Seems to me like your machine already has "Improved Version" Suspension Rods.. I also have just put those "Improved Version" Rods but there's no improvement, in my situation. Before I'm able to get another machine, which WILL NOT BE A SAMSUNG, i'm going to re-pack the Tub Spindle Shaft with some Lube and see if it works. Any idea?

My sister had a front loader that shook aggressively. Saw another KZread video that said to remove the shipping bolts. We did and the washer is completely normal. 100% fixed the problem.

A 26 inch bicycle inner tube works great also , stretch it around tub , inflate it and done 😂😂😂 Great video btw , i subed 👌

Hi, i have a problem with my washer. No code error when starting the cycle but nothing really start, juste the clic, Door locked, and then nothing happening. I try spin only, rinse and spin, samedi result. Any idea of the problem whst coule be? Tks

Thank you for this idea and creating this video! You're a genius. These machines are the absolute WORST and horrible safety design. However you gave me the idea that I will use when I eventually purchase a washer when I get my own home.

Excellent Good job I'm going try that.

I like the Video, It Was helpful.

This machine had a recall...Samsung will fix the rods for free

@terrycaldwellORST

4 ай бұрын

how do you get them to honor this?

Hey I watch this video on how to fix the issue. It kinda work but what I did learn? Is how to fix the suspension. I didn’t know it was that easy so still a good video. Lol

@BreakEveryChain3

Жыл бұрын

Great video gonna try it cause it's running my wife and l crazy.

mines is making a sound but the spinner is not even moving what does that mean? It's telling me I have a DC problem?

Siempre se trata de resolver con el menor costo posible😄😉

Yes it did i have the same washer thanks for the video

I put the foamy around to keep the balance. And works perfectly but when is half way spining suddenly stops againg and start add water do u think is the clutch??

@bocadillo83

Жыл бұрын

Me esta pasando igual

@dylanowens3173

Жыл бұрын

Yours is a tub bearing problem. Once the suspension rods if left in fixed and dibstupid things lie,in thos video then the tub bearing and tub mounting plate /hole go bad /loose/ enlarge allowing the tub to be further out of balance. Eventually the tub will be so loose nothing but a new inner tub will fix the problem and is so expensive not worth doing it unless get a free washer for parts to fix.

the suspension bars were made thicker by samsung to address this issue along with other fixes as well

Replace the suspension rods. About $50 dollar fix. Just did mine.

@emyhR

Жыл бұрын

What if brand new washer?

@kidsmithree

Жыл бұрын

@@emyhR Then it should be a warranty issue.

My wagner does not spin. Can you help me and i años santo to clean the pump filter

@renerosen3909

Жыл бұрын

I wanto to clean or replace the pump filter

great information. Thanks...(.not sure what the music is suppose to do. I muted the video most of the way.)

@gustavogomez2316

2 жыл бұрын

So it won’t have an awkward silence. And have something in the background…(Seems like you’re new to the internet 🤯🤣)

@whitneyg.6332

2 жыл бұрын

I agree with Jacpost I think the background music possibly has some room for improvement in future videos. At times the music was louder then it needed to be since it was hard to hear what you were saying at times let alone that the song itself was quite annoying to listen to. But over all it was a good video and clever way of getting the problem fixed. It would be interesting to see how long this repair lasted for you. Please keep us posted!

Replace the suspension rods and it will fix the problem correctly

@jaycole3768

Жыл бұрын

I changed the rods and it still. War else should I check

@javiercoronel1169

Жыл бұрын

Send funds via cash app

@FixitFelix529

Жыл бұрын

$Troy529 Cashapp 😄

@joextreme

Ай бұрын

@@jaycole3768 spinner nut inside the drum, take cap off, use a 10 mm socket to remove the screw then a flat screw driver to lift the plate but its a pain in the butt, then you should see the spinner nut, mine was broke replaced it and used a wrench to tighten, you have to tighten to loose left, but dumb machine gets to spin then adds more time to add water and rinse, had previously replaced rods, pile of junk.

Am I missing something because it’s still noisy as hell and jumping around

@theonlyyari

2 жыл бұрын

Check the balance/ level to adjust Incase it's not balanced by the floor

@SicilianSVT

8 ай бұрын

It has bad bearings like mine.

I got the same model, but it won't spin at all, all i hear its grinding noises, and thats it, any ideas ?

@aziz_pioneer

3 жыл бұрын

The grinding sound is the bearing issues

@fixingwhatican3742

3 жыл бұрын

@@aziz_pioneer am sorry but that dont tell me anything, so what to replace ? Motor ? Clutch assembly ? Could u be more specific ?

@erickleos2994

3 жыл бұрын

I can be a little more specific PICK UP THE PHONE AND CALL A SERVICE TECH!!!!

@fixingwhatican3742

3 жыл бұрын

@@aziz_pioneer As a update, for future people, i bought a multimeter to test my motor resistance, motor was fine, i test the clutch actuator and it show low, so i replace it i also did alot of cleanig on my motor before i put it in, alot of greases on it, the machine started spinning for a while then stop, after more reserch i notice the if rest my self on the door,achine will start spinning or stop spinning if it was already doing so, so i went and replace that, Washer its working with out problems now, both parts was abt 70 used, any how thank you for trying

wow just like new......I will try the proper way.....almost was going to get noodles

A for effort

I changed the rods and it still shakes

I replaced all 4 suspension rods and im still having the same issues of it shaking and making alot of noise. Any other ideas?

@JoseMartinez-bs8oi

7 ай бұрын

Samd thing.

@SicilianSVT

6 ай бұрын

@@JoseMartinez-bs8oi I ended up taking it apart completely, and almost the whole bottom was broken. I will never buy samsung again

I think the washer drum is supposed to have room to move to keep the washer from shaking. I believe If you're gonna fix it. Might as well do it properly. I or get a new one. I like the effort but not the result.

Samsung Washer And LG = Garbage Never Buy That Brand. Whirlpool Is The Best, The Cheap One 250 Dollars Wash Better Than Any Expensive One.

@LOGICAL-JAY

2 жыл бұрын

Yes indeed..I have a whirlpool in one house and a LG front loader in my other home..Samsung is the worst nowadays. .even when it comes down to buying tvs I left Samsung alone and went with LG oleds in my homes..Samsung used to be good in the beginning.. theyll put out a great product and then run on name recognition for a few years..later on they'll start to BAIT and SWITCH with their products..but I've caught on to what they've been doing over the years..

Samsung is the worst. I have it on spin only and the error pops up and randomly starts giving water!

@jamaisjas

Жыл бұрын

have you fixed it yet ?

@babisilent

Жыл бұрын

@@jamaisjas maybe. My techie sense had me "restart the computer". I turned the washer off, took the load out, unplugged the it for 30sec, plugged it back in and put my load back in. Turned it on and set it to spin only and it worked like new! Although, this has happened before so I have a feeling it'll happen again. The only logical thing I can think of that could've caused this is that I had a hefty load before this load. Honestly wasn't that heavy but the washer is so sensitive!

Youst change the base of the bottom of ajitador There like a little Union that keeps everything straight

@armandocalvillo2266

2 жыл бұрын

If you don't fix it you will have problems bearing and the seal and that is more money

You've just tightly coupled the motion generated by an off balanced rotating mass to the whole washing machine body by stuffing those noodles in there. By the way it seems to get worse at certain rpms/frequencies, likely a function of the properties of the suspension springs, it seems that there is supposed to be a vibration dampening element in those suspension struts that has worn out. A better solution would be to study how the struts work and find out why they aren't damping (absorbing) the vibrations anymore. My guess is they very simply rely on the friction between the upper plastic piece that the spring presses against and that the washer drum rests on. Its If you disassemble the strut and heat up that one plastic piece and were able to compress the plastic so it tightly fit on the rod again I bet that would remedy the problem.

@b5a5m5

2 жыл бұрын

Yep, I was correct. Check this video out for a comprehensive repair of one of these suspension struts kzread.info/dash/bejne/e46OpdmRddCtmKg.html

@VirtualShelling411

11 ай бұрын

Yes you are right and there seems to be a few hacks that I’ve read in the videos comments that could work with spending the $120 bucks for new rod and spring assemblies

i have same issue, changed the rods and still doing the same problem, any ideas?

@ritzkovi

3 жыл бұрын

Your balancing ring is faulty. You can either replace it or drills holes at the bottom to remove water and you'd be fine (see youtube video on this).

@Mr.REEP0

2 жыл бұрын

@@ritzkovi where's the ring at

Had the same problems so I went with LG 3700 front loader and it's like night and day..no problems

Es. Verdad. Todos. Keremos. Ahorrar. Dinero

Was that the Sugarland dollar store

@FixitFelix529

Жыл бұрын

Lol. Yes

@shittywitty09

Жыл бұрын

@@FixitFelix529 i thought I recognized it lol I'm youtubing videos on a washer found on the side of the Rd

That yellow cable holding on for dear life

This does not work. Seems like it should but doesn't.

The problem is the the washer nut is loose

@t.n.tforever3400

2 жыл бұрын

Washer nut?

@terrycaldwellORST

4 ай бұрын

@@t.n.tforever3400Probably referring the to giant nut at the base of the drum under/ attached to the motor itself. Not too bad to get to. unplug, lay it down, and its all right there using a socket set

Made my issue WAY worse!

I shoved seat cushions down the sides and so far it’s not shaking

Wife only had 1/4 of a load very light load!

I don’t have that model but mine imploded Sunday it blew out the front and sides I wish I could put pictures on to show you I’m gonna look into a attorney and see what can be done its still under warranty and they are going to come and take pics of it it even did something to the dryer when it blew

@FixitFelix529

4 жыл бұрын

I know this Samsun washers had a recall for something like that

@LLWW

4 жыл бұрын

Yeah this washer was recalled for the top exploding off it and hurting people. Their solution was some extra brackets to hold the top on and to say not to wash bedding on anything but delicate. Excuses excuses samsung sucks. They dont stand behind their product and the customer service is horrible. Also have you seen the cleaning videos for their washers? Makes me wanna gag it's so nasty.

@tgriffin6938

3 жыл бұрын

What where you washing in there with it came apart?

@MichaelRobinson-gz2kj

3 жыл бұрын

@@FixitFelix529 It was uneven.

@acetech9237

2 жыл бұрын

Good luck suing

The bearing is broken. You will neeed to replace it. Expensive.

sup?

Do not do this!!! The problem if caught early is a suspension rods $30-$60. If left unfixed and do stilly "fixes" like in this video, the suspension rods will just get so bad then will cause the tub bearing and inner tub to go bad. An inner tub bearing then costs $60 to $120, and a bad inner tub is not worth trying to fix unless get a free parts washer one to swap out. So just get the suspension rods before the problem gets worse. Or junk Samsung or LG appliances and never ever buy them again , as appliances from these 2 manufacturers are just pure junk.

@trythis2821

6 ай бұрын

I've had my Samsung 8.5kg top load washing machine for 8 years now and has just developed this banging problem. Will try replacing the suspension rods, pretty sure is the issue as tub does move easier from side to side than it should.

Your inner tub is worn bro junk it

suspensión rods are very costly

@terrycaldwellORST

4 ай бұрын

Not aftermarket they're not. 30-70$ depending on which you buy

LoL. Good try. Lol

Cmon, man. It’s a Mickey Mouse work. This will end up with a further pricey problems. It looks you know the subject, so why don’t just order new suspension shocks then showing your audience how not to fix?!

What honk jonk this is Mexican made

“Way better then before” 🤣🤣 my man appreciate you trying but you didn’t fix the problem at all. The suspension rods and bearings need to be replaced asap.

And that’s fixex🤣?

That’s one way to die

Wtf dont do this. It's the suspension rods and cost $40-60.

That’s the sound of garbage.

@madelineolivia11

2 жыл бұрын

🤣💀

Oh man... the music is so annoying

Washer galloping like a horse

Wasted my time

What a waste of time.