⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzread.info ⛐ Our Donation Link: gf.me/u/y59hvn

@Hipsters_N_Hippies

3 жыл бұрын

Auto repair guys, the guys who fix other guys stuff. All by moving these guys and those guys. To reach this guy and replace these guys. Do you guys know what I’m saying about the auto repair guys?

great video. this is what i need to do, i recently painted my truck with good products and had orange peel on it from the clear coat

Thank you for the simple guide video. Will redo my clear coat after watching this video.

Great vid! Thank you so much! THIS WORKS!

Looks incredible. Great work!

Thanks for sharing really helpful!👍🏼

Great! Thank you so much for explaining and showing how you do this!

You guys are the best, you keep it simple and easy, never overdoing and overthinking things. Thanks for your practical videos

Thank you. You have given me hope in repainting my car. As I know that the paint job won't be very great with rattle cans but it can at least be sorted out afterwards

@8Cylindres

2 жыл бұрын

I've painted my Silverado with rattle can (3$/can) and it look good tho, was afraid to do it but I will give it a try now too !!

@RealTalkInAmerica

2 жыл бұрын

Yeah, same here, I painted my Civic with Rustoleum rattle cans........at this moment I'm letting the clear coat dry so I can continue with it. I've seen so many great long lasting results from people using spray cans, as long as every step along the way is done correctly the results will be fine.

Marvelous work

Looks way better. Attention to detail. Good job

Awesome video! Thanks so much!!

Nice outcome good to see a lot of orange peel being removed and a good result thanks for taking time to upload

Amazing job and presentation thanks

Great job guys, hope mine comes out the same.😍

Thank you sir......My car is pitch blk so I plant to use exact same steps in a couple days.

Insane job🔥

Vrhunski odrađen posao , svaka čast majstore !

Looks really good man 😀👍👍

Amazing work guy’s. I wish you could do a paint job on my car. Keep up the good work, you’re very informative 👍

Amazing I'm going to paint my truck with tractor paint. And I am going to use the things I have learned here to make it look amazing.

Good work brother just wow😱

Great explanations!

Thanks guys, i need to do one whole side of my EP3 after bad a hedge scratch spray job from a previous owner!

can you only fix it like that if its the clear coat that has orange peel ? or if color paint had orange peel as well can this be fixed like this too?

Can I buff the paint after wet sanding with an orbital buffer? I have a Griots Garage random orbital buffer. Basically it does the same thing but it also moves side to side so you can't burn the paint and the buffer you have only goes in a circle.

So I have a large orbital waxing/polish machine, but the pad does not come off, you just slip something over it. Can I use this type of machine for a compound?, Or I have a Dewalt random orbital sander, would this machine work?

Beautiful job

Thank you..great video

Great video guys

Great job

Thanks I just had my car painted, n have a lot of orange peel thank you,,

Result is great. Less great is that you use dirty polishing pads when buffing, at least it seems so. What about holograms after polishing. 95% you have to finish with a DA polisher to remove these fine scratches (they leave some clouds on the paint).

@maksymilianwlizlo1099

2 жыл бұрын

Mate idk what they're doing but u can still see sanding scratches through their polishing, prob didn't clean sandpaper and rubbed dirt into it and go deeper scratches

Thank you for replying,I have a tin of paint which came with the car,it is ,Biloxi Cellulose Enamel.what do you think. Regards Mark.

Can I do this a day or 2 after putting clear coat on

Thank you very much

Thanks for the content. Really helped me after my touch up on the rear bumper showed a lot of orange peel. Many thanks

@Harpreet13013

2 жыл бұрын

So did you just sand and compound and polished or used clear coat as well ?

I plan to recoat over my existing clear coat on roof of my car. Its a 2014 car. Should I use 1500 grit or lower?

That’s interesting the way you load the compounds onto the paint and then run the machine. Seems like an easy way to deal with the stuff

@KeiOfficeNyox

2 жыл бұрын

Was thinking the same. Never thought of that.

For those wondering the difference FEPA and US CAMI, P1500 = 800 US CAMI and P2500 = 1500 CAMI.

nice job man

sprayed y classic car and parts came out like this but its not clear coat its gloss paint 2 pak will this work for just the paint

@simonjordan1790

3 жыл бұрын

Yes mate. 2k or direct gloss can be flatted and polished. It’s messy though because you’re colour will come off as you sand

Can i use ultimate compound and polish as substitute for those 3 bottles?

@renogunzddragon1900

7 ай бұрын

Yes

Nice 👍🏼

can this be used on single stage no clear coat?

What is optimal temperature for doing this?

The link provided For the polisher isn’t the one used in the video can you please let me know what polisher and model you used thanks in advance

@playtowinthegame3761

Жыл бұрын

it's a Chicago Electric polisher from Harbor Freight (home brand)

What a great video 👍A question if I can.I have a old 1600E cortina that was resprayed 15 years ago with heavy orange peel do I use the same technique to remove or not. Regards Mark.

@CROMAT30

3 жыл бұрын

unless its 1 step paint...it should work the same

What if it looks like that but it doesn’t have a clear coat on it. Can I use the same method?

Is the process easier if the orange peel is in my clear coat? 3 layers was sprayed back to back without time in-between- im not sure, but i think i suppose to wait between layers but how long?

@calebforester418

3 жыл бұрын

Every clear has different times in between coats, that's called , flash time.

I didn't have the busget to use a 2k but I did use 2 coats of Duplicolor gloss clear engine paint. I chose this because it has ceramic in the paint and is super hard, and chemical resistant and heat resistant up to 500 degrees. Problem is it is SUPER HARD to sand down by hand because the clear coat is so hard. Will this technique still work. Also I have a ceramic spray as well. Would I still use it with all the glazing and stuff you used or use the ceramic spray instead of those last few steps.

hi, I was wondering if the paint job was already clear coated or is this procedure prior to clear coating?

@markanthony2015

2 жыл бұрын

Yes this after clear coat

My Aygo has it and I’ve just noticed. I couldn’t care less about the uneven light finish. Mine is along the bottom edge on either side. Can this make rust easier?

@bendude6748

3 жыл бұрын

That’s probably stone chip coating rather than orange peel, it’s to protect it from road debris causing chips and rust, most cars have it these days.

If you have a DA machine you can also folow up with 4k and 6k sanding discs on it and polishing will be allot easier.

@calebforester418

3 жыл бұрын

I usually do 2,3,5 and finish with 8000 and makes life a whole lot easier for buffing.

@stranger07.44

3 жыл бұрын

@@calebforester418 not being a smart a** but you're spending way too much time & effort & that sounds like a lot of unnecessary clear is being removed. With the right compounds & buffers I never sand above 3000, a lot of times I dont even go that high. I use a 15mm throw DA with 5in disc. For heavy cut I would use 3M Perfect It #1 but it dusts way too much so I switched to V32 from Chemical Guys IF I need a super agressive cut. Just changing from heavy pad to orange or lighter will adjust to a med cut. Then I follow with "3D- ONE" on my Griots polisher (8mm throw) . The 3D-ONE is a hybrid compound that you can orange (or yellow) pad first then, use same compound on white or black pad & it finishes as a polish with a very nice shine. Most times the 3D-ONE with a yellow pad is more than enough for heavy/moderate correcting so I'll just go orange then white (All Hex Logic pads). U will save a lot of time & end up with the same quality finish . Hope that helps

@thomas9434

2 жыл бұрын

@@stranger07.44 sorry I'm pretty new to this but, will my dual action polisher work to polish these types of scratches after sanding? And will I need a hard pad and strong compound?

@stranger07.44

2 жыл бұрын

@@thomas9434 a rotary is something you should avoid as a novice. The reason ppl use DA is it's a better finish & it's kinda idiot proof l. I've tried to burn paint with a da and but with the newer compounds, the quality is good enough that messing up is harder than it used to be. U can cut orange peel with a Da, a yellow pad + V32 from chemical guys but a wet sand would be faster then buff with a medium compound and an orange pad. And polish with a polishing compound and a black or red soft pad

@thomas9434

2 жыл бұрын

@@stranger07.44 I've just sanded a bit down but there's a colour change that needs Sorted, going to hit it with the da, orange pad + farecla g4 pro and hopefully it blends ok, then try using a softer pad and my autoglym polish? (Using these items since they're local to me)

nice job

I used 800 grit before basecoat now after clear coat and buffing I can see deep circular marks. Any idea what I done wrong?

@zacharyy8985

Жыл бұрын

Wet sanding is 1500-2000 800 is too hard

I sprays my car a few days ago with 2k clear aerosol, and the result was total orange peel. I thoroughly sanded with 1500, followed by 2000, 2500, and 3000. I then buffed it with farecla G3 paste, and the result was a hazy and slightly shiny finish? I then resanded with the same paper grits as before, and improved the finish quite a lot, but it was a really long slog,cand the result still isn't as good as a paint shop,cany ideas what i might have got wrong?

good worl guys 👍❤️

This was the best video I've watched on removing orange peel. Great job brother.

@wallncuz3109

2 жыл бұрын

Orange peel was still there at the end... even with him trying to hide angles

I tried to do this but it didn’t come out I’m not sure if it’s because I used 2k clear coat when painting my car

Hahaha his assistant like to put waaaaaaaaaay to much product, dude would keep saying lite layer and then he would glob it on... was funny to watch

What if u have a clear mix into the paint??

does this method work and on a plastic parts if i have orange peel ?

@calebforester418

3 жыл бұрын

Yes as long as there is enough clear on the part.

Hi everyone I am a complete noob when it comes to painting cars so was hoping for someone to be able to answer a question of mine. I have a honda civic and wanting to change the colour from silver to black. If I buy some crap $80 paint sprayer from amazon I assume it will result in a orange peel. Would I be able to just repaint the whole car with that and then do this process afterwards? Would this work and how decent would it look? Thanks!

When I do research it says use 400 grit or 600 grit for cleat coat

So I’m curious. Does the car stay like this? Or do the compounds fade in a couple months?

Instead of sanding it, can I re-paint with spray max 2k again to cover up the orange peel? would extra thicker clear coat covers up the rough/imperfection? Thanks in advance.

@loo2402

Жыл бұрын

No . It will keep the same structure, only thicker .

@callmebackfriday2

Жыл бұрын

@@loo2402 Thanks for the information.👍 Let me check with my friends whether they have polisher/buffer I can borrow.

Hi Guys, can I ask how long you should wait for the paint to cure before attempting this?

@avnirexhaj7395

2 жыл бұрын

Two stage paint would take between 24 to 48 hrs for the clear coat to dry, but you should wait 1 month to ensure proper curing of paint to attempt wet sanding rubbing compound, polishing and waxing.

Good vid but there are a few problems with this method and a few misinformations. First and foremost orange peel like that is caused by poor gun setup, not the right materials for the temperature or user error. If undergoing this procedure use at least 3 coats of clear or you will rub too much off and loose protection on your basecoat. Secondly by doing this you will have glass like finish that doesnt match the strucrure of the rest of the paint and mostly looks awfull and repaired to everyone that knows anything about paintwork. Thirdly as stated before this method usualy isnt used in bodyshops. The only thing we polish are local dirt nibs, the off the gun finish should look as good as the factory paint. We only do this on more expensive cars (bentleys, lamborghinis, etc - cars which are wetsended and polished from factory) I understand this is diy, but probably better to perfect the painting strategy to only sand out dust nibs (yes it is possible at home). Thats why good bodywork is expensive it takes time to learn. Anyways dont take this as me being a wiseguy just correcting some points you made in the video, and to tell you practice makes perfect. Besides that very good content guys! Keep up the good work

@LassetUnsSpielen

3 жыл бұрын

thanks for that. the supplies used are a bit expensive for a small one-time-project (guitar). I tried using old polish compound from 1980 and it didn't do anything, the dull sanded spots are still visible, so I figured i should just apply another clear coat and live with the orange peel. any idea how i get that wax stuff off?

@timiracko6317

3 жыл бұрын

@@LassetUnsSpielen the only way to get it of is a silicone remover. You can get it at any paint supply store, clean it with it at least 3 times, sand the clear coat and clean again

@LassetUnsSpielen

3 жыл бұрын

@@timiracko6317 wow, damn, i thought i was almost finished. thank you

@wallncuz3109

2 жыл бұрын

You said it best. And the orange peel was still there at the end.. so when you say you sand out dust nibs, you clear, sand, clear , sand , clear?

@timiracko6317

2 жыл бұрын

@@wallncuz3109 no when the nibs are sanded they are only polished. There will always be dust nibs no matter what. But the point is to only sand the nib and not flatten the sorrounding clearcoat so the structure stays the same

are the details in the description below?

I know you said terrible orange peel but the sound of turbo orange peel is even better.

Dude, can i fix the hood wrinkle/ chemical reaction paint on the bonnet by buffing?

@andyshuai8024

3 жыл бұрын

Wrinkling can only be fixed by a complete repaint

If you black has orange peal, do you still do the clear coat then this method to get rid of it? Or do you have to do it to the paint before the clear coat?

@saulgonzalez8117

Жыл бұрын

Would like to know also

@twistymcfistysback

Жыл бұрын

@@saulgonzalez8117 Well I rolled the dice and did it this weekend after watching more vids, Light even coats of black, clear coat within 1/2 hour of spraying the black, I did 2 light coats, then a medium wet coat, waited 2 days, wet sanded 1500 then 3000, cleaned with alcohol hen used some cheap drill buffing attachments from amazing with buffing compound and the result was impressive. After wet sanding it it looked matte and dull, didn't think buffing would do anything, but 2 passes and it shines.

@saulgonzalez8117

Жыл бұрын

@@twistymcfistysback thank you brother I will give this a try this weekend 🤘 thank you

Using wax or polish?

How many days after painting should we remove orange peel

If you're new, use a dual action polisher as you can easily burn through or create holograms

@bendude6748

3 жыл бұрын

Problem with using a DA is you’ll be there a lot longer for something like this

@RedlioNxTR

3 жыл бұрын

@@bendude6748 not if you use the correct product and pad

@bendude6748

3 жыл бұрын

@@RedlioNxTR You might get somewhere close but a rotary will cut faster

@RedlioNxTR

3 жыл бұрын

@@bendude6748 sure, that's why I'm saying if u are new..

@yesmilady1

2 жыл бұрын

@@RedlioNxTR yes good DA like my Flex forced rotation works a treat no need for rotary.

Challenge: Do a shot of vodka every time you him say "OK" By the end of the video, you will be Russian drunk... prove me wrong

How hard are you pressing?

According to the house of Kolor ,and i completely agree with them, using more than 400 to 600 grid does not help for the new paint to stick to the old one !

That painter should not paint again haha

@grantssmartrepairs

3 жыл бұрын

thats what i thought 🤣🤣🤣

Car is so shiny i can see who is filming u..lol

Just use denim pad on DA with heavy cut compound. Saves alot of headache.

Where are you from? Greece? Bulgaria? You have an interesting accent I’ve never heard something like it before.

You should use water with the compound that way it doesn’t dry out in the sun Also I’d say thin your clear coat out from the start and more coats you’ll get a better finish and save the extra work

@nathancarruthers254

3 жыл бұрын

If the data sheet says no thinners in the clearcoat, then you shouldn't be adding thinners. Thinners causes the solvents to evaporate quicker than what the actual curing time is. Also for saying add more coats to get a better finish. 2 coats application is the most recommended for all HS or UHS clearcoats. The more clearcoat you apply, you're going to have curing issues and flexibility issues.

@shawnm2113

2 жыл бұрын

Water? No sir. Trust your product. Chemical guys promote a product that you spray your pad with before adding your compound... Waste of money. Watch Esoteric's video explaining this with a scientific method that is blatantly obvious to see.

@shawnm2113

2 жыл бұрын

Water? No sir. Trust your product. Chemical guys promote a product that you spray your pad with before adding your compound... Waste of money. Watch Esoteric's video explaining this with a scientific method that is blatantly obvious to see.

@OFFICIAL_DSR

2 жыл бұрын

@phuture have you ever tried it or have you just read the bottle?

@OFFICIAL_DSR

2 жыл бұрын

@phuture well I’ve not had any problems and I use this method to polish glass

He sounds so funny! I could listen to the goof talk all day. I love this channel.

@lordleatch

2 жыл бұрын

😂

Drinking game: take a shot everytime he says guys Nevertheless it's a very good tutorial.

@shurikenX

Жыл бұрын

Level two: drink everytime he says OK

Will this add horsepower to my 5.4?

14 times said "guys" in 1 minute😅

Pause / freeze the frame at exactly 10:29 - our friend has devil's horns! 😄😄

Whoever painted that needs to get slapped and fired

@kenkos5904

3 жыл бұрын

not sure if I can fire myself.

@cedricwilson4771

Жыл бұрын

Lololol🤣🤣🤣👊🏿👊🏿 can't fire yourself boss shyt💪🏿💪🏿💪🏿👑👑👑

@czarli

Жыл бұрын

Lol that’s what mine looks like after spray painting it.. at least I see that I am not completely shit out of luck

What does redlining a parked car and showing tips of tailpipes have to do with this video?

Is orange peel from the base coat or clear coat

@rickbalderas7153

3 жыл бұрын

it could be both

Drinking game. Take a shot every time he says "O.K." 🥳🤣

@The_Real_Indiana_Joe

3 жыл бұрын

I passed out 3 minutes in.

Minutes more like hours!

Thanks for this video

First off all , you have to tape the edges and around the lights ,second of all , 1500 is way too rough to use on clear coat , you should start with 2000 , then , 3000 , finally 5000 then buff it.

@jaya.0069

2 жыл бұрын

His work looks great, he apparently knows what he's doing!

@peterseinfeld

2 жыл бұрын

lol why don’t you post a video showing how it’s actually done then . You’re all theory and no action .

👍🏽👍🏽

Ok.

Please nobody machine polish like this!!!! I've never seen so much product wasted in my life

@KronicDaydreamZ

3 жыл бұрын

I'm glad I'm not the only one

@giovannigiannotti1231

3 жыл бұрын

Me too i ll be fired if my boss see me doing that. I Aldo wonder what the car is going to look after the first wash. All that compound is just hiding the real resault

@therealCompactO

3 жыл бұрын

They should use KZread to educate themselves 🤣 what a waste of time product and everything 🤦

@nathancarruthers254

3 жыл бұрын

Anything more than a fingernail size is unnecessary, you actually cause more swirl marks with to much polish, because the courseness of the compound is very abrasive. Also I would love to see this after its first wash

@bill6023

2 жыл бұрын

I noticed when he was showing the 3M compounds and the buffer, he said "we ran out" so we're gonna use the Turtle Wax. Well, if you wouldn't bathe the quarter panel in 3 cups of cutting compound you might still have some left, just saying.

okey guys 😁