Awesome video, man. Straight to the point rather than 30 minutes of rambling like most I've seen 👍

I have to thank you. I got to the part of checking your breaker panel, and all of my breaker was not in the tripped position I shut it off and turned it back on and was amazed that I got heat out of my dryer. Thank you for putting this video online

This is the second clothes dryer heating element I have seen you replace. Different models, but the same principles, and that really helps to see. But I had no idea that you could watch the red glow from the back. It makes perfect sense of course, but had never occurred to me. Another way to check things out. Great tip about pushing down on the new heating coils to make sure they don't short out and blow the fuse. In my house, with a cheap model of circuit breakers installed, it is hard to see that they have tripped. So you are right - you have to push really hard in the OFF direction, and then very forcefully and quickly in ON direction, to be sure of their status.

@hameedwafaAFG

Жыл бұрын

Yeh small stuff to keep in mind helps a lot .

Did the breaker thing, voila. Problem solved. Thanks Mr Hameed🙏🏻

@hameedwafaAFG

5 ай бұрын

That’s awesome 😄

❤ thank you, it was my breaker panel, if it was not for you I would be out $100s of dollars! Your great!

You made it look so easy to repair. I just might give it a try. Good Job... I sincerely appreciate it 😊

@hameedwafaAFG

Жыл бұрын

My pleasure!

Thank you for being so clear and thorough.

You are a craftsman, sir. Thank you!

Thank you; wonderful presentation 👍

@hameedwafaAFG

Жыл бұрын

You are very welcome!

Thanks for sharing!

Great video

@hameedwafaAFG

Жыл бұрын

Thank you!

Hello. Thank you for the video providing very useful info. I checked all things you mentioned and everything works correctly but somtimes has heat sometimes has not or less heat. What would be the problem on this situaton. Could you help me please? Thank you.

@hameedwafaAFG

Жыл бұрын

Good morning! If sometimes you got heat and sometimes it has no heat %99 it’s your timer that needs to be replaced ✌️

So my fuse definitely the issue, but the wire that attaches to it is also unusable. How do I get a new wire? All the ones I see to replace are only like 2inches in length

What area do you service? In California ?

@hameedwafaAFG

Жыл бұрын

Sorry . I m in Canada 🇨🇦 Manitoba , Winnipeg 🥶

I checked continuety on all limits and element theres also current to element ,so im stuck as to what the problem is voltage is 240 ? Any ideas on this one

@hameedwafaAFG

6 ай бұрын

Check your motor centrifugal switch .

Brother where can you buy the heater element thanks 🙏

@hameedwafaAFG

Жыл бұрын

From reliable parts or appliances parts places . ✌️

my dryer gets hot and runs normally for a couple weeks. then stops getting hot for a couple weeks. what problem do I have? no I haven't tested the fuse or heat element yet

@hameedwafaAFG

11 ай бұрын

I would say most likely it’s %10000 your timer 😁

@yanks250125

11 ай бұрын

@@hameedwafaAFG would that also be the reason that my dryer doesn't turn off sometimes?

@hameedwafaAFG

11 ай бұрын

@@yanks250125 yes because it’s not advancing