Used this same video to guide me for my R1. Saved me from being ripped off from a mechanic. All it needed was some WD-40 which is the UKs equivalent for a de greaser.
@donwheelie4430
4 жыл бұрын
there is wd40 in usa
@kallen2119
Жыл бұрын
try using 556 next time wd 40 is not the best in this case
@HowlerBikeVlogs5 жыл бұрын
if you check shops that sell a lot of motocross gear you can find a cable lubing device, it bolts on to the end of the cable tube, and then there's a small hole in the tool where you can put the straw of a wd-40 can or something similar. super easy and you can spray oil in way faster. cheap tool and i've used many a time.
@zsavoirhodnett26457 жыл бұрын
Lol great video, really hope this works for my bike!
@JimmieNapalm2 жыл бұрын
Thanks on the video, fixed my problem.
@myrealestateventure77026 жыл бұрын
great video thank you bro
@WalterPine2 жыл бұрын
Thanks bro it worked!
@robertgrant0082 жыл бұрын
Thanks dude 👍👍
@dennisbracknell826 жыл бұрын
Of course I bought Andrews bike and this problem just happened again and I’ve been trying to find videos to fix it and who but the previous owner of my bike made the fucking video!
@dennisbracknell82
6 жыл бұрын
Let see if it works Andrew
@kallen2119 Жыл бұрын
im not able to get that snap sound when mounting it back and it the metal casings doesnt really snap back perfectly on the handlebars... Any tips?
@Jaimeortegafitness2 жыл бұрын
I did this but now my throttle rolls forward
@kennethmathurin82445 жыл бұрын
Just did this and was able to get my throttle to snap again but When closing the throttle /rolling forward ..does the throttle suppose to feel loose ?
@vishalvasanthakumar1161
3 жыл бұрын
Try checking the free play.
@Jaimeortegafitness
2 жыл бұрын
My throttle rolls forward now
@robertgrant008
2 жыл бұрын
It’s needs adjustment which is even easier loosen the 8m -and 10 nut on the cable and adjust.
@LeeSeoungSu5 жыл бұрын
Good VID Thx
@fluff65383 жыл бұрын
prob gunna need a pair of socks !
@jayfizzle57217 жыл бұрын
Didn't work. All the oil just spilled everywhere. Maybe I will try again. Yamaha 2013 R6
Пікірлер: 22
Used this same video to guide me for my R1. Saved me from being ripped off from a mechanic. All it needed was some WD-40 which is the UKs equivalent for a de greaser.
@donwheelie4430
4 жыл бұрын
there is wd40 in usa
@kallen2119
Жыл бұрын
try using 556 next time wd 40 is not the best in this case
if you check shops that sell a lot of motocross gear you can find a cable lubing device, it bolts on to the end of the cable tube, and then there's a small hole in the tool where you can put the straw of a wd-40 can or something similar. super easy and you can spray oil in way faster. cheap tool and i've used many a time.
Lol great video, really hope this works for my bike!
Thanks on the video, fixed my problem.
great video thank you bro
Thanks bro it worked!
Thanks dude 👍👍
Of course I bought Andrews bike and this problem just happened again and I’ve been trying to find videos to fix it and who but the previous owner of my bike made the fucking video!
@dennisbracknell82
6 жыл бұрын
Let see if it works Andrew
im not able to get that snap sound when mounting it back and it the metal casings doesnt really snap back perfectly on the handlebars... Any tips?
I did this but now my throttle rolls forward
Just did this and was able to get my throttle to snap again but When closing the throttle /rolling forward ..does the throttle suppose to feel loose ?
@vishalvasanthakumar1161
3 жыл бұрын
Try checking the free play.
@Jaimeortegafitness
2 жыл бұрын
My throttle rolls forward now
@robertgrant008
2 жыл бұрын
It’s needs adjustment which is even easier loosen the 8m -and 10 nut on the cable and adjust.
Good VID Thx
prob gunna need a pair of socks !
Didn't work. All the oil just spilled everywhere. Maybe I will try again. Yamaha 2013 R6
Could I use wd-40?
@LCodGamingX
4 жыл бұрын
I wouldn't recommend.