Had cracks that repeatedly came back after being filled in our eldest daughters room. Watched this video in 2019 & came back today to let you know I followed your method and that crack has not appeared todate. Thank you so much for this video.

@SyedWaqasSaghir

Жыл бұрын

Was that crack in large or smaller in size?

You treat the novice like an actually intelligent person who wants to know the trade. Muchhhh appreciated

@PaintingandDecorating

3 жыл бұрын

Thank you.. I believe anyone can learn a trade if shown correctly.. Nice to help others..

@oliverdking

3 жыл бұрын

@@PaintingandDecorating Thanks! Would you fix corners in the same way? Perhaps without the foam step?

Again a really clear informative tutorial that's given me the confidence to carry out my own cracks in my home. Cant wait to start. Thanks

Great technique. I've had a crack that keeps coming back. Gypsum plaster on block wall. Tried V & filler - cracked. Tried paper tape & filler - cracked. Tried shallow V and acrylic caulk - cracked again on a hot day. Routing away the plaster the wall is cracked behind. Summer/winter the building moves! Engineering wise, ANY plaster/filler hard up against the crack will transfer that movement to the surface and it WILL crack again. Its obvious when you think about it. Thats why foam is SO CLEVER for this specific type of crack. Its spongey. It decouples the movement, so a large movement in the substrate becomes a smaller movement at the surface. It gives room for the tension to spread out, lowering the stress and making the finished surface much more resistant to cracking. From an Engineering perspective I'm pretty sure thats why this magic technique works. Definately using this technique. The only tweak I'm going to make for extra peace of mind is to choose the most flexible filler I can find. Added this video to my favourites, I'll let you know how it goes.

Thank you. Your videos are good because of the attention to detail which doesn't presume previous knowledge.

Thank you for the easy to follow tips. It makes a lovely change to see someone helping others rather than trying to raise their online profile. Really appreciated.

@PaintingandDecorating

4 жыл бұрын

Thank you, not everyone can afford a decorator, but everyone deserves a nice home.

I agree with the previous post. Your demonstration is excellent. Thank you for uploading and sharing. Your knowledge is invaluable. :)

Appreciate showing tools needed at the beginning. When you opened the crack, I decided to let someone else handle the job. :)

@PaintingandDecorating

4 жыл бұрын

Thanks.

@skibbadabba

3 жыл бұрын

Thats what she said!!

@laccbible3730

3 жыл бұрын

Lol

@basketcase297

2 жыл бұрын

I always like someone else handling my crack

This is definitly a great tutorial. Repairs requires a lot of effort and care. Miss one step and you might get debonding or failure of your repair. Bravo to OP for this video.

Awesome. I had no idea what to do with several 12-15 inch slightly sagging ceiling cracks. You have made my day. Thank you kind man.

@jokotadeolukoga504

Жыл бұрын

I really got educated,well done,pro.

Mate I have been the game for 30 year and I have just learned something new with foam , well done and it’s nice to see a old school professional

@PaintingandDecorating

4 жыл бұрын

Thank you cheers mate..

You can see you take pride in doing a good job. Thanks for posting the video's

@PaintingandDecorating

5 жыл бұрын

Thanks.

jesus christ, you are ridiculously thorough on your repairs. Good as new, literally. This was a joy to watch.

@PaintingandDecorating

6 жыл бұрын

Stevey Irwin Thanks my work means a lot to me. Like to do the best I can.

@williamwwjd12345

6 жыл бұрын

Stevey Irwin his name is not Jesus Christ you know everytime you say Jesus Christ in a derogatory way you are storing ref at the end of your life going to be charged for Every curse word you've ever said and yes saying Jesus Christ is a curse word if you're not praying

@nickevans7049

6 жыл бұрын

praise the lord william

@wbev_thai1666

5 жыл бұрын

The only thing that lets you down is , that you haven't got a mirka

@hananesoha3548

5 жыл бұрын

Jesus is a live he never die he is in heaven god did not allowed them to kill him do your research

Thank you so much for sharing your work. My house has issue totally the same to fix them.

Excellent video. It's just what I was looking for. I took wallpaper off my walks today ready to paint them and the cracks are quite bad, too deep to skim over. I am going to do everything that you have suggested. Thanks very much. Warm and best regards.

@PaintingandDecorating

4 жыл бұрын

Thank you...

great video. Came across expanded foam in the 80s when all the aspiring burglars used it to silence alarm boxes. Will definitely have a go with it to repair stubborn cracks that reappear days after you have filled them.

@PaintingandDecorating

5 жыл бұрын

Thanks.

Thank you, this is the best video and easy to follow.

i actually nodded off while watching this. loves a drop off pva this fella. loves his job by the look of it n all. fair play fella.

@PaintingandDecorating

3 жыл бұрын

Cheers.

I found this to be very informative as I have a very old building and get cracks because of living on a busy road. Thank you for the posting.

@PaintingandDecorating

6 жыл бұрын

sonia clarke Thanks.

More or less taught myself how to do this while renovating my old house. It does feel good to see and watch someone who obviously knows what he is doing apply the same techniques I bumbled my way through.

@PaintingandDecorating

5 жыл бұрын

Thank you it does give satisfaction ...

@FiscalWoofer

4 жыл бұрын

Great job, thanks! Started using expansion foam now for filling similar and bigger gaps and never looked back.

I had a big crack right across ceiling and can’t believe how well it’s come out. Completely gone after painting over it. Thanks 👍

@PaintingandDecorating

Жыл бұрын

Thank you great stuff

Excellent video. Well done. I learned a lot from this video. Thank you very much.

@PaintingandDecorating

6 жыл бұрын

Thanks.

Thank you for your skills, I need to do my kitchen on a budget so got to do it with my partner, so saves us money, this is good, as I had no idea

I feel like I'm copying the comment before me but I too have exactly what's described in the video , skimmed wall and identical type cracks . I'm very impressed with the procedure and am going to follow it also . Thank you I've been racking my head how to put it right , now I know.

@PaintingandDecorating

4 жыл бұрын

Thanks.

Really good crack repair video. What looks to be a simple fix, when done properly the preparation looks horrendous but the end result is well worth the effort.

@PaintingandDecorating

4 жыл бұрын

Thank you.. yes sometimes best the customer does not see... they can worry without understanding the finish.

Outstanding....a true professional 👍

Great insight into a true tradesman . Brilliant video.

@PaintingandDecorating

4 жыл бұрын

Thank you.

Mate im a time served plasterer and i would use those techniques and have done in the past. Great video ...keep up the good work.

@PaintingandDecorating

5 жыл бұрын

Cheers mate.

@kenfoster6888

5 жыл бұрын

This painter is not a trades man he is an in prover he never checked above before pushing his screwdriver through ceiling

@-MrRichBiker1967

5 жыл бұрын

Why what's in the ceiling that he's afraid of?? a balloon that's going to pop? There's no wires is laying on top of the ceiling

@gary11able

4 жыл бұрын

All he needed to do was use a stud finder to find a stud to screw the plasterboard to, instead of poking holes in the ceiling.

@MikeHunt-ik3rg

4 жыл бұрын

headshot froma45 really ?this guy is a painter not a plasterer & no plasterer would fill a crack with expandable foam , obviously they would use plaster .

Thank you for your complete instructions. So very helpful, you are truly a perfectionist

@PaintingandDecorating

6 жыл бұрын

Thank you.

Thank you so much for the information you have given . So nice to find a genuine person that can help. Thank you.

Well done fella, I’ve been in the trade 56 years,,And your correct!,,your method is the only way to do the job

@PaintingandDecorating

6 жыл бұрын

Thank you.

In the US we have a product used for shower installs called Red Guard. It's a "paint on" rubber membrane used for waterproofing, but painters use it for cracks. Basically, just patch the crack, sand smooth and put 3 coats of red guard on. Than paint over the red guard. It allows the crack to move under the paint without tearing the paint. It's fast and permanent and works perfect.

@superiorcarpetpaintllc4351

4 жыл бұрын

I use Red Guard everywhere moisture or cracks are an issue, just used it on soffits where the masonite paneling was peeling and blistered, just scrapped the blisters off, puttied the area smooth and hit it with Red Guard (I brush it on wait a minute and smooth with a wet 4" knife). We also use it around windows and doors, but his use of foam is a great tip for deep gaps, as it will adhere the old plaster to the structural wall, he used PVA (white glue/Elmers) just like Red Guard, may not be as strong, but it worked for him. I would never use Red Guard without re-adhering or removing the loose plaster, that's just piss poor workmanship! (fix-n-flip contractors are well known for covering cracks without repairing them, it's called "polishing a turd") The Painting and Decorating contractor did a great job and demonstrated some really useful tips, on what looked to me to be a nightmare!

@154Jamesp

4 жыл бұрын

@@superiorcarpetpaintllc4351 I agree the wall must be sound. I've used the Red Guard method on many stubborn cracks that reappear from movement of the structure, and it works every time. My intention was not to criticize his work, but to throw information out there for a DIYer looking to fix some cracks around the house. Not every crack is as severe as the one repaired in the video.

@superiorcarpetpaintllc4351

4 жыл бұрын

@@154Jamesp Good point, and I didn't mean to put you on the spot, most of the time in the US you will come across this sort of plaster failure on exterior stucco walls, plastered interior walls are not very common anymore and take a special touch to make them right, I wont take jobs like the one in this video, it would be cheaper to demo the walls and hang new sheet rock, IMHO. I am going to try his screwdriver foam tip on some stucco repairs that I have coming up this spring, not that I have any in mind, it's just that every stucco re-color we do always has nasty cracks that result in loose stucco that has to be removed and redone, very labor intense...

I see you used PVA. We always used GARDZ by Zinsser, which also is as thin as water to aid saturation of gypsum and paper (and anything porous). Also it's a great primer under wallpaper. It makes porous surfaces impervious to water or paste. Great adhesion and easy to strip and wash when removing the wallpaper. Nice video!

@PaintingandDecorating

3 жыл бұрын

Thank you and yes Zinsser have some great products.

Sir. Watched the entire video (rare for me). Then read ALL the comments. NEVER before have I seen a person so positively responsive to questions. Excellent. Very well done. I get the feeling that you are a true passionate professional (like me, only I'm in a different trade).

@PaintingandDecorating

5 жыл бұрын

Thank you, sorry for late reply some comments I miss.. so many.

Great professional Job. Thank you.

@PaintingandDecorating

4 жыл бұрын

Thank you.

That is without a doubt a good example of a house settling crack, people don't realize that it is what you don't see under the sheet rock that can come back to haunt you. It does truly need to be gouged out and totally filled. Personally something that big I would've split the wall and sheetrock half the wall but it's a good video for repairs.

@Nadyamantra

4 жыл бұрын

Mark Brown this isnt sheetrock though these are plaster walls.

Great tutorial. Thanks for sharing

@PaintingandDecorating

5 жыл бұрын

Thank you.

Thanks for this tutorial. Very interesting and I learned a lot.

Your video the best some people they do video they don’t show up what we need thanks 🙏

Blimey, they're some cracks! Top job mate👍🏻

I been decorating for 20 years and I am learning from this man !

@PaintingandDecorating

4 жыл бұрын

Cheers mate.. thanks

@peterolley7159

4 жыл бұрын

@@thegriffmeister3127 did you say something your message came out blank ?

@peterolley7159

4 жыл бұрын

@@thegriffmeister3127 brilliant your amazing

@peterolley7159

4 жыл бұрын

@@thegriffmeister3127 you talk like I actually don't know how to repair a cracked wall ..I complement him on the way he did it ,,you then tell me I don't know what I'm doing . Maybe I would deal with it differently infact I do sort cracks out differently to him and you ..I think you should not patronise people making out you know better than me ! I've painted places that you wouldn't even believe ! Although I could prove it quite easily if you want ?

@peterolley7159

4 жыл бұрын

@@thegriffmeister3127 I'm sorry but you just sound like a know it all and your first comment you made to me prooved what type of person you are ,,I watched the man's video and pointed out that I was still learning as I have not seen it done like that before . It's not what would do anyway and I can't be bothered to tell you my way of doing anything because you are not a nice person ,,you put me down and you don't even know me ,,book or dvd your still a complete tool

Thanks for your techniques , job well done.⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️⭐️

Thanks for the detailed explanation. Very meticulous work.

@PaintingandDecorating

4 жыл бұрын

Thanks, your welcome.

After watching this superb video, I have subscribed to your channel and looked through all of your videos. Firstly a big thank you, good strong, calm and sensible advice, top tips even the one about stress when decorating was an inspiration for someone who only does it occasionally and tends to try and rush things, then gets annoyed at the results, I think I may come back and watch that one alone - every time I embark on a decorating task:) THANK YOU your a star

@PaintingandDecorating

5 жыл бұрын

Thanks very much.

@PaintingandDecorating

5 жыл бұрын

@@ibbysvloggs1018 No, generally you only sand a flat surface, so no sanding embossed papers. Everything gets checked over for lumps things to sand back. If done correctly future decorating does not take as long.

@PaintingandDecorating

5 жыл бұрын

@@ibbysvloggs1018 There's a little-known but foolproof defence against sharks. Sharks will only attack you if you're wet. You need a good sense of humour and to enjoy painting and decorating to get the perfect finish and the buzz of satisfaction.

@kathleenschwitalla4484

5 жыл бұрын

Sammy DeHavilland i

Class master class... Respect :)

@PaintingandDecorating

6 жыл бұрын

geoff toner Thanks.

Hi....A really good video showing how to deal with wall cracks and the preparation for repainting.....very helpful .....well done and thanks.

@PaintingandDecorating

4 жыл бұрын

Thank you, your welcome.

As a novice this is top drawer info. Cheers for posting.👍

@PaintingandDecorating

3 жыл бұрын

Thank you.

Finally a non cowboy! Joy to watch your work.

@PaintingandDecorating

6 жыл бұрын

Thanks, mate.

Thats so smart. And requires minimal work. I love the drill method.

@PaintingandDecorating

5 жыл бұрын

Thank you.

I love your technique! I was wondering how I could fix cracks similar to these and now I know how. Thanks so much!!!

So helpful. Using this method today. Thanks for sharing.

Excellent video. Thank you..

Nice, thorough job! Thanks for posting. My home is sheetrock(wallboard), but good to see plaster repairing, too.

@PaintingandDecorating

6 жыл бұрын

Thanks.

That wall was exactly the same as I had, some of the parts had separated from the bricks New to the problem I was thinking that what would work to glue stone ballast down on your trackwork on a model railway would probably work with loose mortar as well. On parts that were loose I did what you did, open up the cracks and used diluted PVA wood glue, with a drop of dishwashing liquid to break the surface tension and make it soak in better. But in addition I made holes with an old screwdriver, slowly turning the blade round in an angle downwards, which will ease the application of PVA Then I used a squirt bottle (like they use in a laboratory) to inject copious amounts of diluted PVA between the wall and the mortar, and this three times with an hour in between to let it soak in but not dry entirely. After drying a couple of days the wall sounded not hollow anymore, and the mortar was bonded to the wall and the mortar itself also would have soaked up a fair bit and be not that sandy anymore. The wall has been repaired this way 7 years ago now and there is still no separation between the wall and the mortar/plaster. Currently I'm renovating another room and using the same method over, for the 2 walls which are still mostly OK, but the other 2 walls had to be stripped down to bare brick which you told is the best option when large parts have become loose. And now I got curious if this PVA method was used by professionals as well and I searched in YT, and yes! professionals do use it and PVA is even sold for that. I imagine what is sold in the Netherlands as "voorstrijk" (pre-prep) is the same, although it doesn't say PVA on the can, maybe in the contents listing it does.

@mussie302

Жыл бұрын

I've used this trick as well in our house. I drill holes all over the hollow area and inject PVA a few times. When it's dried off you can hear that the plaster has bonded to the brick again. Works a treat. 👍

Very interesting.... thank you

Very helpful , thank you very much for sharing 👍

@PaintingandDecorating

5 жыл бұрын

Thank you.

Nice trick with the spray foam. Thank you

@PaintingandDecorating

5 жыл бұрын

Thanks.

I’ve been doing exactly this today. Although I backfilled with bonding plaster and skimmed, except where the voids were more than 25/30mm deep.

@jayman6905

3 жыл бұрын

Fill voids with dot and dab spare piece of plasterboard in void, let dry, add skrim tape, pva, then skim. Job done

@DaddyBear3000

3 жыл бұрын

@@jayman6905 if the gap is wide enough, that is definitely the way to go.

Nice work. Makes me want to go fix cracks in the wall.

Fantastic skill and knowledge.

Thank you i just watched it all ive just learnt from you.

@PaintingandDecorating

6 жыл бұрын

Thanks.

Thanks to your videos a pot of exterior grade (waterproof) PVA is now a permenant addition to my kit when I go on a job. Previously I only sprayed water into raked out cracks but now I'm convinced that PVA would create a much greater bond as well as firm up a friable substrate. You have helped me once again!

@PaintingandDecorating

6 жыл бұрын

Thanks just be careful never use the waterproof PVA myself just the ordinary PVA. Waterproof may be ok on exterior with just using cement. But never use near water based paints.

@adriansandry2783

6 жыл бұрын

What's the problem with waterproof PVA with water based paints? I use it primarily to seal and prime cracks before filling. It works a treat. I'll never use just water again.

@manwithapan9481

6 жыл бұрын

I've never used waterproof PVA indoors because I always mix the PVA with water to thin it down, which I'm not sure would work with waterproof PVA ? Would it ? Anyone ?

They now make a low expansion expansion foam which gives you bit more control. Great little video.

@PaintingandDecorating

3 жыл бұрын

thank you.

Great to see somebody doing a proper job and not just filling the crack which will reappear.

@PaintingandDecorating

4 жыл бұрын

Thank you.

That was a very good video very informative and a very good way also the only permanent wayof dealing with cracks ... you and your brother are true pro's which is very good to see

@PaintingandDecorating

7 жыл бұрын

Thanks.

Great vid. Great advice. Professional work.

@PaintingandDecorating

5 жыл бұрын

Thank you.

amateur diy and this worked for me for a large ceiling crack, good video. thumbs up

@PaintingandDecorating

3 жыл бұрын

Thank you...

Fine work play sir

Bit sceptical at first..with the foam trick...but fair play & credit where it's due...nice video..I'll give it a try. Cheers

I use backing/bonding plaster to fill deep gouges or damaged plaster like that. This has worked great for me. I suppose the foam dries quick though but I'm not convinced how much it would stabilise.

@PaintingandDecorating

4 жыл бұрын

Sorry for late reply understand your feeling but it has not let me down and sorted some persistent cracks out..

a very long video, but great content covering all the main points. Thank you for sharing.

@PaintingandDecorating

3 жыл бұрын

Thank you.. your welcome.

I use toupret lite filler dries quick and is flexible for a quick job and customers happy it doesn't cost them a lot of money 💰 job done

I don’t have the patience to do such a thorough job.

@PaintingandDecorating

6 жыл бұрын

Sometimes I do think I do too much.

@jankozsna6250

5 жыл бұрын

Hard working lad

Hiya, thanks for all your great tips. Can you do a video of chasing the walls for wall lights and switches, would be so grateful as you are the decorating meister!

@TRICK-OR-TREAT236

3 жыл бұрын

NEVER CHASE THE WALLS. ALWAYS LET THEM CHASE YOU.

Absolutely superb stuff. Thank you for sharing your knowledge. Game changer 👌👏👏👏👏👏

@PaintingandDecorating

2 жыл бұрын

Thank you.

Excellent video! Thank you

@PaintingandDecorating

4 жыл бұрын

Thanks.

Great video, thanks. It would have been nice to see the final painted result at the end - I suspect it was flawless

@PaintingandDecorating

3 жыл бұрын

Thanks. Look in the description for links to other videos.

@smeg4brainz910

3 жыл бұрын

@@PaintingandDecorating just watched it. Very nice!

Love the box of used sandpaper, that's old school!

@PaintingandDecorating

5 жыл бұрын

It's all about least amount of waste.

Made it look so easy. Good job well done

@PaintingandDecorating

4 жыл бұрын

Thank you.

Well are tools look the same. Top notch friend, just what I thought.

@PaintingandDecorating

6 жыл бұрын

Thanks.

The bottom line is when you see cracks forming like this you need to investigate why. Is there something structural going on. Just repairing this crack might not last. It could open again.

Instead of polyfilla, I find that joint compound is also very good and cheaper Great vid

@PaintingandDecorating

6 жыл бұрын

Well, you do pay for the right stuff for the job. Would never use anything not made for the task.

@jeromegarcia5396

4 жыл бұрын

Hot mud... Nothing more than hot mud and fiberglass tape... It doesn't shrink, and dries harder, the tape is to insure integrity of the fill gap, then you cover it all with a 2 1/2 foot floated patch... Materials differ in other countries, but even lime plaster would work very well if you can't find 5, 20, 45, 90 minute hot mud... And yes I'm a pro, not knocking anyone just giving knowledge to test and make your own choice, spend all day on a patch or 2 hours... I work with investors flipping homes, and I can't tell you how annoying it is when quality takes a back seat because time tables.... I've dealt with monster refurbs where cracks reappear before the paint dries because they refuse to fix the foundation... Palm on face... So my method is pretty much the best you can get for cost and time and durability... Just a heads up spreading love...

I think this is one of the best video especially for someone who doens't understand about trades like me.Thank you

@PaintingandDecorating

3 жыл бұрын

Thank you your welcome

This was the best video I've seen so far! I wish you could come and do my place that I'm redoing for my landlord! Thank you again for this video

always wanted to try back filling with foam, great vid will try now.

@PaintingandDecorating

6 жыл бұрын

Thanks, it does work perfectly.

Tried this technique to the horror of my wife but it worked out really well on a crack I have repaired a few times before. Thanks for the tips and tricks of the trade.

@PaintingandDecorating

2 жыл бұрын

your welcome

@madojemubodecourage6055

2 жыл бұрын

Nice one

I do the same method too, proper way to do it. Great video 👍🏻

@PaintingandDecorating

5 жыл бұрын

Thank you.

@michaelstojsavljevic8453

5 жыл бұрын

Painting and Decorating no worries mate

Really helpful and well explained thank you

@PaintingandDecorating

4 жыл бұрын

Thank you.

You know that you can’t mask off about twice the distance of the crack and spray your texture and knock it down when ready or leave as texture is. Once dry you can sand it down lightly then take a tile setters orange sponge and a bucket of water and fill sponge up with water the wring it out some then wipe down on the outside of texture area where you didn’t want more texture. What it does is blends the texture in so it makes a much more natural original look as if the crack was never there. Also on major cracks I use fiberglass tape and hot mud. Fill in crack or hole with abit of mud then put fiber tape on it and coat it! Makes a super strong anti cracking technique! I use it a lot of peaked vaulted ceilings and off angle ceilings where you know regular tape and mud will crack out! Just a friendly suggestion! I’ve done drywall for many yrs as a living and it’s techniques like this I’ve used for many yrs!

Superb, glad to see some one else doing a briant job. What would we do without expanding foam. good video

@PaintingandDecorating

4 жыл бұрын

Thank you..

Thank you for this ! My daughters room has a a crack like that , now I'll be able to fix it properly

@PaintingandDecorating

Жыл бұрын

Your welcome

Very good I informative tutorial cracks are a pet peeve of mine I get alot of hairline cracks in my old property especially in my bathroom. I recently had to large movement cracks in my hallway but my Landlord just did a basic skim job and the cracks came back after 10 months. This is what they were going to do but did the lazy option twice. I just did my own repair and will see how long it lasts :)

@PaintingandDecorating

4 жыл бұрын

Thank you, yes cracks can be a problem two types of crack.... something drying out.. or movement cracks... first one easy to sort out.... second one you need to stop the movement Foam!!

I used a hot melt glue gun on ceiling cracks , same as what u done drilled out and filled worked a treat as well

@spencerrose3194

6 жыл бұрын

hoodie You using hot glue in plaster? I'll be really interested find out where you got this information on the correct methods of filling cracks on plaster.

@stephensaines7100

6 жыл бұрын

Hot glue doesn't penetrate though, it's just a superficial skin bond. You need something that penetrates the surrounding area, not hardens on the surface of it. Even superglue would work better than hot glue. Polyurethane adhesive would work well, but set-up time is at least hours.

@pcno2832

5 жыл бұрын

Stephen Saines: I took it to mean that he injected it in the holes, which would work with enough glue and holes. I guess the instant hardening gave it an edge over the adhesive, or even the foam, but I'd be a little afraid of the stuff dripping on my head.

@malcolmmetcalf6566

5 жыл бұрын

I have a seasonal cottage which of course draws damp during the winter months and not in use. I had cracks occurring again and again until I was recommended to put a little caulking in the reamed out crack, allow it to dry and then plaster. It a worked a treat and once treated the cracks have never returned :-)

Great video thanks! Do you ever repair lathe and paster cracks... Simllar technique? What do you do if the horse hair lime plaster has debonded from the lathes?

@PaintingandDecorating

4 жыл бұрын

Thanks, remove the loose plaster and replaster using a recommended plaster for it. If its just small patches any plaster or filler will do.

wow, seems great.

@PaintingandDecorating

5 жыл бұрын

Thanks.

Excellent tips

Dude LOVED this video! Thank you so much! I was really worried that I had subsistence as I've got a bunch of hairline cracks in my downstairs bedroom but I had someone out they said it's just old plaster and could be repaired so I'll be doing this! I've never lived in a house where there hasn't been cracks in some of the walls!

@PaintingandDecorating

4 жыл бұрын

Thank you, yes most houses have cracks usually never structural or subsidence just settling cracks.

@kingsknightuk

4 жыл бұрын

@@PaintingandDecorating Just always find it strange that 30 year old houses are still settling haha

@PaintingandDecorating

4 жыл бұрын

@@kingsknightuk When I say settling what I should say is that houses breath in a sense. The difference between temperatures in summer and winter things expand and shrink all the time.

Very helpful, any videos or advice for cracks on an internal block wall?

@PaintingandDecorating

6 жыл бұрын

cormaccrawley that depends on how much movement. If it's just a crack you can use the same method in the video. But if you have movement you may need to under pin. Or use metal rods which sit across the crack and are glued in place to stop the crack pulling apart.

1:48 I fixed my ceiling exactly the same way about 10 years ago, and have been suggesting it to my neighbors; all the condos in my area were built the same way, with Sheetrock nailed directly to 22' 2X12s, so they all crack in the middle of the span. But I've never seen anyone else recommend it; some just mud&tape over it (for a fix that might or might not get through the next winter) while others actually cut open the ceiling and screw a board under the crack. I'm sure the board method usually works, but I've got what seems to be a permanent fix with a lot less work. Nice to see someone informing the rest of the world about this.

@PaintingandDecorating

5 жыл бұрын

Thank you, yes fast way.

Most useful video I’ve found on this subject, thanks.

@PaintingandDecorating

2 ай бұрын

Thanks