұрын
Nice! Thanks for watching!
excellent vid!
@JernosComicsPopCulture
2 жыл бұрын
Thank you!
Dude you gots machines..lol
Wow I think that book turned out really good you correct the spine roll apocalypse really good👍
@JernosComicsPopCulture
3 жыл бұрын
Haha thanks Isaac! I hope to do more of these vids soon!
Thanks, i learnt something today. I have the same press in purple. A great tip i found for speeding things up is using 12 by 16 parchment, and sandwich your book, board and paper between the single piece. I found adding an aluminum plate on the bottom of my press, stops the mushy pad from crumpling up the back papers.. I do the same heat and shorter times as you do also.
Love me the Conair steamer!!
@JernosComicsPopCulture
3 жыл бұрын
Yes!
cool video , the book looks s much nicer after that press. a fine addition to your collection . take care and have an awesome day.
@JernosComicsPopCulture
3 жыл бұрын
Thanks, Scott!
Thank you for your patience. I just got me my own pressure. And I'm nervous to start. I've been watching a lot of videos. I am still scared and worried but I'm willing to try it but I had to buy me some low and gray comic books and practice.
@JernosComicsPopCulture
3 жыл бұрын
It will come to you! Just make sure to practice a lot on non valuable books!
You made it look easy… Thanks for the post, I’m definitely subscribing..
@JernosComicsPopCulture
3 жыл бұрын
Appreciate the sub!
Great how too. Keep it coming and hip hop ambition as rider.
@JernosComicsPopCulture
3 жыл бұрын
Thanks, man!
@austincrafton178
3 жыл бұрын
Your so very welcome be safe.
excellent!
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
looks way better!
@JernosComicsPopCulture
3 жыл бұрын
Thanks!
I think some 25 cent practice books are in my future, thanks for sharing.
@JernosComicsPopCulture
3 жыл бұрын
Ohhhhh yeah!!! Good luck!
I really liked this video. Will you be sharing some other pressing secrets?
@JernosComicsPopCulture
3 жыл бұрын
I sure will! Thanks for watching!
Nice Job, Looks so much nicer without all the white :D Greetings from Scotland :D
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
I use a different method but I'm also using a different press and paper. results look good.
@JernosComicsPopCulture
3 жыл бұрын
Thanks! What type of press are you using? The one I use is ehhh lol.
He turned a $100 comic into a $1,000 comic!
Great work... thanks for sharing. Have you pressed a square bound book before? Would love to see a video on that. Cheers
@JernosComicsPopCulture
3 жыл бұрын
Still crafting my technique for square bounds. Tricky for sure but I do plan on doing a vid on one in the near future.
It looks amazing wel doen 👍👏👏👏
@JernosComicsPopCulture
3 жыл бұрын
Thank you!
This is great. I have a Newsstand copy of X Factor #24 F.A. of Archangel. it's a 9.8 candidate when I get that spine roll out.
I use a dif method but good job. Use magazine backing boards in case it moves
@JernosComicsPopCulture
3 жыл бұрын
Thanks! yeah the bigger the board, the better
i just picked up a nice copy of ASM 361 that has white pages and with a press would turn into a 9.6. unfortunately, it has a couple color breaks bear the bottom staple, but hey! i finally got me a copy after three years of collecting
@JernosComicsPopCulture
9 ай бұрын
Still a good have!
Great video! Wondering why you put the heavy art paper under the cover?
@JernosComicsPopCulture
8 ай бұрын
Thanks for watching! This does a couple of things: one, it seperates the cover page from the inner pages so the heat can transfer into the cover with more pressure, hence the heavier the weight of the paper, the more that can be pressed throughout the cover. Also, especially on books with newsprint, it won't allow the manufacturing holes that are sometimes at the bottom of the inner pages to press into the cover.
I have 2 presses. One is for cards and for using attatchment cause it has a smaller plate and one is for comics and sublimation
Your putting so many Palm creases omg!
@JernosComicsPopCulture
3 жыл бұрын
?
Nice video Informational bro. Question did you get it graded if so I'm curious on what it came back as. Super clean press
@JernosComicsPopCulture
2 жыл бұрын
Thanks for watching! No, I haven't got it graded.
Awesome video! Super helpful as well. What would u say the grade difference is between now and when u first got the book. Also what was the original grade of the book? Thank you and again awesome video
@JernosComicsPopCulture
3 жыл бұрын
Thank you! I purchased the book off of Mercari, so whatever they listed the grade as, I won't pay any mind to. I estimated this book to be a 4.0 prior to press. It has that big subscription type color breaking crease, as well as a couple other solid length color breaks on the cover. The staining on the back, the spine ticks and spine wear, and roughing around the edges and corners. After the press, I would easily give it one grade bump to a 4.5, possibly to a 5.0. The reason why I wouldn't say it's higher than a 5.0 is because the other defects present are way too large. Now just to give a different example, if this book didn't the big color breaks and had sharper edges and no staining, the spine roll could have brought the book to say a 6.0, and the correction might bring it up to an 8.0. My point is, is that sometimes spine corrections can really bump a book up, but other times there are just too many other defects.
Is it best to put the Teflon sheet straight onto the book instead of the backing board?
I've got one of these. Won't cgc it as it's not worth it but I for sure need it pressed.
@JernosComicsPopCulture
3 жыл бұрын
Great book to own right now!
Looks nice, I will say using that steamer on a pricy book would have me puckering.
@JernosComicsPopCulture
3 жыл бұрын
Haha! I'm telling you, it takes a lot of guts! But also a lot of practice on crap books.
Guys. Guys. Guys.
Great video. Thanks for sharing. I’ve recently seen ads for “facsimile” comic books. Are those genuine reprints or bootlegs?
@JernosComicsPopCulture
3 жыл бұрын
Thank you! As for facsimile books, there are a lot being published right now, so I'm assuming the ads that you are seeing should be legit.
Omg I would be so scared to this with an ASM key lol I’d have to practice on $1 books like 10 times first
Great job! can you tell what model press you use? i need to get one. thanks
@JernosComicsPopCulture
3 жыл бұрын
Thanks, Sam! It's a generic press from Amazon. Many are exactly the same with different names placed on them.
what was the eraser you used, please? i recently received a comic with a white cover, and a black smudge on it (looks it was stood on or something) I'm trying to get a new one from the supplier, but would be great to know how to fix this stuff in the future.
Thanks for this video! Question: Are you placing the comic backer boards shiny side or dull side against the comic?
@JernosComicsPopCulture
3 жыл бұрын
Gloss side is the buffer, and that side is the side that you want the back of the comic sitting on. Thanks for watching!
if i use a metal plate on bottom....do i still need to flip?
@JernosComicsPopCulture
3 жыл бұрын
I would say it all depends on the individual book. It would allow you to not have to on books that might have smaller defects. Even in mine, with no metal plate on the bottom, there are some books that I don't flip simply because the defects are minimal.
Great video, how do you like the Better Sub press?
@JernosComicsPopCulture
3 жыл бұрын
Honestly they are all the same generic manufactured design. The only thing I recommend for folks is to go with a clamshell instead of a swing arm.
Would you recommend this method with square bound books? This video was really useful cuz I was wondering how to fix spine rolls, I always thought they were permanent.
@JernosComicsPopCulture
3 жыл бұрын
Thanks for watching and for commenting! And to answer your question, no, absolutely not. You cannot use this method for sqaure bound books. You could actually split the spine. In all honesty, you are limited to what you can do for a square bound book. You most likely would have to put some type of clamped weight up against the spine while in the press.
Does this last? Will the spine roll come back?
That is a nasty spine roll.
@JernosComicsPopCulture
3 жыл бұрын
Sure was!
i dont have a press but i like watching these kinda videos! cheers if you dont mind me asking, what kind of press do you have?
@JernosComicsPopCulture
3 жыл бұрын
Thanks for tuning in! It's a generic "manufactured in China" press. It's a clamshell press, but it's basically a generic model/mold. I had a lot of issues with it in the beginning and had to rig it to get the pressure decent. Still, the pressure isn't near where it should be. But for now, it gets the job done.
@anthonyshortbox5498
3 жыл бұрын
@@JernosComicsPopCulture thanks for that info. im starting to shop around for my own
Anyone know how much spine roll affects grading? I’ve got a bunch of 90’s minor keys that have slight spine roll and this is something that seems like a very time consuming thing to fix for ONE single copy!
Wow 😯
@JernosComicsPopCulture
3 жыл бұрын
Thanks for stopping by!
@realrude6218
3 жыл бұрын
Was wondering. I really trust your judgement Did you read future state teen titans to your knowledge was that a first appearance or cameo of red x ? Or what’s your take
@JernosComicsPopCulture
3 жыл бұрын
@@realrude6218 I have not read any of the Future State stuff yet. I won't be getting any of my issues until the end of the month because I get the via previews and they ship out in one monthly order.
@realrude6218
3 жыл бұрын
@@JernosComicsPopCulture I see Yea I got a lot of books on order to. That I wish I could read now. Let me know I seen one of your videos on how to check for first. Appearances. I think it is but let’s wait and see. Thanks for getting back brother. ✌🏼✌🏼💯💯
Would a 15"x15" T-Shirt Heat Press work for pressing comics?
@JernosComicsPopCulture
3 жыл бұрын
Absolutely! That's what I use!
Just to be safe, when I steam the spine I hold the book in one hand so I can hold the steamer slightly under the book and let the steam rise to it. This cuts down the chances of water splattering on the book.
@JernosComicsPopCulture
3 жыл бұрын
Good tip! I've actually done this as well just on random books holding the book up so you're not tipping the humidifier. I will say though, the Con Air is usually pretty good and hardly ever produces droplets. I used a knock off before this and it was horrible. Returned that right away.
How do you judge the quality of the staples such that you feel it's safe to use this method? What if the staples are loosening at the spine? Too dangerous? Thanks for the video!
@JernosComicsPopCulture
3 жыл бұрын
Great question and it is absolutely all about using your best judgment. Trial and error and the more you work at pressing, the better you become.
Magic eraser is a form of sandpaper....do not use it 😂
@JernosComicsPopCulture
2 жыл бұрын
How do you categorize it as sand paper? I know that it will eat at your paper if you don't use it correctly, but I will continue to use them the way I do. I have had nothing but success with them. They've never pulled anything off I don't want, including gloss. But you HAVE to be extremely careful and know what you're doing.
@Radial3clipse
2 жыл бұрын
@@JernosComicsPopCulture the sponge is made out of Melamine which is an abrasive material, if the "lightest" sandpaper is a 10 these sponges are like a 3 or 4. They work extremely well but they can very easily remove the wax coating on comics. Now if you know what your doing hell yeah go for it but, with this being shown to so many people and potential beginners I'd definitely be very cautious.
How do you think this correction of the spine affected the grade in before vs after?
@JernosComicsPopCulture
3 жыл бұрын
Great question! I would assume at least one half grade point, possible one whole.
great content. just gave you a sub! question: what is the brand of your 15x15 press? if i only buy one, do you recommend buying a larger press for all my pressing needs? or are there instances where having a smaller press is more advantageous? very new to exploring the art of cleaning/pressing, so any help is much appreciated! thanks!
@JernosComicsPopCulture
2 жыл бұрын
Thanks for the sub Albert! My press is a generic "made in China" type of press, but these usually get the job done. If you are just starting out, it's better than investing 500 dollars in an industry press. Mine is 15x15 and I can press two books at once. Advantages of a smaller press? well, they're cheaper? lol. It's all about asking "why" you want to press. If it's for personal use or just to start learning, I recommend checking ebay or amazing for a clamshell press. You can get a 15x15 for under 200.
What are thoughts on 15 x15 press machines at 40 to 60 dollars and new or used? Like the Conair handheld steamer. Really want to my hand on fixing my own books. Luckily I have a few rough books too practice on. Thanks for this video. Please update us when you discover other tips and tricks.
@JernosComicsPopCulture
3 жыл бұрын
Honestly, I would be hesitant to buy a used press unless I could see it in person or at least see a video of it on and working. If it's a cheap generic press like you see on eBay or Amazon, they are already not the best, but they get the job done. But often times there is shotty welding, or the heat doesn't distribute well, etc.
@spydorweb2008
3 жыл бұрын
@@JernosComicsPopCulture Chris i did some looking for 15x15 heat press machines new on Ebay lowest 170 to 200. I did watch your mylar bags video in your opinion what the best inexpensive brand for 2mil silver mylar 100 count with or without boards?
Scared too do this...how much for a press?
@JernosComicsPopCulture
3 жыл бұрын
You can find a decent generic press for around 150 or 200. They usually get the job done decently enough, especially for beginners.
aped 3 suggested UV light to whiten the pages, does that dry out the paper?
@JernosComicsPopCulture
3 жыл бұрын
If the page was all white, maybe lol. But I would not expose any pages of a comic to UV, because although it may whiten the paper, it's going to fade the ink.
hi new subscriber here, how many minutes is recommended for a heat press that only goes to170 degrees for pressing comics, any help would be great TY
@JernosComicsPopCulture
2 жыл бұрын
Thanks for the sub! To answer your question, it's all about trial and error. Every press is different. Even on a specific temperature, some presses may heat slightly hotter or cooler. For me, I use 175 for 5 minutes, but that's only with books with the newspaper stock pages. Any modern book with the magazine type paper I use 145 for only 30 seconds.
Do you do this in the Sac area for people? How much do you charge?
@JernosComicsPopCulture
2 жыл бұрын
I currently only press my own books. I hope one day to offer it as a service.
What press is that and do you remember where you got it?
@JernosComicsPopCulture
11 ай бұрын
It's a generic 15x15 that i got on Amazon
How long and how much force does it take if you have a 100 Page Issue ???
@JernosComicsPopCulture
3 жыл бұрын
Well considering most 100 page comics have a square bound spine, you want to limit your pressure/force. If not, you will do more damage by flattening the spine. I would start with the most minimum of pressure.
Hey man don't know if you'll see this but I have some comics to be pressed and cleaned but no services are offered near me. Should I send them to be pressed by a company or person or let cgc clean and press them. Thanks in advance
@JernosComicsPopCulture
3 жыл бұрын
Hey Chris! Honestly, I would never send my books to CGC/CCS to press them. I've heard too many horror stories, plus many times I've heard books getting cracked, sent there to get pressed, and end up getting a lower grade when reslabbed.
@chriskillz3994
3 жыл бұрын
@@JernosComicsPopCulture thank you for replying. I've heard those stories also, and I've seen the product when done right by them and it looks pretty good. My problem I'd have to send them to get pressed by someone I don't know. I feel like if cgc screwed them up I'd be happier with their replacement offer than Jim bobs press shack (lol you know what I mean). Definitely a decision needs to be made and your concerns are duly noted. Thanks again
👍
Can you use distill Water ???
@JernosComicsPopCulture
3 жыл бұрын
Ah I actually should have mentioned that! Distilled water is the ONLY water that you should use!
Do you do pressing & CGC submission?
@JernosComicsPopCulture
3 жыл бұрын
I do not at the moment.
@potentialhotcomics2716
3 жыл бұрын
@@JernosComicsPopCulture Thanks
How do I fix the nasty spine roll in my brother?
@JernosComicsPopCulture
3 жыл бұрын
Ouch! lol Might be out of my realm of expertise!
Hi Chris I watch your video's religiously and I finally got up the nerve to buy a press (15x15) and my books come out amazing (using your techniques) but one thing I did notice is that sometimes when I put a backing board in the center where the staples are, the book is sort of puffy on the spine when it's all done. Could this be because there needs to be more pressure?
@JernosComicsPopCulture
2 жыл бұрын
Hi Shawn! Glad to hear of your successes! You might actually have TOO MUCH pressure if there is any issue with the spine. I would try taking a little pressure off and see if that changes anything. If it doesn't, then it might not be due to the backing board, and it might just need more pressure to flatten out the spine.
@shawnburke2102
2 жыл бұрын
@@JernosComicsPopCulture Hi Chris, I took your advice and backed off the pressure a bit and everything looks great! Thanks for your help!
@JernosComicsPopCulture
2 жыл бұрын
@@shawnburke2102 That is awesome!
What kind of steamer is That?
@JernosComicsPopCulture
2 жыл бұрын
Con Air
I like your videos...you do different shit then other people..@HOODWOOD COMICS
@JernosComicsPopCulture
3 жыл бұрын
I appreciate the feedback!