How to fix error code E840-0001 and error location solution is shown as Canon ir ADV 6275/6265/6255.
Ғылым және технология
6075/6065/6055.
Code E840-0001
Fixing Shutter Motor error
The Fixing Shutter HP Sensor (PS53) failed the detection at the Fixing Shutter operation.
Remedy:
1. Check the operation of the Fixing Shutter Gear (overload, etc.).
2. Check the operation of the
Fixing Shutter Motor (M15) at the initialization
operation of the Fixing Shutter.
3. Check the detection of the Fixing Shutter HP Sensor (PS53)
if the Sensor operates normally).
4. Check the drawer of the Fixing Assembly and the host
machine.
5. Replace the Fixing Upper Unit and the
Fixing Drawer Harness Unit.
6. Replace the Main Driver PCB (PCB2) (check the fuse (FU11).
Пікірлер: 42
Aapka Vedio Kaphi Helpful hai
thank u so much sir
Thanks a lot
Thank U Boss
Good job
thank you
Thanks boss
Have you resolved error 263-000 on this copier? I've already done all the steps in the service manual and the only solution left is to change the very expensive AC driver PCB or the Main driver PCB. I do not know what to do.
@TechHumayunkabir
3 жыл бұрын
You can try to clean the power, Copier>Function>Clear>pwd-clr>ok Copier>Function>Clear>card>ok Copier>Function>Clear>mmi>ok Copier>Function>Clear>mn-con>ok. Code: E263-000 Current Sensor error An error is detected in the value of the Current Sensor (SE601) (the value remains at the upper limit). 1. Check the connection between the AC Driver PCB and the Main Driver PCB (connector disconnection, open circuit, short circuit of harness). AC Driver side: J615, Main Driver side: J103 2. Replace the AC Driver PCB. 3. Replace the Main Driver PCB (PCB2).
@henri417g
3 жыл бұрын
@@TechHumayunkabir Thank you very much I will try
How to fix same error in image runner advance dx 617 i
How to resolve E00302-0101 and E00302-0103 error in canon IR adv 6500i series...
@TechHumayunkabir
3 жыл бұрын
Copier>Function>Clear>R-Con>ok
Canon irc 2225 toner ratio adjustment plz tel
@TechHumayunkabir
3 жыл бұрын
What is the main problem of the machine you want to adjust the toner ratio
@arslandanish7109
3 жыл бұрын
Light copy problem
@TechHumayunkabir
3 жыл бұрын
@@arslandanish7109 In this model it is a disease if the toner is not original, applying the original toner will solve the problem. If this problem occurs even after applying the original toner, then clean the developing about magnetic roller with kerosene, you will see a nice copy.
@alokkumar-sq9ie
3 жыл бұрын
Help me sir ji
Ir5050 erop 840-001 how to solve
@TechHumayunkabir
3 жыл бұрын
E840-0001 ★There is a shutter error. While the shutter is in operation, the sensor signal is not detected and, in addition, it is still not detected after 3 retries. ★There is a shutter error.The interval of ON-OFF detection by the sensor in response to shutter operation is shorter than a specific time period.
Not working last two week
@TechHumayunkabir
Жыл бұрын
,
paper scan by adf but no fall in tray
@TechHumayunkabir
4 ай бұрын
Enter the full details
Sir please show the error code e820-001
@TechHumayunkabir
Жыл бұрын
Developer Upper Cooling Fan error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Developer Upper Cooling Fan (FM31) is turned ON.
@TechHumayunkabir
Жыл бұрын
Developer Upper Cooling Fan error. The Fan stop signal is detected for 5 seconds or longer and retry is failed 4 times in a row although the Developer Upper Cooling Fan (FM31) is turned ON.
Cara memperbaiki Eror SP53 ???
@TechHumayunkabir
Жыл бұрын
please send display pictures whatsapp
@markoanthonioranolat6849
Жыл бұрын
@@TechHumayunkabir cant i gate number WhatsApp?
@TechHumayunkabir
Жыл бұрын
Whatsapp +8801312616163
@hamiddjarma9172
2 ай бұрын
Thanks so much bro ❤❤
Background noise is disturbing
@TechHumayunkabir
2 жыл бұрын
My thoughts are that toner is not good
Plz mob. Sand me
@TechHumayunkabir
Жыл бұрын
,
Sorry to say please make videos little faster.
@TechHumayunkabir
Жыл бұрын
.
@TechHumayunkabir
Жыл бұрын
@DaniFa ok