Thanks for watching! Feel free to follow my new channel showing general computer use videos and tech tips! www.youtube.com/@JamTechTips Also, check out all the great games and ways to save at www.humblebundle.com/?partner=pcmonkey To Donate, feel free to leave a Super Thanks by clicking on the Heart Button under the video.

@wandawTube

2 ай бұрын

04/24/2024: Hello, I can't find a way to send you a private message. I would like your advice on bending back the corner of my keyboard. The lower left key, CTR, felll out. This keyboard I ordered, slightly used, to replace my broken keyboard. Can I send you a photo of the bent corner? Please advise.

Man , thank you , I thought that I completely broke the "A" key on my keyboard , but here I found you ! thank you very much !

@PC_Monkey

8 ай бұрын

Glad your all set :) Always here if needed !!

@AchintyaTheEliteGamer

Ай бұрын

i cnt seem to fix it

Jamin, you have a fix for everything computer related. So, why should anyone even bother to take their computer to the repair shop when they can simply watch your channel. I cannot thank you enough for sharing this. 🙂

@PC_Monkey

Жыл бұрын

Thats what I think LOL Thx Rhonda :)

@hehehheheeheheheheheheh

4 ай бұрын

than you so much.i had a ant crawl into my keyboard while i was writing an assignment and i thought i broke my key-turns out that clippy thing js broke and u saved me with this tut loll@@PC_Monkey

Thank you for posting this helpful video, I was able to put my keys back on my laptop. They were taken out due to water falling onto the keyboard.

@PC_Monkey

7 ай бұрын

Glad your all set :) Always here if needed !!

Excellent Instructional video. Thank you.

@PC_Monkey

3 ай бұрын

Thanks !! Glad this video was helpful :):) Also, feel free to follow my other channel that I'm starting that will offer computer operation tips and general tech tips !! www.youtube.com/@JamTechTips

Try making the keys transparent so it is easier to see what is going on underneath them

Thanks a lot I fixed my sticky ThinkPad T14 keycap and cleaned it that way!

@PC_Monkey

5 ай бұрын

Great to hear !! Always here to help :):)

thank you so much this worked out!!!!! i had thought id broken mine for sure

@PC_Monkey

4 ай бұрын

Glad your all set :) Always here if needed !!

Jamin, I really appreciate your doing so many laptop model-specific tutorials. >> Now, as you directed, I'm going to ask you a question here about my present difficulty. I have a Lenovo ThinkPad T470s, but I suspect that my problem probably will apply to many different laptop makes and models. I've gone through the various steps you've enumerated for a problem with one or more keys, that seem to function mechanically, but don't produce a keystroke on the screen. I have 4 keys that are not working --- the J, K, L, and the colon key. These are all in a row, and for good reason. I recently spilled milk there on the keyboard, and since then, these 4 keys have been non-functioning. Actually, they function mechanically just fine, but they don't generate text. I've popped the plastic square parts off these letter keys, as well as off of other letter keys that work fine. For the bad keys there doesn't appear to be anything to clean or remove, and the retainer clips move just as well for the bad keys as for the good ones. I've stopped just short of reseating the keyboard and/or replacing it, because I'm pretty sure I'm going to have to replace the whole keyboard, and it will be several days before I can get a new one in --- and I need to use it 'till then. So HERE, is probably the "bottom-line" of it. When I press the little rubber nob underneath the dead keys, I don't get any text on the screen. >> I REALLY want to understand exactly what the milk did specificaly did to these 4 keys. When my new keyboard comes in, I'm panning to take a pair of needle-nose pliers to the old keyboard and pull up the little rubber nobs to try and find the mechanism or circuit that has failed. Of course, I'm hoping that YOU don't need an keyboard autopsy to know why my unfortunate keys, gave up the ghost? >> Thanks again for the depth and breadth of your very helpful videos!

@PC_Monkey

Жыл бұрын

The liquid could have damaged the sensor under the keys. Or if the liquid got under the keys and into the keyboard, the keyboard itself could now be bad. Yes, I would replace the keyboard. I cant tell you exactly what the milk did without examining the keyboard unfortunately.

thanks bro for this video... 🎉 you saved my day

@PC_Monkey

5 ай бұрын

Happy to help :) Always here if needed !!

​ @PC_Monkey could you possible show us to put the retainer clips back together

great presentation...I'll be following.

@PC_Monkey

2 ай бұрын

Thanks !! Glad this video was helpful :):)

I have a thinkpad p50 with some worn keys and other keys improperly installed with bent or broken minute plastic "detents" that grab on the the hinge mechanism. So I want to purchase a spare keyboard to cannibalize it for keys. The hinge on my keyboard are made or white plastic. Are the keyboards shared in its inner construction between many models of thinkpads/lonovo's ? There are some inexpensive options out there and I want to make sure that it would be compatible. Visibly the images of keyboards of E531 L540 W540 W550 W541 T540 T540P E540 P50S T560 etc look very similar to the one I have on the p50.

There are some keys wich the hinges are very fragile, i broke them by mistake since i did not know they where different. Forex the predator triton 500 has keys that is totaly different from the rest of the hinge design. [Insert] [DELETE] [PRT SCR SYS RQ] i broke all my hinges when i tried to take them off for a full cleaning. How do you take them off safely? I used the same thecnic as shown in the video.

A very big thank you....🙏🏿❤️💯

@PC_Monkey

Ай бұрын

Your welcome !! Happy to help :)

Hi 🙋‍♀️ thx for your videos ❤️ my ideapad 3 pin is not working and when i try use my microsoft password to change the pin)the keyboard stops responding ? I don’t know what to do ? Any ideas 🙏

Brilliant video. My G key was sticking on my ThinkPad so I followed this video. I was sweating doing that delicate job, all good now though.

@PC_Monkey

Жыл бұрын

Great to hear !! Always here to help :):)

@Pro_Skillz

11 ай бұрын

@@PC_Monkey No probs, but I found it easier to remove that hinge thing from the top. I saw what you meant about it being delicate though. It was probably a bit different on my keyboard as it was the G key close to the red button on mine

thank you so much

@PC_Monkey

4 ай бұрын

Your welcome !! Happy to help :)

Excellent!

@PC_Monkey

3 ай бұрын

Thanks !! Glad this video was helpful :):)

Subscribed!!

@PC_Monkey

7 ай бұрын

Thanks !! Glad this video was helpful :):)

Hey, this works great for most of the keys on my laptop, but the f1 and f4 keys don't come off easily, and looking under them as best I can, there's a little extra metal bit. I'm nervous I'll break it, do you know anything about them? On a T450s thinkpad, btw

@PC_Monkey

7 ай бұрын

Since they are usually smaller than regular keys, I would be surprised for there to be extra metal bars in there. They should look very similar to the normal keys :( Are they metal bars that go the length of the key as seen here in the larger keys? kzread.info/dash/bejne/d5eAm9eIZKiak7w.html

Hi Jamin, I have a question. My retainer clip comes apart and unfortunately, it cannot be put back together like what you explained because the pins in the inner clip got a little broken. My question is, is it safe to glue them together? Because now my 'G' key is really loose and it bothers me so much. I would really appreciate it if you can help me. Btw, my laptop is lenovo ideapad flex 5. Thank you so much for your video! ;)

@PC_Monkey

9 ай бұрын

No, I would not recommend glue. The Hinge Clip as well as the Rubber Spring and the Key Cap itself all need to freely move in order to work properly. Glue anywhere could stop one or all from moving the way they should. I would replace vs use glue.

@devsajeev1620

5 ай бұрын

@@PC_Monkeydo you know anywhere where you can get key caps for cheap? I checked Lenovos website and the only available thing is a $100 full keyboard replacement

Hello I did what you showed on the video but when I put the key back it does fit flat it's a bit tilted and when pressing down it does not function.. The clip is not springing it was flat down when I took the letter key off. Please advise what else I could do. Thank you so much for your great tips

@PC_Monkey

Жыл бұрын

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

@user-ng2zd7ng3w

Жыл бұрын

@@PC_Monkey hello thank you for getting back to me. I will try if that fail do you think I will have to the reseat remove the back of the notebook. Thanks again

@PC_Monkey

Жыл бұрын

@@user-ng2zd7ng3w Good luck !! Let me know how it goes :)

hii ive been trying to look for videos to fix my problem but i cant find any 😭. my problem is that i cant long press my 'w' key for too long and its a pretty important key for me because...well i play games lol. i can use w while texting but when im gaming it hasnt been working smoothly...it keeps stopping and its affecting my gaming experience

Hello! My retainer clip broke, as in the little circular thingy that connected those two hinges. It works fine, but when I press the key, it dislocates. So it doesn't stick together. It happened on the Altgr key. My question is, could I possibly replace the retainer clip from the Cltr key that is next to it? Would it stop functioning completely? 😅 I'm a little paranoid.

@PC_Monkey

7 ай бұрын

Yes, it should be the same size as a normal letter sized key

Hi Jamin. I have followed your instructions to remove a key. Thank you. I have several keys that stick on my Lenovo Yoga 920-13IKB. I think they are L345. I might get two 6's or even four. Same for 7 and U. With the cover and the plastic pieces off I cleaned with alcohol on a q-tip. Just pressing on the spring piece after cleaning and there is no difference so just putting it back together seems pointless. Any Ideas. I really don't want it taken apart for a new keyboard.

@PC_Monkey

Жыл бұрын

Most likely if the keys are sticking, they need to be cleaned. Most likely also, the two part Hinge Clip is what needs to be cleaned very thoroughly. If they are still sticking, they may just need to be cleaned more. Hard to tell without seeing them. However, it also could be that the key assembly is clean and there is just damaged to the clip or the Rubber Spring. But that seems unlikely if multiple keys are acting the same.

@thepatv100

Жыл бұрын

@@PC_Monkey Thanks for the reply. I don't think it is the hinge clip because it does it with the hinge clip off. It is five or six keys acting up. Sometimes they don't seem to work at all and others they type multiple times. Sometimes the Y and U don't work with the shift key and I have to put the cap lock on. It's very strange.

@PC_Monkey

Жыл бұрын

@@thepatv100 Sorry :( If its multiple keys sticking, I would assume a liquid spill of some sort. Replacing the keyboard may be your best bet

@thepatv100

Жыл бұрын

@@PC_Monkey OK. Thanks for the replies.

@PC_Monkey

Жыл бұрын

@@thepatv100 Good luck !!

thankyou brother

@PC_Monkey

Ай бұрын

Your welcome !! Happy to help :)

What is my retainer clip was damaged is there any way I can replace it or not? I have lenovo Legion 5 laptop, btw

@PC_Monkey

Жыл бұрын

If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.

the retainer clip came out attached to the key, can I easily put that key back on because I'm scared to try to remove the clip in case I break it?

@PC_Monkey

11 ай бұрын

Because they key can usually not be reinstalled with the Retainer Clip and the Key Cap still attached to each other, you would have to separate them as seen here, using a small flat pry tool.

my main problem was the button is not pressing at all. so what i did was i popped the key out then i placed a small portion of paper folded in two, it worked, please tell me if what i did was wrong, also its like 1 inch size now so idunno if itll break the screen when i close it

@PC_Monkey

8 ай бұрын

If the key is popping up 1 inch, its not installed correctly. I would recommend installing correctly. If thats not possible due to a damaged component, it would then need to be replaced.

hey had a question, so I recently noticed my W key is like, when I click on the corners of it it gets out, and I don't know how to fix it so when I'm pressing the W key from the top right or left it gets out and the same is happening with S is there anyway to fix this?

@PC_Monkey

4 ай бұрын

I would disassemble the key assembly as seen here and inspect for damage. If none is found, I would reassemble and assume something was loose. If damage is found, I would replace the key assembly.

Hello. I stumble to your video because I was looking for a way to make sure if it's possible doing this on space button and clean it? My space button is stuck after I accidentally spill my coffee on it. The machine is work fine after I let it dry overnight, but the space and alt button feels stuck after being pressed (the stuck feels like something sticky is preventing it to bounce back to normal). I hope you can give me an answer. Thank you and have a good day!

@PC_Monkey

7 ай бұрын

Yes, I would remove the space key and clean under it.

Hi I have tried doing your instructions. But the part where I press my CTRL keycap back in does not work. Nothing seems broken.

@PC_Monkey

3 ай бұрын

If nothing is broken then the key cap should snap on correctly. If not, something could be installed incorrectly. Perhaps the hinge clip is orientated wrong. I would remove another key cap and compare its hinge clip is installed to yours to make sure its installed correct.

Really help on my hp pavilion 15 , thanks

@PC_Monkey

10 ай бұрын

Great to hear !! Always here to help :):)

Thanks man! I thought I killed my CTRL key.. 😌

@PC_Monkey

18 күн бұрын

Glad your all set :) Always here if needed !!

@adnanzr6474

16 күн бұрын

@@PC_Monkey :)

I have a Lenovo Yoga 6 and the key cap along with the attached retainer clip came out (for the "dash" key. I have tried to gently pop it back in, at different angles but it won't engage fully. It doesn't stay. I also tried this: separating the retainer clip and then putting it it first, as you did... with the key cap popped on separately but it just comes off again... with that retainer clip inside the cap again. The fail seems to be the retainer clip not staying attached. Any advice? Thanks for your videos.

@PC_Monkey

11 ай бұрын

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

@CitizenTurtleIsland

11 ай бұрын

OK. I think that the retainer clip is compromised. With great difficulty, because it's so tiny, I think I see a break in the top right where I guess this plastic retainer clip would hook on to the tiny metal piece there. It's very difficult to feel and/or see that all those hooks (4?) are being engaged or not. But I tried taking off the next key (intact) and it seems to line up and "pop" back in. So I am assuming it is down to that break. I guess I am screwed then. I don't think I can buy just a little retainer clip for a Yoga 6 keyboard. Thanks.

@PC_Monkey

11 ай бұрын

@@CitizenTurtleIsland I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.

@CitizenTurtleIsland

11 ай бұрын

Thanks! I will try to get one shipped.

@PC_Monkey

11 ай бұрын

@@CitizenTurtleIsland Good luck !! Let me know how it goes :)

my h key has ben broken for monts, so i tried to open it and clean it but now the bottom wont snap back in and when i press the key to far up it falls out almost. help would be great

@PC_Monkey

3 ай бұрын

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

Hi Jamin, I accidently broke the plastic pins which get in the metal hooks and know the bottom part of the key is not going in there. So what can i do know, please help me. btw the key is "1" Also key is not working by pressing the rubber ....Thank You.... : )

@PC_Monkey

5 ай бұрын

If any component of the key assembly is broken or lost, it would have to be replaced. I usually get my keys on Ebay or www.replacementlaptopkeys.com. If you cannot find a loose key for sale, you may have to purchase a keyboard and take a key from there.

Great vid. My problem is the letter [K] is suddenly "held down' even after removing the cap and butter fly clip have been removed, amy suggestions? 😅

@PC_Monkey

6 ай бұрын

I would uninstall the key as seen here and inspect for damage or for the need to clean it. If no damage is found and after cleaning it if necessary, I would reinstall the key as seen here. If damage is found, I would replace the key.

@MrPaulHobby

5 ай бұрын

@@PC_Monkey I've tried everything and still no success. I'm thinking I'll need to do a full keyboard replacement

@PC_Monkey

5 ай бұрын

@@MrPaulHobby Good luck! Let me know if you would like help locating a compatible keyboard

Hi! I have an acer aspire laptop, I'm having issues charging it. When I plug it I it does not charge, the battery lights do not come on neither. It also has no battery, what should I do?

@PC_Monkey

Жыл бұрын

If the computer has no battery to charge, that may be why no charging lights come on :) For a computer that does not turn on, try this video first; kzread.info/dash/bejne/enyr3KNsZ9WalZs.html. Let me know how that goes :)

@henrylangley3983

Жыл бұрын

@@PC_Monkey I have tried this, I believe it is a faulty power adapter. I don't know the exact model however Its a black acer aspire laptop - Could you help me with finding the right charger/Adapter?

@PC_Monkey

Жыл бұрын

@@henrylangley3983 I would need the full model number if possible. Or, do you have the old adapter? Is it the original? Is there a brand and model number on that?

I got a problem that when i want to unlock the button i can't because a piece of my key is blocked there! How i can make that piece to be back not blocked??

@PC_Monkey

4 ай бұрын

There is a broken piece of key stuck in your key assembly? I woud remove the key cap and try to get it out of its stopping your key from working properly

Everybody does the small keys, show the space bar

@PC_Monkey

5 ай бұрын

You can try searching for 'large' or 'space' if you wish to see a larger key. That may get better results. You can see an example of a larger key here: kzread.info/dash/bejne/d5eAm9eIZKiak7w.html

What happens if you didn't know NOT to pull up the little rubber thing? What do I glue it back down with?😢

@PC_Monkey

6 ай бұрын

There isn't really a good way to reattach those. They are not meant to be replaced. Best advice is try to use a small amount of glue. If that does not work, you may have to replace the keyboard. I would try any kind of craft glue or plastic glue I guess.

need to fix arrow can u take out arrow and put back?

@PC_Monkey

5 ай бұрын

Since the arrow keys on most keyboards are very similar in size to letter keys, it would be pretty much the same way as seen here.

My retainer clip keeps sticking to my key but the key wont stay in it's place on the keyboard, what am I doing wrong?

@PC_Monkey

7 ай бұрын

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

Thanks for the video (it's surprisingly difficult to find one where someone actually takes apart the hinge). So, my 'e' key on a T490s 20NY now works sporadically--it's fine for awhile, then stops responding, then goes back to working fine again. Weirdly, it seems to fix itself if I quickly roll over 'wer'. It feels a little off, and if I try pressing the rubber nub with the keycap removed, I get the same result. Any idea what might be going on there? (obviously I'm hoping to avoid replacing the whole keyboard/palmrest, due to the risk + cost).

@PC_Monkey

7 ай бұрын

If the keys working feels a little off, I would disassemble the key assembly as seen here in the first part of the video and inspect for damage or the need for cleaning. Then I would reassemble and see if the key feels more smooth

@johnrobertson1

7 ай бұрын

@@PC_Monkey yeah, I started there and nothing felt/looked obviously wrong. It gets weirder, as it’s now spread to the 3 key…but only when the laptop heats up under load. Not a fantastic sign…

@PC_Monkey

7 ай бұрын

@@johnrobertson1 Just so you know, over heating situations can be hard to troubleshoot just one issue as multiple different components and boards including the motherboard itself, could all be faulty. An overheating computer can be damaging multiple different components if not resolved. First, make sure that the fan and vents are clean and clear. If you need help accessing the fan, let me know what brand and model computer you have and I can help you get inside it. If that does not fix the overheating issue, then try replacing the thermal paste on the CPU and if needed, the GPU as seen here; kzread.info/dash/bejne/fZOelqmJmtPHp84.html. If that fails too, replace the CPU

Hi. My laptop goes off immediately i take the charger out from it and when i plug back the charger it turns on with a dim screen and after using a flashlight to see the screen to insert the passcode it goes completely black. What could the problem be.

@PC_Monkey

Жыл бұрын

1. What brand computer do you have? 2. Also, did anything happen before this? Overheating, liquid spill, Windows update, etc?

@lindananaadwoaagyabeng1920

Жыл бұрын

@@PC_Monkey it’s an Hp laptop. And the screen started flickering when i try to dim the brightness. At first I could use it but has to be on a full brightness. And now the screen is black from turning it on, to putting in my passcode. I also did an update to windows 11.

@PC_Monkey

Жыл бұрын

@@lindananaadwoaagyabeng1920 1. For a computer that turns on but the display does not work, try this video first; kzread.info/dash/bejne/l22d25VpepOWXc4.html Let me know how that goes :) 2. If there are no signs of life and you dont think the computer is turning on, kzread.info/dash/bejne/enyr3KNsZ9WalZs.html. Let me know how that goes :)

Thanks' R 'is now working RRRRRRRRRRRRRRRRRRRRRRR

@PC_Monkey

7 ай бұрын

Great to hear !! Always here to help :):)

hey my laptops back arrow key in not going in can you help me please

@PC_Monkey

6 ай бұрын

How is it not going in? What is happening?

OK, but can you do an episode on the arrow keys?

@PC_Monkey

3 ай бұрын

The arrow keys are usually almost the same size as the letter keys. They would be the same construction as seen here, perhaps just a little smaller. Are yours different?

@michellelucero05

3 ай бұрын

yah@@PC_Monkey, they are rectangle shaped, and the little thing that holds the other white thing? yah, it doesn't look like any of the other ones in the letter keys.

@PC_Monkey

3 ай бұрын

@@michellelucero05 What brand and model computer do you have?

@michellelucero05

3 ай бұрын

idk@@PC_Monkey, all i know is that its silver, is a crome,it says something like hp or something, and ITS MISSING AN UP KEY

@michellelucero05

3 ай бұрын

and@@PC_Monkey, either it's Dominick or Michel on your screen, this is a different person, DJ, the son of Michel, or big brother of Dominick.

the thing 5:58 is attached to the key. can u tell me what to do?

@PC_Monkey

3 ай бұрын

Because the Key Cap and the Hinge Clip can usually not be installed while attached to each other, you will have to separate them before installing. You can do so as seen here in this video, by using a small flat pry tool.

@Aloush-kz

3 ай бұрын

@@PC_Monkey ok thank u:)

@PC_Monkey

3 ай бұрын

@@Aloush-kz Good luck !! Let me know how it goes :)

yay! Tysm I broke my laptop ☺

@PC_Monkey

3 ай бұрын

Glad your all set :) Always here if needed !!

@SpookyPixel_404

3 ай бұрын

@@PC_Monkey I broke my keyboard fr

@PC_Monkey

3 ай бұрын

@@SpookyPixel_404 Are you wanting help finding a replacement?

Problem is you claim Lennovo buy you are working on a Dell. The Lennovo is set up differently under the cap.

@PC_Monkey

Ай бұрын

Your saying all Lenovo keys are designed one way and all Dells are designed a different way? lol. No, thats not correct at all. There are dozens of different key assembly configurations and all major brands (Lenovo, Dell, HP, Asus, Acer, etc) use all of them throughout their various models. Thats why the idea here in this general Lenovo key repair video, is to show you how to fix a typical key assembly. Although only a few models will have this specific key assembly in Lenovo, the method explained will help you know how to fix all of them. And the same goes for other brands. They will too use this exact same assembly in a few models and different ones in the other models. So its just as useful to any other brand. So if this video doesnt help you figure out how to safely remove the key on your model Lenovo even if its not the exact same assembly, id say theres another problem.

can i use superglu if the key is not sticking still

@PC_Monkey

Ай бұрын

I dont recommend glue as the hinge clip and the rubber spring need to be able to move freely for the key assembly to function correctly. If a component of the key assembly is damaged, it should be replaced.

@desiguy995

Ай бұрын

@@PC_Monkey whre do i buy a single key ?

I have a problem she. I’m in the key and it’s taken out the black is punctured on the right

@PC_Monkey

4 ай бұрын

If your key is damaged, it would need to be replaced. Are you wanting help finding a replacement?

@SMSMEGA

4 ай бұрын

@@PC_Monkey I’m taking it in a shop tomorrow

@SMSMEGA

4 ай бұрын

@@PC_Monkey it’s the inside of the key

@PC_Monkey

4 ай бұрын

@@SMSMEGA Good luck !! Let me know how it goes :)

@SMSMEGA

3 ай бұрын

@@PC_Monkey I brought it in a week ago and they are gettting the parts in week so I’m not going to be able to use it for another week. Also I broke the A and the 9 key on the right side. Also the price was 106.49

My retainer clip broke down what do i do now?

@PC_Monkey

27 күн бұрын

If any part of the key assembly breaks, you would most likely need to replace it.

i used some cleaner and the lenovo keyboard key 6 is no longer working

@PC_Monkey

7 ай бұрын

It was working before the cleaner? Its possible the keyboard now has some liquid damage :( Can you try 'reseating' the keyboard ribbon cable from both ends if possible?

@dancar2537

7 ай бұрын

@@PC_Monkey thank you for your answer. i will try it when figuring out how to open it

@PC_Monkey

7 ай бұрын

@@dancar2537 Good luck !! Let me know how it goes :)

bro i clean my keyboard inside and the buttons are still not working

@PC_Monkey

4 ай бұрын

Were they working before you cleaned them? How many keys are not working? Do the key or keys feel like they are physically fine or do they feel like something is mechanically wrong with them?

@Iugyoh

4 ай бұрын

w,a,s,f and 2 key are not working @key

The key doesn't snap on for me XD I've been trying for 10 minutes

@PC_Monkey

Жыл бұрын

If your Key Cap is not clicking down in place correctly, it is most likely due to the Retainer Clip not being properly installed or damaged. Remove the Cap and inspect for damage or that its not laying down flush and properly snapped in itself. Compare to another Clip if needed by removing another Cap.

@HydrxUndertale

Жыл бұрын

@@PC_Monkey Thank you :D

@PC_Monkey

Жыл бұрын

@@HydrxUndertale Good luck !! Let me know how it goes :)

no help!

@PC_Monkey

Жыл бұрын

What are you trying to do? Installing a key is a pretty simple process. This video didnt show you how to do it?

You are not repairing anything, just pulling out the key doesn't mean it is fixed. This is a big lie.

@PC_Monkey

5 ай бұрын

lol wow. This is a tutorial on how to replace a broken key. If any component on a computer physically breaks, the fix would be to replace it lol. How would you fix a broken key? Love the IQ level of this comment lol

You did not show how to fix the key? just replacing the clips does nothing...

@PC_Monkey

Жыл бұрын

LOL this video is a tutorial on how to replace a key. This 'fixes' a key if the key is physically damaged. If you key is not physically damaged then your on the wrong video. To troubleshoot why a key is not entering the correct character when its not a physical issue, you would follow these steps instead: kzread.info/dash/bejne/qaWmxcqfoMewj9o.html