Wow so well explained!! I will try to fix mine when I get home. Thanks

Very good and thorough explanation . Good stuff , many thanks .

@RizeBikes

Жыл бұрын

Glad it was helpful!

Thank you very much for your help ☺️ God bless you brother

Seriously just saved me a ton of frustration. Thank you.

you have saved my life bruh. thanks. you'll go to heaven for this :) respect.

@RizeBikes

2 жыл бұрын

Hi Marek, glad we could help!

nice work and explanantion, do you have a list of all error codes?

Got it fixed, Thank you!

@RizeBikes

Жыл бұрын

Hello, Glad you were able to get yours resolved!

Thank you maan :D, lifesaver video

Thank you so much I would die without this video

@RizeBikes

Жыл бұрын

Hello, I am happy to hear the video helped to resolve your issue!

Thx that really helped me out 💪🏻

Hello. I did all the steps and the error 30 dissappear only If I unplug the motor and then it appears an error code 07 That means the motor is broken, right?

Thank you, it solved my problem

I hv lactro renew electric cycle of hero...in order to solve first dealer change the display but problem not solved then dealer changed whole controller still it was unresolved...then main cable has been changed then the problem resolved.....

Thanks you! just repeared my bike, broke cable between the display and controller.

@RizeBikes

2 жыл бұрын

Glad it helped!

Thx for this! Had 5 shorts due to wires being squished together under the lid in the controller box

@kevinkevin6414

2 ай бұрын

How did you fix the shorts?

@kevinkevin6414

2 ай бұрын

How did you identified them my wires fell out of the controller box and I think I shorted something when I forgot to turn the battery off while trying to put wires back in box

@kevinkevin6414

2 ай бұрын

It’s showing error 30 code

@christianblicher1358

2 ай бұрын

@@kevinkevin6414 i just took the box apart and visually inspected each wire for damage and scratches. Repaired with electrical tape since the wires themselves wasn’t broken but only damaged in their insulation

Excellent steps and troubleshooting guide. Thanks

@RizeBikes

11 ай бұрын

Glad you liked it!

I only bought a new bafang c961 bcoz the minus button worked.so cable should be fine but new display start up 3-4 sec it show err 30..no idea how to fix it.and just bought new batteri for a month ago.

Thank u so much. I fixed my bike

Would you have any idea what code 27 is my bike is a himiway excape pro thanks

@eddylai3593

Жыл бұрын

You could try checking your owners manual

Hello, I'm having ebike of Adore Palermo 116E and it has shengyi motor. While riding initially speedometer shows 0km/h and then speed increases it starts to show 28H and engine icon starts to blink. What is the problem I don't know. Please help.

Hi there, i have this problem. With just the key/display; and controller connected i get error 30. Does the fact I do not get error 24 prior to error 30 when the motor is disconnected mean anything ? Thanks and a great video !!!

@RizeBikes

Жыл бұрын

Hello Nenad, If you have error 30, it is either the LCD or controller. I would look into getting either or both replaced.

@nenadkojic7125

Жыл бұрын

@@RizeBikes Well in theory it could be the cable though just replaced that and no change. Display next...

hey, i recently bought a rize blade off a friend used. Cannot keep a charge, he says it was running perfectly fine when he was using it. Do you have any idea what could be wrong with it?

@RizeBikes

Жыл бұрын

Hello, Please get in touch with us at support@rizebikes.com and we'll have a service technician review your ticket!

My display turns off immediately, but i managed to see it display an error 30h. Still figuring out what's causing it.

@RizeBikes

2 жыл бұрын

Hi Bear Metro, if you need further assistance, please contact our team at support@rizebikes.com.

Can you give us a list of error codes and what they Coralate to. dtc .thanks to

@RizeBikes

2 жыл бұрын

Hi Irene, the list of error codes will be available in your owner's manual. In the event you no longer have your owner's manual, here is the link to a pdf version that is available on our website: rizebikes.com/pages/owners-manual. Should you have any questions, please feel free to email us at support@rizebikes.com.

@healcanjim4381

2 жыл бұрын

I have a rize blade, is it possible to order new controllers from you guys?

@thomasleclair7418

2 жыл бұрын

@@RizeBikes ,,,,thanks , this site helped me out alot,,,had a code 30 pop up after an install of an amazon replacement PCM /power/control/module.....

Can a code 30 come from a controller? How do I check my motor, I never seen a code 24- ????

@RizeBikes

2 жыл бұрын

Hi Fra Bar, here is an article on how to troubleshoot the issue: rizebikes.zendesk.com/hc/en-us/articles/4402062821399-Code-30h-Controller-Communication-Error.

I have a bafang mid drive when i turn it on im getting error 30h on the screen and shutdown right away

@RizeBikes

2 жыл бұрын

Check out this vid kzread.info/dash/bejne/oJuio9iuaKineMo.html and contact Rize support support@rizebikes.com

@beaualIoevv

Жыл бұрын

same, nothing worked, checked and unplugged all the cables. started riding without the battery lol

Всё наглядно! 👍 спасибо большое 🙏

@RizeBikes

Жыл бұрын

Great to hear!

! never comment - but now thanks a lot!! i fixed the problem - wrong pin connector YEsss

@RizeBikes

8 ай бұрын

Glad it helped!

I HOOKED UP BATTERY BACKWARDS CHECKED EVERYTHING DOWN TO CHANGEING THE SCREEN OR THE CONTROLLER THE PINS WERE FINE COULD CONTROLLER BEEN BURNT?

@RizeBikes

Жыл бұрын

Hello Dan, Please contact us at support@rizebikes.com for assistance.

hi sir have a good day, I have some issue with my scooter it shows 2 error codes the E-28 ans E-30 what does it means? please help, Thank you..😊

@RizeBikes

Жыл бұрын

Hello Deocem, Please get in touch with us at support@rizebikes.com and we can have a warranty associate assist you.

Long story short, i had a spare screen and went to switch it first to check that and noticed a bent pin in the screen connection, so dont pass over checking those pins as well everyone!

I get error 30 H EVERY time i finish riding and turn the bike off and back on again, after about 30 min it fixes itself, but the error will cycle again. I also cannot toggle the front headlight when error 30H is present.

@allsam18

Жыл бұрын

hi did you fixed it ?

@dallasgrful

Жыл бұрын

@@allsam18 no I’m hoping the new lcd screen I just got might fix it.

@ghybgvyfbfrthnbftghd

Жыл бұрын

@@dallasgrful did it

@user-qo1xc6xm9g

Жыл бұрын

​@@dallasgrful Здравствуйте, подскажите пожалуйста дисплей вам помог?

I have error 30 and replaced the display and the controler and still have errror 30??

@RizeBikes

Жыл бұрын

Hello, Please contact us at support@rizebikes.com and someone will get in touch with you on resolving your 30H issue.

❤❤❤❤

i have TDR 1500w 48v keeps coming up with error 2. Please help me anybody 🙏

it works it works aaaaaa :)

My display is flashing and put numbers in doing it. Nothing works. It won’t go to the menu.

@RizeBikes

Жыл бұрын

Hello Shaun, Please contact us at support@rizebikes.com and we'll be happy to assist.

What about error 95?

@RizeBikes

10 ай бұрын

Hello, Unfortunately our system does not have a error 95 so we will be unable to assist.

HOW DO I FIX ERROR 21h ON MY BLADE 2 PLEASE HELP!!! Theres nothing online about the issue im having 😭😭😭

@RizeBikes

6 ай бұрын

Hello, The issue of an error 21H on your Blade 2 could be a overvoltage protection error. It is recommended to maintenance your motor as your motor is requesting too much power from the controller, causing this issue. We have videos on our page detailing how to open the Bafang rear hub motor and is recommended to take a look before attempting the repair. It could be gunk inside the motor that's causing this additional power draw, and therefore, 21H error.

A have bafang and it's say error 08 what it's that

@RizeBikes

8 ай бұрын

Hello, Please get in touch with us at support@rizebikes.com if you require assistant with your Rize Bikes!

Pesky 30 on HeyBike Mars 1.0. New controller display wire harness…dreaded hub motor change out…ArrrG! Gonna trace it all in morning ashes on your video

I have a different bike from a different company but this helps thank you

Traducción. A Español

If its bafang it more than likely is a fault with a part on the speed controller. Unless you are a techniciam, i highly doubt you will be able to fix it. As all the components arw sealed in silicone

not good.