The first half of this video was very informative as far as cleaning the unit. After that it turned into a "What's he doing? We can't see it?"

@VacMaster1991

3 жыл бұрын

Lol I know. This is before I had an editing software

I love my Shark, it is over ten years old. I do all the maintenance on it myself. The life of your vacuum depends on how you keep you filters and hose clean. Oh and don’t forget to clean the beater bar.

@VacMaster1991

2 жыл бұрын

Exactly

Thank you this was a HUGE help. My filters were as bad as this person's lol now they are clean and drying! Fingers crossed the vaccum sucks again!

@VacMaster1991

4 жыл бұрын

Your so welcome, I'm glad the video helped

Thank you. My husbamd said he tried everything to fix tbe suction until he seen your video. I already bought a new shark (different model) which SUCKS. actually it doesnt suck very good. And it tips over evey time i use it. I still want two vacuums one for house and other for basement and garage. Thank you for video. I'll update if this works. 👍💗

@VacMaster1991

2 жыл бұрын

Your welcome

Thanks!! I knew about the foam filter but not the second filter by the motor!

@VacMaster1991

3 жыл бұрын

Glad you're found the video help

@andreabethel7322

Жыл бұрын

Yeah, that's all I knew about too. And yes, it was pretty bad. Its air drying now. I hope this works

@VacMaster1991

Жыл бұрын

It should work better now

Thank you. We just cleaned the filter and once again the vacuum really sucked 😉

@VacMaster1991

6 ай бұрын

Glad I could help

The best vacuum ever

I would honestly replace the body unit itself since it has been used so long

I have a Shark Navigator Liftaway vacuum cleaner (purple). I am having trouble with both latches on the removable canister. They don't stay locked. I don't believe they are broken however, they come unlocked as soon as I turn the vac on.

@VacMaster1991

4 жыл бұрын

Wow. Ok well. I'm not sure how to help with that. I have never repaired that specific model yet. I would ask shark.

@krisfairchild2974

3 жыл бұрын

Sand bottom of plastic nub. Ally layer of good Hot glue or epoxy to build up....adjust when dry with file.suction created on turnon pulls canister Down...

Informative video. How does one attach the red tab next to the S hose in the back if it pops off?

@VacMaster1991

3 жыл бұрын

It clicks back in. Pretty simple. Just line it up.

@mubeenali5505

3 жыл бұрын

@@VacMaster1991 Thank you. The red tab popped off and I have been trying to pop it back into its place. I have no idea where the spring goes. Google hasn’t been helpful.

@VacMaster1991

3 жыл бұрын

@@mubeenali5505 sadly this was someone else's vacuum so I can't show you. Contact shark for help

Fascinating!

Hey I just scrubbed & hose rinsed my nasty not to blackened hepa filter. How long do I have to wait until it drys in the sun to replace ?

@VacMaster1991

3 жыл бұрын

Don't dry them in direct sunlight. Put them in front of a fan for 2 days

section 352, "just watch and learn", hmm, perhaps a rehearsal of this video would have been appropriate🙃

Thanks for the tutorial. My Shark lost suction and the culprit was the dirt build up in the hose.

@VacMaster1991

2 жыл бұрын

Glad the video helped you

😂😂😂don't blame your water pressure from how dirty the filter is 😂😂😂 The shark Rotator vacuum NV500 Blows all vacuums out the ballpark I've had the most expensive vacuums and they were trash compared to the Shark I used one at a Baby shower and I was floored 😮 I had to have it I ordered it that evening 5 years old and still sucks up the entire house 😂 powerful and only $300 yes please

My tube was clogged and i took a hanger, put a barb on it and then cleaned the tube out and it worked great again

@VacMaster1991

3 жыл бұрын

Great glad you figured it out

OUT OF FRAME FOR THE PART I MOST NEEDED TO SEE 😡

@VacMaster1991

Жыл бұрын

Sadly I can't see my camera screen since it only points backwards

Question: Have you ever seen a dirtier HEPA filter than this one?

@VacMaster1991

2 жыл бұрын

Yes. Here is the worst I have ever seen. kzread.info/dash/bejne/n31l1rNuYdvVhNI.html

I have a corded PowerFin Shark Vacuum. I have cleaned everything, don't have any blockage. My Hardwood Floor setting stopped working and the other two settings the suction has decreased. Any idea? It's only like a year old and used at home only.

@VacMaster1991

Жыл бұрын

If it has duo clean then try cleaning the soft roller

Ok but HOW did you get the grey ring off the handle?

@VacMaster1991

3 жыл бұрын

Raw force

Great vacuum. This particular model is the only one I like. Every other Shark model Ive tried doesnt even compare, which I thought was odd. Its kind of a trip how you really dont lose suction when the tank gets full. Only one thing I dont like is that the white plastic has yellowed with age.

@20ilovemusik

2 жыл бұрын

I thought it was me, yes the is the only model that I love and is lighter then the other ones.

@cindybakley7130

2 жыл бұрын

I should have bought this one instead of stupid duo clean.

Can HEPA filters be washed? I've heard both yes & no.

@VacMaster1991

Жыл бұрын

Yes. they are washable.

HOW? WHEN I CLEANED MY HEPA FILTER IT REALLY DIDNT END WELL. IT TOOKS FOREVER TO TRY AND HAS LIKE BURN MARKS ON IT.

@VacMaster1991

3 жыл бұрын

If it has burn marks om it. Your motor may be failed!

@theweirdworldofhunter1699

3 жыл бұрын

@@VacMaster1991 No. Its actually because my dumbass put it out in the sun for it to dry

@elizaalice3379

2 жыл бұрын

@@VacMaster1991 bbhbbb

Hey I have a shark vac. But I have no suction at all. I clean everything, the roller work but no suction. Help!!

@VacMaster1991

2 жыл бұрын

Check the hose for clogs

The part I need to see is off screen … why???

@VacMaster1991

Жыл бұрын

Because my phones front camera was awful so I used rear main one. But I can't see the screen then. So I have no idea what is in shot.

I have a shark rotator nv60 model and there’s suddenly no suction! My filters are clean. There’s no obstructions. I’ve cleaned the hoses and it now won’t turn on standing up right or pick up anything from the carpet. I’m at a loss on what to do now short of getting a new vacuum.

@VacMaster1991

3 жыл бұрын

How old is it? The motor may have died.

@jillswanson712

3 жыл бұрын

@@VacMaster1991 3 years old

@VacMaster1991

3 жыл бұрын

@@jillswanson712 hmm contact shark about it

@jillswanson712

3 жыл бұрын

@@VacMaster1991 I tried that and couldn’t understand what they were saying lol HUGE language barrier! I’ve contacted a repairman. Thanks for your help and responses 😀

@VacMaster1991

3 жыл бұрын

@@jillswanson712 your welcome

My filters have all been replaced and no blockages anywhere yet my machine nv800ukt smells of dust when I use it... What can I do?

@VacMaster1991

2 жыл бұрын

Wash out the dirt bin.

@sanjayp2683

2 жыл бұрын

@@VacMaster1991 I replaced the bin and the issue still persists

@VacMaster1991

2 жыл бұрын

@@sanjayp2683 vacuums just kinda smell after a while. If it doesn't affect performance I wouldn't worry to much.

Nice vid but l sure wish you'd kept the camera on the handle/hose disassembly. Thx.

@VacMaster1991

3 жыл бұрын

Yea, I was frustrated with the crappy design of the handle, making it impossible to repair. I did it though.

@andreweppink4498

3 жыл бұрын

@@VacMaster1991- Yeah. I got so frustrated l called a vacuum repairman. He said there's no easy way. I never got it apart. I would've broken it. I went back to old way. Flush it out with garden hose & let it dry thoroughly. Repairman said he something drops are large ball bearing ball thru sometimes.

@VacMaster1991

3 жыл бұрын

@@andreweppink4498 , a Broom handle will work too

@andreweppink4498

3 жыл бұрын

@@VacMaster1991- Don't see how. Pluggage (At least in our case) is always in the handle elbow.

@VacMaster1991

3 жыл бұрын

@@andreweppink4498 it's not plugged. I was removing the handle from the hose so I could cut off a ripped spot on the hose. Then I could attach the handle back once the ripped part is removed

I have a shark rotator professional lift away and it’s getting old

@VacMaster1991

3 жыл бұрын

Replace it with a Dyson

@ZaxbyYouxef

3 жыл бұрын

@@VacMaster1991 which dyson do u think is the best for a cheap price?

@ZaxbyYouxef

3 жыл бұрын

And r shark vacuum cleaners hood vacuum cleaners?

@ZaxbyYouxef

3 жыл бұрын

And which dyson is the best model and cheap price but a corded one

I cleaned out my filters and mine still doesn’t t work.

@VacMaster1991

2 жыл бұрын

As in doesn't turn on at all. Or no suction

@Nicole-ng6ed

2 жыл бұрын

@@VacMaster1991 it doesn’t suction.

@VacMaster1991

2 жыл бұрын

Check the hoses for clogs

I cant see sh**t🧐🧐👁..esp when you was repairing hose.. why a ground wire???

@VacMaster1991

Жыл бұрын

I have no idea why there is a ground wire.

He never finished the video lol

@VacMaster1991

2 жыл бұрын

Accidentally deleted the footage! 😅

The one thing I see that you need to do is move the camera so we can see all that you are doing. You are telling us, buy pictures would be better for some of us. Thank you

@VacMaster1991

3 жыл бұрын

Now I have a better camera stand.