Hope this helped, driver updater link below this :o Link: shop.kysona.com/blogs/news/up... #gaming #competitive #fortnitecompetitive #fortnite #mouse #gamingmouse
Жүктеу.....
Пікірлер: 128
@aqohn85262 ай бұрын
yo guys if you guys are stuck on the update file, make sure you have the usb cable plugged into your mouse, dont do wireless. Make sure your mouse is plugged in and then you will be able to update
@alcapone2928
2 ай бұрын
sadly it doesnt work even that way, idek what im supposed to do to make it work, i might just return it
@toxy7605
Ай бұрын
@@alcapone2928 idk if u still have the mose but i had the same problem what i did is unplut the plut plug in the C cable and when u turn the mose around switch the switch on BT
@feardaron1240
Ай бұрын
It worked for me I saw you guys’s comments, and i did it my on purpose to help you guys out
@C3nt-n9u2 күн бұрын
thx bro this fully fixed my sensor spinning out
@ferdinandmarcus6690Ай бұрын
How do i revert it up to the normal software of the mouse? the update on the firmware of my mouse got worse.
@rajaislive956518 күн бұрын
GOD BLESS YOU BROTHERRRR I FKIN LOVE U SO MUCHH
@bando_kid-i2 ай бұрын
I love you bro.Thanks for the help
@vylo153020 күн бұрын
How can I know if I have a new batch or an old batch what is written on it to indicate?
@tinydynahybrid6 күн бұрын
hi, talon, I've been trying to fix this problem for about 30 minutes now but it's gotten nowhere. Basically, I tried everything in the comments like changing the docking mode, plugging it in but whenever i open the "update" file it doesn't allow me to update, there update icon is there but i cant click it, it's just not working and i need help since this is my new mouse that I've just got today..
@4avy20 күн бұрын
can you still use the m600 software while wireless or just wired?
@Rip_Cam2 ай бұрын
Bro what do I do if it goes red and doesn’t render at all ?
@kazutokirigaya94692 ай бұрын
i have this problem where in when its low bat and going to use wired. it wont work it only work on wireless i dont know what to do please help\
@mrkoalamanda
2 ай бұрын
have u turned off? under mouse there is a switch u can put to left for wifi middle is off and right is bluetooth. While wired it needs to be off
@kazutokirigaya9469
2 ай бұрын
@@mrkoalamanda yes ive tried that and it requires restart pc to use wired. when its new bought its okay but later on it has this issue
@rei9521
Ай бұрын
did u find a fix?
@mateuszwidulinski3398Ай бұрын
I just bought X3 pro and I cand find software or firmware which would work with this mouse. I have Attack Shark x3 pro soft but it is showing "search device" forever, if i instal attack shark X3 software then i get message "no device". Anyone same issue ?
@jhowcarvalho9533
Ай бұрын
Yes, I have the same problem, but I still can't fix it
@mateuszwidulinski3398
Ай бұрын
@@jhowcarvalho9533 Just managed to download software from their official website and everything works fine now.
@RhonnyCich
Ай бұрын
same
@blueleaksАй бұрын
My Attack Shark X6 mouse started working worse after this method. The backlight (indicator) stopped working, the modes themselves switch. Bluetooth on this mouse stopped working, 2.4 GHz instead of green started burning blue, as if it is connected via Bluetooth. Can someone please help me fix my mouse!
@mohamedallouche5873
Ай бұрын
Bro this video is not for the X6 its x3 Even with x3 this video is half wrong , there is 3 version of x3 => V1 /V1.1/V2 This video probably works on v1.1 only if u try it in other version u gona brick your mouse forever
@rajaislive956518 күн бұрын
Hey brother even with usb connected my firmware wont update kindly assist
@Cardo_Gaming2 ай бұрын
hey i just got attack shark x3 pro and im having issue rn while im playing games my right click just stopped working i have to click twice, but when i got to a website searching right click test when i test it its working properly i think the mouse is purposely sleeping but do you have any information to fix it?
@Loukii115
2 ай бұрын
Have you updated the firmware and drivers? These mice don't work properly without some tweaking and adjustments.
@Cardo_Gaming
2 ай бұрын
@@Loukii115 yeah
@Lyf3less
2 ай бұрын
@@Loukii115 how would you update it im stuck with it bugging and stuff
@suryantoyeo4399
2 ай бұрын
i have the same problem, its just going to sleep when i leave the mouse maybe 20-30 second, cant find solution, i must click many time to respon again
@WoodWaxАй бұрын
Yo can i get a link of that wallpaper?
@zaldown10722 ай бұрын
thank 😍
@mohamedallouche5873Ай бұрын
Does the mouse screw u over while playing with the charging cable on ? Im gona buy it and im pretty sure im gona get a bad copy that works bad in wireless, (can't buy an expensive one ,i have low budget)
@lukain4640
Ай бұрын
I bought it and it works perfectly, and I didn't even need to do anything cuz it doesn't cause any bugs now, and the software is updated and free from bugs, I have been using it for more than 1 month..maybe more. I would recommend buying it and then only download it's original software. It works perfectly!!!!
@OhRazer
Ай бұрын
@@lukain4640can you send the link for the original software download, and does it include a debounce setting?
@taenichi17616 күн бұрын
What KB do u use?
@zch4mp8902 ай бұрын
i have attack shark x3 pro 8k and i cant update with ur tutorial, do u know how to fix this issue with the sensor?
@aronmirandaph7756
Ай бұрын
did u fix it?
@MurilloVengeance5 күн бұрын
i didn`t nothing and suddenly my mouse stoped working, when i plug to pc and open the software it shows "device sleep" wtf
@longvu1200
4 күн бұрын
same issue
@fluffyeggs60382 ай бұрын
so you cant use it with wireless???
@aaa-ky1de2 ай бұрын
in my mouse the blinking red stop but it doesnt work properly while im using wireless
@Tal0nz1
2 ай бұрын
What’s happening in wireless mode?
@rouxj666
2 ай бұрын
Bro red blinking indicates low battery, all you need to do is charge your mouse until the light shows green.
@Cardo_Gaming2 ай бұрын
the update software dosent work trying ti install it but its stuck
@dqsaa
Ай бұрын
plug it in
@charlieholmes85272 ай бұрын
when i get to the part where it says update i cannot do it like the update button is grey any help?
@Tal0nz1
2 ай бұрын
I recently can t find any fix for it. I will keep looking tho
@anirudhchari165
2 ай бұрын
make sure u have the mouse plugged in at that point. i had the same issue
@reavervandal49120 күн бұрын
can i update the firmware and use the attack shark software? it has angle snapping and i want to use it
@beerez
18 күн бұрын
yes
@myluffy18683 ай бұрын
after you update can u still use wireless? is there any problem?
@Tal0nz1
3 ай бұрын
You can use it wireless still after
@martin3761Ай бұрын
bro my mouse just got bricked by this in device manager says Unkown USB device Set adress failed, can anyone help me with this
@ali_channel_1
Ай бұрын
The same as mine
@ali_channel_1
Ай бұрын
I find the fixing for our problem My mouse came back to life
@Voxeo2 ай бұрын
I just got the mouse a week ago and it wont charge? any fixes
@Tal0nz1
2 ай бұрын
so it wont work in wired mode? Idk how to fix it...
@Voxeo
2 ай бұрын
@@Tal0nz1 it works in wired mode. It just does not charge
@Tal0nz1
2 ай бұрын
Wait I don’t understand, if it works in wired then it should be charging by default since it’s plugged in 😭
@Tal0nz1
2 ай бұрын
I might be slow
@Voxeo
2 ай бұрын
@@Tal0nz1 The mouse works when it’s wired and works wireless. But when I use it when it’s wired it does not charge, but it still works
@marcolouw53532 ай бұрын
Yoo bruh, would you say it is better than the viper mini after using it for a while? You think I should get it?
@marcolouw5353
2 ай бұрын
Have you tried a 4khz mouse yet?
@Tal0nz1
2 ай бұрын
Yes I REALLY like the shape and feel of the mouse
@lerox892 ай бұрын
i upgraded but my mouse still randomly freezes
@PaulAndreiMEder
Ай бұрын
same here, might be attack shark x6 issue
@blueleaks
Ай бұрын
@@PaulAndreiMEder my attack shark x6 mouse get worse after this method
@precious39473 ай бұрын
u have the old model the recent ones they sell have a new board and fixed all the issues.
@Tal0nz1
3 ай бұрын
Yes
@champwo224
2 ай бұрын
so you can use the asx3 software on newer batches of the mouse?
@precious3947
2 ай бұрын
@@champwo224 ye i have one
@Tal0nz1
2 ай бұрын
@@champwo224 yes cause newer models of the mouse most likely work well
@frostbite9211
2 ай бұрын
@@Tal0nz1hey man how do I know if it’s a new bath or not I bought the lavender version so is that a new batch
@onecookiegaming8863Ай бұрын
i did this and now my mouse completely does not work
@Firstfyre
Ай бұрын
he said do it at your own risk.
@ali_channel_1
Ай бұрын
I have a solution for it
@yoshieuler
12 күн бұрын
what solution@@ali_channel_1
@abood-lf7dp16 күн бұрын
why "do at own risk"
@damemkd233 ай бұрын
i ordered the mouse i just wanna ask why to use m600 and not the attack shark software?
@Tal0nz1
3 ай бұрын
When you try to update the drivers with attack shark x3 software, it won’t work
@frostbite9211
2 ай бұрын
@@Tal0nz1 the new batch should work no?
@theltenetwork92033 ай бұрын
So I randomly get that issue where it will disconnect until I lift off the mousepad and start moving again too. It only occurs a handful of times during the week for me and I did notice that it occurred less frequently when I used a dongle to move the receiver closer to my mouse + connect it to the usb port at the front of the case. Additionally, I updated the receiver off of the same Kysona website but the blog post from October 19th, 2023. The issue doesn't happen frequently enough or is significant enough for me to use it wired all the time now, although I have been mostly playing Valorant and some aim trainers as of late. I'm also now on the Attack Shark X3 software because for some reason the Kysona m600 software caused my mouse to hold spray after clicking the mouse button multiple times.
@Tal0nz1
3 ай бұрын
Oh thats strange but do what ever works for you. May I ask what receiver you have? Is it the one from logitech?
@COLD_bridge
3 ай бұрын
@@Tal0nz1 Dear brother may i ask you is Key Response Time the same as Debounce time?
@theltenetwork9203
2 ай бұрын
@@Tal0nz1 I used an old dongle off of a Viper V2 Pro that I gave to a relative who doesn't game. I didn't like that mouse's shape at all as it would cramp my hand. Ultimately I gave up on the Attack Shark X3 as the sensor issues began to get worse over time. Even after attempting to troubleshot via updating the receiver again the issues persisted. I ended up purchasing an Endgame Gear OP 1 8k which I have enjoyed way more than the Attack Shark X3.
@Tal0nz1
2 ай бұрын
@@theltenetwork9203 Ok, that’s cool and I’m glad your enjoying your new mouse that works for you :)
@silentdanoob276Ай бұрын
use the new drivers for the x3 :)
@mohamedallouche5873
Ай бұрын
U fixed the disconnecting issues?
@ali_channel_1
Ай бұрын
Drop a link please
@silentdanoob276
Ай бұрын
@@mohamedallouche5873 yep
@OhRazer
Ай бұрын
@@silentdanoob276link?
@user-si5xr7qn7sАй бұрын
Is this yuta
@ryanshare38872 ай бұрын
this shi made my mouse stop working
@onecookiegaming8863
Ай бұрын
did you find a way to fix your mouse mine is doing the same thing
@martin3761
Ай бұрын
same
@ali_channel_1
Ай бұрын
The same here my mouse dead
@mt_dontplay2762
14 күн бұрын
@@ali_channel_1did u fix it ?
@ali_channel_1
14 күн бұрын
Yes@@mt_dontplay2762
@lepetitninja79029 күн бұрын
Why is it in chinees
@mdot563252 ай бұрын
my mouse dont want to update
@Tal0nz1
2 ай бұрын
What do you mean?
@zmarchen
2 ай бұрын
@@Tal0nz1 i cant update it too
@Tal0nz1
2 ай бұрын
@@zmarchen what’s happening?? What’s showing??
@zmarchen
2 ай бұрын
@@Tal0nz1 i have the screen for the update but i cant press it
@zmarchen
2 ай бұрын
and my mouse bugs like shit and im getting mad bc of it
@mt_dontplay276214 күн бұрын
Bro ur a weirdo u did not say nothing about if u unplug ur mouse wire it will stop the mouse from working , I just got it too 30 gone in 5 sec😢
@mt_dontplay2762
14 күн бұрын
Nvm guys if u have a loose USB port and ur wire unplugged by accident like me. Just charge it then click on the file again plug it back in and update again make sure it doesn’t unplug if it does do it again after that it should work
@JasonNguyen27212 ай бұрын
i updated all but went i use x3 on my pad, it doesnt smooth at all, sometimes it work very good sometimes x3 acting like the censor stuck in something, it like a glitch but i cant fix it. When i use without pad it clearly fix. I dont know what's wrong with my x3. Can you find out what problem is? Is their any problem with my pad? Because when i use wire mouse it doesnt lag or stuck or anything :((
@Tal0nz1
2 ай бұрын
Whats your mouse hz at?
@JasonNguyen2721
2 ай бұрын
@@Tal0nz1 always 1000hz brother
@Tal0nz1
2 ай бұрын
Try maybe cleaning the bottom of the mouse and also clean your mouse pad just in case, you should probably just use the mouse wired since wireless has a bunch of bugs :((
@Tal0nz1
2 ай бұрын
I had to stick to using the mouse wired :(( all good tho
@mohamedallouche5873
Ай бұрын
@@Tal0nz1is it good for playing competitive games wired?? Does all the problems go away ?
Пікірлер: 128
yo guys if you guys are stuck on the update file, make sure you have the usb cable plugged into your mouse, dont do wireless. Make sure your mouse is plugged in and then you will be able to update
@alcapone2928
2 ай бұрын
sadly it doesnt work even that way, idek what im supposed to do to make it work, i might just return it
@toxy7605
Ай бұрын
@@alcapone2928 idk if u still have the mose but i had the same problem what i did is unplut the plut plug in the C cable and when u turn the mose around switch the switch on BT
@feardaron1240
Ай бұрын
It worked for me I saw you guys’s comments, and i did it my on purpose to help you guys out
thx bro this fully fixed my sensor spinning out
How do i revert it up to the normal software of the mouse? the update on the firmware of my mouse got worse.
GOD BLESS YOU BROTHERRRR I FKIN LOVE U SO MUCHH
I love you bro.Thanks for the help
How can I know if I have a new batch or an old batch what is written on it to indicate?
hi, talon, I've been trying to fix this problem for about 30 minutes now but it's gotten nowhere. Basically, I tried everything in the comments like changing the docking mode, plugging it in but whenever i open the "update" file it doesn't allow me to update, there update icon is there but i cant click it, it's just not working and i need help since this is my new mouse that I've just got today..
can you still use the m600 software while wireless or just wired?
Bro what do I do if it goes red and doesn’t render at all ?
i have this problem where in when its low bat and going to use wired. it wont work it only work on wireless i dont know what to do please help\
@mrkoalamanda
2 ай бұрын
have u turned off? under mouse there is a switch u can put to left for wifi middle is off and right is bluetooth. While wired it needs to be off
@kazutokirigaya9469
2 ай бұрын
@@mrkoalamanda yes ive tried that and it requires restart pc to use wired. when its new bought its okay but later on it has this issue
@rei9521
Ай бұрын
did u find a fix?
I just bought X3 pro and I cand find software or firmware which would work with this mouse. I have Attack Shark x3 pro soft but it is showing "search device" forever, if i instal attack shark X3 software then i get message "no device". Anyone same issue ?
@jhowcarvalho9533
Ай бұрын
Yes, I have the same problem, but I still can't fix it
@mateuszwidulinski3398
Ай бұрын
@@jhowcarvalho9533 Just managed to download software from their official website and everything works fine now.
@RhonnyCich
Ай бұрын
same
My Attack Shark X6 mouse started working worse after this method. The backlight (indicator) stopped working, the modes themselves switch. Bluetooth on this mouse stopped working, 2.4 GHz instead of green started burning blue, as if it is connected via Bluetooth. Can someone please help me fix my mouse!
@mohamedallouche5873
Ай бұрын
Bro this video is not for the X6 its x3 Even with x3 this video is half wrong , there is 3 version of x3 => V1 /V1.1/V2 This video probably works on v1.1 only if u try it in other version u gona brick your mouse forever
Hey brother even with usb connected my firmware wont update kindly assist
hey i just got attack shark x3 pro and im having issue rn while im playing games my right click just stopped working i have to click twice, but when i got to a website searching right click test when i test it its working properly i think the mouse is purposely sleeping but do you have any information to fix it?
@Loukii115
2 ай бұрын
Have you updated the firmware and drivers? These mice don't work properly without some tweaking and adjustments.
@Cardo_Gaming
2 ай бұрын
@@Loukii115 yeah
@Lyf3less
2 ай бұрын
@@Loukii115 how would you update it im stuck with it bugging and stuff
@suryantoyeo4399
2 ай бұрын
i have the same problem, its just going to sleep when i leave the mouse maybe 20-30 second, cant find solution, i must click many time to respon again
Yo can i get a link of that wallpaper?
thank 😍
Does the mouse screw u over while playing with the charging cable on ? Im gona buy it and im pretty sure im gona get a bad copy that works bad in wireless, (can't buy an expensive one ,i have low budget)
@lukain4640
Ай бұрын
I bought it and it works perfectly, and I didn't even need to do anything cuz it doesn't cause any bugs now, and the software is updated and free from bugs, I have been using it for more than 1 month..maybe more. I would recommend buying it and then only download it's original software. It works perfectly!!!!
@OhRazer
Ай бұрын
@@lukain4640can you send the link for the original software download, and does it include a debounce setting?
What KB do u use?
i have attack shark x3 pro 8k and i cant update with ur tutorial, do u know how to fix this issue with the sensor?
@aronmirandaph7756
Ай бұрын
did u fix it?
i didn`t nothing and suddenly my mouse stoped working, when i plug to pc and open the software it shows "device sleep" wtf
@longvu1200
4 күн бұрын
same issue
so you cant use it with wireless???
in my mouse the blinking red stop but it doesnt work properly while im using wireless
@Tal0nz1
2 ай бұрын
What’s happening in wireless mode?
@rouxj666
2 ай бұрын
Bro red blinking indicates low battery, all you need to do is charge your mouse until the light shows green.
the update software dosent work trying ti install it but its stuck
@dqsaa
Ай бұрын
plug it in
when i get to the part where it says update i cannot do it like the update button is grey any help?
@Tal0nz1
2 ай бұрын
I recently can t find any fix for it. I will keep looking tho
@anirudhchari165
2 ай бұрын
make sure u have the mouse plugged in at that point. i had the same issue
can i update the firmware and use the attack shark software? it has angle snapping and i want to use it
@beerez
18 күн бұрын
yes
after you update can u still use wireless? is there any problem?
@Tal0nz1
3 ай бұрын
You can use it wireless still after
bro my mouse just got bricked by this in device manager says Unkown USB device Set adress failed, can anyone help me with this
@ali_channel_1
Ай бұрын
The same as mine
@ali_channel_1
Ай бұрын
I find the fixing for our problem My mouse came back to life
I just got the mouse a week ago and it wont charge? any fixes
@Tal0nz1
2 ай бұрын
so it wont work in wired mode? Idk how to fix it...
@Voxeo
2 ай бұрын
@@Tal0nz1 it works in wired mode. It just does not charge
@Tal0nz1
2 ай бұрын
Wait I don’t understand, if it works in wired then it should be charging by default since it’s plugged in 😭
@Tal0nz1
2 ай бұрын
I might be slow
@Voxeo
2 ай бұрын
@@Tal0nz1 The mouse works when it’s wired and works wireless. But when I use it when it’s wired it does not charge, but it still works
Yoo bruh, would you say it is better than the viper mini after using it for a while? You think I should get it?
@marcolouw5353
2 ай бұрын
Have you tried a 4khz mouse yet?
@Tal0nz1
2 ай бұрын
Yes I REALLY like the shape and feel of the mouse
i upgraded but my mouse still randomly freezes
@PaulAndreiMEder
Ай бұрын
same here, might be attack shark x6 issue
@blueleaks
Ай бұрын
@@PaulAndreiMEder my attack shark x6 mouse get worse after this method
u have the old model the recent ones they sell have a new board and fixed all the issues.
@Tal0nz1
3 ай бұрын
Yes
@champwo224
2 ай бұрын
so you can use the asx3 software on newer batches of the mouse?
@precious3947
2 ай бұрын
@@champwo224 ye i have one
@Tal0nz1
2 ай бұрын
@@champwo224 yes cause newer models of the mouse most likely work well
@frostbite9211
2 ай бұрын
@@Tal0nz1hey man how do I know if it’s a new bath or not I bought the lavender version so is that a new batch
i did this and now my mouse completely does not work
@Firstfyre
Ай бұрын
he said do it at your own risk.
@ali_channel_1
Ай бұрын
I have a solution for it
@yoshieuler
12 күн бұрын
what solution@@ali_channel_1
why "do at own risk"
i ordered the mouse i just wanna ask why to use m600 and not the attack shark software?
@Tal0nz1
3 ай бұрын
When you try to update the drivers with attack shark x3 software, it won’t work
@frostbite9211
2 ай бұрын
@@Tal0nz1 the new batch should work no?
So I randomly get that issue where it will disconnect until I lift off the mousepad and start moving again too. It only occurs a handful of times during the week for me and I did notice that it occurred less frequently when I used a dongle to move the receiver closer to my mouse + connect it to the usb port at the front of the case. Additionally, I updated the receiver off of the same Kysona website but the blog post from October 19th, 2023. The issue doesn't happen frequently enough or is significant enough for me to use it wired all the time now, although I have been mostly playing Valorant and some aim trainers as of late. I'm also now on the Attack Shark X3 software because for some reason the Kysona m600 software caused my mouse to hold spray after clicking the mouse button multiple times.
@Tal0nz1
3 ай бұрын
Oh thats strange but do what ever works for you. May I ask what receiver you have? Is it the one from logitech?
@COLD_bridge
3 ай бұрын
@@Tal0nz1 Dear brother may i ask you is Key Response Time the same as Debounce time?
@theltenetwork9203
2 ай бұрын
@@Tal0nz1 I used an old dongle off of a Viper V2 Pro that I gave to a relative who doesn't game. I didn't like that mouse's shape at all as it would cramp my hand. Ultimately I gave up on the Attack Shark X3 as the sensor issues began to get worse over time. Even after attempting to troubleshot via updating the receiver again the issues persisted. I ended up purchasing an Endgame Gear OP 1 8k which I have enjoyed way more than the Attack Shark X3.
@Tal0nz1
2 ай бұрын
@@theltenetwork9203 Ok, that’s cool and I’m glad your enjoying your new mouse that works for you :)
use the new drivers for the x3 :)
@mohamedallouche5873
Ай бұрын
U fixed the disconnecting issues?
@ali_channel_1
Ай бұрын
Drop a link please
@silentdanoob276
Ай бұрын
@@mohamedallouche5873 yep
@OhRazer
Ай бұрын
@@silentdanoob276link?
Is this yuta
this shi made my mouse stop working
@onecookiegaming8863
Ай бұрын
did you find a way to fix your mouse mine is doing the same thing
@martin3761
Ай бұрын
same
@ali_channel_1
Ай бұрын
The same here my mouse dead
@mt_dontplay2762
14 күн бұрын
@@ali_channel_1did u fix it ?
@ali_channel_1
14 күн бұрын
Yes@@mt_dontplay2762
Why is it in chinees
my mouse dont want to update
@Tal0nz1
2 ай бұрын
What do you mean?
@zmarchen
2 ай бұрын
@@Tal0nz1 i cant update it too
@Tal0nz1
2 ай бұрын
@@zmarchen what’s happening?? What’s showing??
@zmarchen
2 ай бұрын
@@Tal0nz1 i have the screen for the update but i cant press it
@zmarchen
2 ай бұрын
and my mouse bugs like shit and im getting mad bc of it
Bro ur a weirdo u did not say nothing about if u unplug ur mouse wire it will stop the mouse from working , I just got it too 30 gone in 5 sec😢
@mt_dontplay2762
14 күн бұрын
Nvm guys if u have a loose USB port and ur wire unplugged by accident like me. Just charge it then click on the file again plug it back in and update again make sure it doesn’t unplug if it does do it again after that it should work
i updated all but went i use x3 on my pad, it doesnt smooth at all, sometimes it work very good sometimes x3 acting like the censor stuck in something, it like a glitch but i cant fix it. When i use without pad it clearly fix. I dont know what's wrong with my x3. Can you find out what problem is? Is their any problem with my pad? Because when i use wire mouse it doesnt lag or stuck or anything :((
@Tal0nz1
2 ай бұрын
Whats your mouse hz at?
@JasonNguyen2721
2 ай бұрын
@@Tal0nz1 always 1000hz brother
@Tal0nz1
2 ай бұрын
Try maybe cleaning the bottom of the mouse and also clean your mouse pad just in case, you should probably just use the mouse wired since wireless has a bunch of bugs :((
@Tal0nz1
2 ай бұрын
I had to stick to using the mouse wired :(( all good tho
@mohamedallouche5873
Ай бұрын
@@Tal0nz1is it good for playing competitive games wired?? Does all the problems go away ?