I came hoping to see how to open the top and replace the gasket but since you had trouble getting that part I will just replace mine with a Fluidmaster filler now, this one is not as good of a design. I stayed for the cat and great quick how to!

Very thorough, detailed and clear instructions. Thanks for sharing

Масик научил чинить толчок, такой зая 💕

This video was very helpful! I had the similar model R&T a2417 valve,all new to me. it was leaking all over and the water would not stop running. I am used to using Fluidmaster products and didn't know if it would work with this "dual flush" thing but it works just fine. I got a fluidmaster valve for 10 dollars usd at ACE, the salesman cautioned to be sure the new one would fit the tank (watch height and width) but otherwise connect it and will be back up and running. the fluidmaster came with a new hose, clip, and retention ring. This video shows the same steps except underneath the tank the retaining nut was hard to remove. I used pliers and turned the valve counter/clockwise to loosen...keep a small pan and towels to catch water, after installing the new valve,you play with the water level setting and good to go.

Thx buddy I did it

Thank you! This was very helpful. I have the same model toilet and did not know what to do before seeing this video.

thanks Maciej!

Best explanation seen. Tqvm

Thanks again. Yeah, I haven’t fixed it yet. I’m a dead man if I don’t do it soon.

Thanks 👍

Damn. Somewhere in the middle i zoned out and began watching this as a video about car fuel pump repair.

How ca i adjust a fill ball valve

Can you replace it with a universal fill valve or does it have to be this same model? Having trouble finding this exact one.

@MaciejPiotrowski

6 ай бұрын

Glacier Bay, if you bought it at HD has lifetime warranty on the parts so you just have to contact them and and they should send you part for free. There should be a let nr on the bottom of the tank lid and it should also have your part nr.

@Billy-ho5ms

24 күн бұрын

I used a fluidmaster universal fill valve and its working just fine. the guy at ACE hardware (US) cautioned though, make sure you have enough width and height in the tank to accomodate the different valve. hooked it up to the old hose and working fine.

You have T connection, what is the second hose use for? Thanks

@MaciejPiotrowski

7 ай бұрын

I have water connection for bidet

@tyf4247

7 ай бұрын

@@MaciejPiotrowski I tried to connect a water hose from the tap to the water box, but the water did not enter, as if it was closed. What do you think is the reason?

@tyf4247

7 ай бұрын

By the way, when I connect water from the main connection, water enters and fills the tank

@tyf4247

7 ай бұрын

I will appreciate your help. Thanks

@MaciejPiotrowski

7 ай бұрын

@@tyf4247i have no idea . record video to show what is going on.

Replacing the whole toilet looks easier lol