Thank you!! This worked for me. Just replaced the pump only, which I was able to do without taking the housing out of the washer. Took the 3 screws off holding the housing down and was able to take the pump off from inside the washer. For anyone about to do this, the housing screw heads are 10mm on a metric socket. Just ran the first wash and its good! You saved me basically the cost of a new washer.

Just finished replacing the drain pump on my LGWM3370HWA. I was glad to find your video dealing with the exact same model as mine. Your video was extremely helpful and made replacing the pump manageable as I thought I might have to call for repairs. Your tip on not removing the back drain pipe made reinstalling the pump unit easy and fast. Also, your recommendation to use a spring expansion tool made it a breeze to reinstall the drum boot. I recommend that if you are not experienced like I am, to take pictures and label screws/parts during disassembly so you will know where each item goes when reassembling. Took me about and hour-and-a-half to remove the old pump and less than 1/2 hour to install the new pump and put everything together.

@DIYRepairsNow

Жыл бұрын

I am glad my video was able to help you. Thanks for watching my video.💯💯👍🏻👍🏻

Thank you for the video, I just changed it, you made it so easy to understand, I changed it less than 2 hours.👍👍

Happy to find this video. My pump just quit on the same model and now I feel confident I can fix it myself. Thank you.

@DIYRepairsNow

Жыл бұрын

You’re welcome thanks for watching my video💯💯👍🏻👍🏻

Thanks for the video. I have the same issue with the exact washer model and just order a new pump. After watching your video I'm sure I can do it myself.

Well done!! Very thorough, very professional. Helped a lot from beginning to end.

Great video - thank you!! This was very helpful for me in fixing my LG washer

ATTENTION: I had to replace the pump in my lg washer machine today and i found a way faster and easier way to replace the pump! Take the coin catch cover off then unscrew the screws that above the coin catch then tilt the washer so the right side is in the air and there is a big opening under the washer then locate the pump under the pump there is a slide that clips in the bump houseing push the tab so u can slide it out then take the two hoses off and the pump comes right out! This only took me 10 min from start to finish

@PNW_MX222

Ай бұрын

This basically worked for me. Went through bottom, removed pump from bracket, had to loosen the easiest 2 bracket bolts to allow full access to front side screws holding pump to bracket. Leave the front bracket bolt in place or instal it again then attach pump to the plate, or it’s a huge pain to attach around the pump

Thanks for this video. Super helpful. I just replaced the Drain Pump Motor on my 2011 LG WM3360HVCA.

Thank you so much for posting this! Replacing the spring at the end had me thinking bad thoughts until I used your tip.

@DIYRepairsNow

3 ай бұрын

Excellent! Glad My Video Helped You Watch Your Washer! Thanks for Watching!

Perfect thanks a bunch? We have a vise grips needle nose it slayed that spring thanks to your tip!

Great video! Fixed my problem!

@DIYRepairsNow

3 күн бұрын

Great to hear! 👍🏻

Thank you, Sir !! couldn't have done without this video

@DIYRepairsNow

Ай бұрын

You are welcome! I am Glad My Video Was Useful! Thanks for Watching!

Thank you for posting this very helpful video. I just subscribed.

@DIYRepairsNow

Жыл бұрын

You’re welcome thanks for watching my video👍🏻👍🏻💯💯

TY! Great Video!

Thanks, it works!

I’m in the middle of this exact repair on this same machine. Thank you for the detailed video! Side note: @7:58 “13 32 millimeter” isn’t a size. If that’s how your socket is labeled… I got no idea. For everyone else, a 10mm socket fits just fine.

@maurotolari9215

6 ай бұрын

13/ 32 is an imperial size. It is slightly larger than 10 mm .

Very helpful video. Hint, after I followed the instructions, I realized the new pump had a broken fan. - Next time I’ll look before taking the entire washer machine apart.

@DIYRepairsNow

Ай бұрын

Yes, That Unfortunately Has Happened to me Before. Hopefully You get a New One Without a Broken Fan! Thanks for Watching!

Thanks

Is there a way to do this repair with a dryer mounted on top in a tight situation where removing the dryer is going to be a complication in itself?

Thank you! I only had to replace the pump as well.

@DIYRepairsNow

4 ай бұрын

You're welcome! Glad My Video Was Helpful!

I am doing a replacement pump on my sisters lg it’s a double pump! But it’s actually cheaper to put a whole new pump and housing in. As it’s nearly 20 quid each for the pump motors that have unfortunately both gone wasn't circulating water from the jet was blocked but unblocked it and it just stopped working. And the drain pump side was making grinding weird noises and then just died wouldn’t drain any water or do anything surprising no error code came up ? So think the pump has had it wasn’t blocked. Would I be right ? It’s a wm12331fdk lg.

Thanks!

@DIYRepairsNow

7 ай бұрын

Thank you so much👍🏻💯💯

Wish my dryer wasn’t on top my washer or I would fix it

Thanks for the video help a lot

I’ve seen videos, where they replaced the pump or motor from the bottom. Does it apply to this model?

@DIYRepairsNow

Жыл бұрын

If it’s open at the bottom you can try to do it that way sometimes is your choice I have done it both ways sometimes removing all the screws to take it all apart is difficult because they get rusted and they don’t wanna come out that’s when I choose to do it from underneath if it’s open on the bottom 👍🏻👍🏻

@rafaelretiz6267

Жыл бұрын

@@DIYRepairsNow Awesome as always, thank you for your wisdom and knowledge Nestor.

Good to know 😌 I'm going to let the warranty handle it or my friendly neighborhood plumber. I like diy though this is scary 😨

The boot spring is giving a hard time every time I have to install it, any tips how to make it easier??

@DIYRepairsNow

Жыл бұрын

Yes they sell a tool I have it but sometimes I don’t wanna go to the truck😁 and look for it mine is a different then this one but this is the one I find on Amazon this one will work to soon I will make a video about it here’s the link for the one they got on Amazon amzn.to/3ywQ6gv

Why does water not come out of the little hose which result in not spinning

I replaced mine about 6 months ago and it appear to be not draining AGAIN. I have checked all of the filters as well.

@DIYRepairsNow

Жыл бұрын

Did you install the OEM? Part?

@seansalak9516

Жыл бұрын

@@DIYRepairsNow yes according to the where I ordered it from. I will double check. Besides that any other reasons why water would remain in the tub? And thanks for the video! It was helpful!

@laliuxh14

Жыл бұрын

​@@DIYRepairsNowwhat is OEM?

@DIYRepairsNow

Жыл бұрын

@@laliuxh14 OEM Original equipment manufacturing that means the part is made by the manufacturing not by third-party

Was the code FE

10mm socket

How much did this cost?

@DIYRepairsNow

Жыл бұрын

It depends if you use an aftermarket or an OEM pump, but it runs between $185 and $300

@bryankeithguillory1355

Жыл бұрын

$29.90 with free shipping from Amazon. Received next day. Follow link above.

@lamrajmuhumed2397

Жыл бұрын

TCL

I did this and it still wont rinse and spin

@justindewoody

8 ай бұрын

Same here! How did you fix yours?

I replaced the drain pump and washer still not draining, what could I have done wrong?

@DIYRepairsNow

Жыл бұрын

You have to check to see if you get in voltage to the pump if you get a voltage to the pump in the pump is running but it’s not getting the water out you have to check the check valve I am going to send you a couple links in those videos. You will see what is a Check valve

@DIYRepairsNow

Жыл бұрын

kzread.info/dash/bejne/f5yol7WdgK-odqg.html

@DIYRepairsNow

Жыл бұрын

In the video, I say flapper, but his check valva

@DIYRepairsNow

Жыл бұрын

kzread.info/dash/bejne/fpZ1sNyNqq-pe5c.html

@laliuxh14

Жыл бұрын

@@DIYRepairsNow thank you so much, I will check it out

13/32 is SAE not mm. A little long winded.

13/32 mm 😆

@fredbecker607

7 ай бұрын

Whole new socket measurement system.

OMG. Trying to watch but getting dizzy from the camera work.

Bad camera one

@DIYRepairsNow

11 ай бұрын

Thanks for your comment and thanks for your support👍🏻👍🏻

Thanks

Thanks!

@DIYRepairsNow

3 ай бұрын

Welcome! Thanks For the Support, It is Very Much Appreciated!

Thanks