*We've re-invented the e-scooter - learn more here* : kzread.info/dron/tmD1vbIETmNfVTxZtaxkfA.html *See the Pure Electric Lifestyle* instagram.com/ridepureelectric/

@piktch1617

Жыл бұрын

😮😮

The tires for this bad boy were engineered in the fiery pits of hell in order to torture any poor soul who attempts a tire change.

@swede_in_manila

3 жыл бұрын

LOL! So very true. Next time will be easier using this guide though

@aleksanderprzytua

3 жыл бұрын

shit, i pop rear inner tube last week, go trough hell while changing it, and yesterday i poped front inner tube and I'm to terryfied to even attempt to change it...

@drugard2820

3 жыл бұрын

@@aleksanderprzytua been stuck on changing front will since last week, cus no valve can fit in, until I saw this vid

@Alexpur817

2 жыл бұрын

@@drugard2820 you should try tubeless tires. Cheap and easy. All you have to do is boil them and they aren’t too bad to get on. I’ve replaced both rear tires on mine. About to do the front tire. Will update on how that goes haha

@cristean

Жыл бұрын

Amin.

Oh Boy I changed the tyre last week without seeing this video, 3h of really painfully work… but your video is a game changer thanks so much for sharing it’s just brilliant! Greets from Austria

@RidePureElectric

3 жыл бұрын

Great to hear!

@mwubi

Жыл бұрын

gegen ende so um 11:57 schraubt er da wirklich einfach nur rein? Denn diese spalte ist mit dem jump cut plötzlich weg. Sollte man das richtig rein drücken oder wirklich einfach rein schrauben? kannste mir da helfen und verstehst du meine frage :D

They need to start makin these tyres alot easier to fix punctures without having to watch videos hopefully they will make it as easy as fixing a peddle bike puncture great video any way

@Numbers0123

5 ай бұрын

Only Brillian world engineers think at customers perspective and make things better way than all other idiots ! RIP it's design engineer !

You can change the tire without removing the motor lol I've done it 5 times now. However, seeing the exposed motor is definitely cool :) The clamping technique is a big help. I discovered this when putting a new tire on as it kept slipping off the rim at a different place (because it was new and slick), this will save you at least 30 minutes. BTW, inflate to 40-50psi or you WILL get pinch flats (that's why I had to do this so many times).

@princematters7348

9 ай бұрын

True

@zakos5649

7 ай бұрын

What psi that do you use ?For my 10 inch tubeless i use 35 psi i am 78 kg its feel like its has suspension :p 50 psi its fell awful

I did this with wrench, allen key and only 3 screwdrivers + an unholy prayer to all damned gods, a lot of screaming and pain....boy what a time....

Made the whole process so clear. But also made me realize that unlike bikes, these guys arent really made to be replaced outside the workshop. You can only bring so much with you. So better grab a ride home and repair it there. Thinking of changing the front to honeycomb airless tires.

Thanks, I've just follow your steps and succeed to change front tyre with no mistake. Greetings from Serbia!

thanks very much for a straight forward explanation. Did my first tyre and tube change in under two hours, no swearing, no bleeding.

This is got to be the best video out there for scooter tyre replacement. Nice work @Pure Electric

Amazing video. Managed it with a few different tools but followed your directions. Saved so much effort in changing the tube. Thanks.

Oh my goodness. I finally made it after a few days of trying. The lubricant liquid is the key to put the tire back. Thanks for the video!

You're an absolute legend for this. The akimbo mole grip combo is the only real way to do this. Bookmarked, liked, loved.

Superb and in depth video! Helped me a lot dealing with the fron tire replacement. Took me about an hour to replace it with a run-flat one, and assemble it back.

Excellent. I have looked at several videos on this subject, and this is by far the best.

@RidePureElectric

3 жыл бұрын

Wow, thanks!

THANK YOU! The technique to remove the engine and the clamps to remove the tire really made the whole process easier. If I'd seen this movie before I started it would have saved me a LOT of time.

Thank you ! After 2 inner tube punctured because of the valve, i tried your method successfully. I didnt thought of removing the motor but that changed everything! I know i'll be quicker next time now. And i had some one handed bar clamp (wolfcraft, the one you use when you do woodwork) so i tried with those and it worked !

@aron2015

6 ай бұрын

Yeah I have same problem with valve. It goes bent and when you need to out air in, it's impossible the. Gets a puncture because valve being moved to much. I think I will by airless even though it's heavier and will get less miles.

Thank you so much for all your tips , especially the vice grips. Done in under an hour, my husband couldnt believe i fixed it my self after he tried for 3 days

Finally I found a film showing how to change the tire on front wheel! Thanks!

Exactly excellent, best presentation about I see recently: clear, clean and most important knowledge what is doing (experience) plus easy to follow. Thanks.

Oh man, thank you! The clamping method did the trick, awesome! I was struggling trying to juggle three pry tools, trying to keep the first part of the tire inside, but it kept slipping out while I was working on the second half to no avail. Thank you so much! :)))

@TheUncleBong

3 жыл бұрын

Use 3 zip ties instead of clamps and cut them after tire is on and pull them out.

@RidePureElectric

3 жыл бұрын

Glad it helped!

@multipreach2674

2 жыл бұрын

@@TheUncleBong nice tip.

Wow very nice demo. I am thinking 3 days how to replace the inner tube for my e scooter. Now I find it the way 🙏🙏🙏 thanks a lot for your demo brother....

Excellent tutorial,however I would recommend leaving the nut on the axle or at least protecting the axle threads if intending to hit the axle with a hammer,

Wow, thanks for showing this. It's so much harder compared to changing a bicycle tire!

Changing the tire on my hover one journey, was the most difficult tire change I've ever done in my entire 37 years of life. It was ridiculous, hilarious, and super frustrating all the same time. There's a pro tip when changing the back tire, put the disc brake on the side away from you. I cut the shit out of my hands on that thing. 🤣🤣🤣

thank you so much for the video. great to learn how to remove the motor from the wheel first, before replacing tyre. Very annoyed that Xiaomi scooters get punctured very easily, even just riding in city sidewalks!

Very good. Helped a lot. I was about to go and talk in person with the developer of this stupid hard wheel change but now I saved myself a ticket to China.

Excellent Tutorial , I can now wear that badge of honour 😊 Many thanks.

@RidePureElectric

3 жыл бұрын

Thanks Andy and congratulations!

Now I know why the dealer for my scooter ( kaboo skywalker 8s )sells tyres with motor as single part . Also same deal with front wheel. Should say is solid.

great video, I put my tire in the oven at 60 degrees celcius before putting it back on to make it smooth and flexible. Like that it is so much easier to mount it. I also never removed the motor as it was no needed for me. I use wood clamps for gluing to hold the tire tight. Smart to put the valve first , that was always a struggle for me and I even used a drill to make the hole a bit bigger.

Thank you so much for teaching me how to do this.

@RidePureElectric

3 жыл бұрын

No problem at all, glad we could help Kevin!

Great tutorial. Simple, explaining all details. Great job 🔥

@RidePureElectric

3 жыл бұрын

Thanks! Glad it could help!

Excellent video! many thanks! I ride on public streets and these skinny tires don't hold up as well as a bicycle, it seems they go flat after hitting breaks in the asphalt. thanks again!

Thank you so much! This video is very detailed not like the others.

The very best by far, utterly brilliant step by step.

Great Video. The tip on using vice-grips to give the tire more room at the opposite end for the tire levers was brilliant and probably saved me hours of frustration. I didn't need to remove the motor to get the tube out, although the valve was definitely more awkward, but not impossible.

This is amazing. The technique described during the seventh minute makes the process super-easy. I wish I knew it earlier.

@RidePureElectric

3 жыл бұрын

Great to hear!

@RabbyCalicdan

2 жыл бұрын

lmao

@Nakutnyi

2 жыл бұрын

@@RabbyCalicdan why?

I'm 4min into the video and I'm already drained of energy to even bother How hard can it be to make a small tyre a lot easier to change?

@voodoochile7581

2 жыл бұрын

It is easy. The small size makes it harder but in practice it’s not.

The best inner tube/tyre replacement guide. ❤️👍

@RidePureElectric

3 жыл бұрын

Thanks Steve! Glad it helped!

Перфектно! Благодаря за видеото, много ми помогна!

great video man. but i think this is not for everyone. dude this is really a hard work. I'm suprised how hard is that to change the tyres. 😨

This is a fantastic and easy to follow guide. There are so many little tips that make the job easier. I would not have figured this out on my own. Thank you.

@RidePureElectric

3 жыл бұрын

You're very welcome! Great to hear!

The Best tutorial so far !! THANK YOU !!

Brilliant explanation. Thanks

Habt Ihr prima hinbekommen. Sieht nach viel Arbeit aus. Habe ich heute Abend ja meinen Spaß.

holy shit so much work for a puncture fix, I'm going to invest in anti puncture tires instead for my Xiomi Pro 2.

Just followed these instructions but instead of Mole Grips or pipe wrenches i got some Magnusson Ratchet clamps, they've got plastic pads with rubber covers so there's no need to tape and they hold really well. Took just about an hour to change the tube and i did very little scracthing to the front wheel compared to before i saw this video and i replaced the rear wheel tube which is scratched to all hell and the bead of the tyre got some damage too. Many thanks for this video

Thanks! After replacing the rear tire, thanks to your instructions, I now understand why they ask so much money in the repair shop.

Bro God bless you for this vid

Excellent video was a huge help changing the front tyre and tube, it only took me 3 hours lol 😅

Thanks a lot! This was really helpful.

That trick with the mile grips just saved my life!

Thank you for ideas. Replasment is easy now :)

Thanks for the tutorial. If this is your first time changing tire, trust me, it will be hard :) I followed the steps and it went just right. But I have changed tires and tubes many times on other vehicles so I knew what to expect. Take your time. Use the pliers! And it will be okay. Use some soap to make the de/installation easier. Also, don't forget to apply some sealant between the motor and the rim itself. A little bit of silicone is okay. Clean the old adhesive/sealant.

I haven't been able to plug it in for days as I have only 1 pipe wrench. The problem was solved when I realized that I missed a very critical information. I had to tighten the piece of tire I tightened with the pipe wrench very well and push it towards the innermost part of the tire. It was also very good to lubricate the tire with vaseline.

Thanks, this will be handy for me in the future . Top tips.

@RidePureElectric

3 жыл бұрын

No problem 👍 Glad it helped!

Great video dave.

@RidePureElectric

3 жыл бұрын

Thanks 👍

Thanks a lot for your great explaining.

Nasty little job, I've changed low profile car tyres in less time and man did I sweat doing this, haha. I really should have watched a few of these and got the tips before hand, I struggled with no grips had to use brute force and got the tyre nice and warm first.

top class video you make that look very easy the videos are very handy .

This is a way better method for doing this. Most people just do the zip ties but the pliers seem to be a much better option than just zip ties alone. Cheers!

Life saver 😊 Many thanks.

At last, someone who knows what he is doing when changing a tyre! Only thing I would do different is to inflate the tyre before refitting the wheel, just in case there is a problem holding air. So many people get this wrong, so it good to have a proper video to point other scooter riders to when they have a tyre to change and are finding it 'impossible'.

@RidePureElectric

3 жыл бұрын

Good to hear you found the video useful Nicholas! Are the any other electric scooter maintenance videos you think we should do next?

@nicholasbrus8628

3 жыл бұрын

@@RidePureElectric Not in any particular order... How about disc brake pads replacement and proper brake adjustment including correct pad clearance. Proper adjustment of stem latch. Lubrication of moving parts such as brake cable, stem latch, kick stand, etc. Finding proper tyre pressure and checking it regularly. Applying FW updates where applicable. Safety checks users should carry out before each ride. How to clean your scooter properly as most are not waterproof, so don't want to use a hose or too much water on it. How to deal with bolts/screws with damaged/badly made heads that make removal difficult (I had to replace the new bolts on my rear wheel on M365 as they were poorly made of soft aluminium and the hex rounded out on first try). For most simple scooters that pretty much covers it as you already covered the most popular topic of tyre change in this video and it was one that frustrated me until I figured it out for myself.

@RidePureElectric

3 жыл бұрын

Thanks for the feedback Nicholas! Some of those video's are already in the works, so hopefully you'll see them on the channel soon.

9:02 This method is useless becasue the RIM grinds against the tube here in the process of putting it inside the tyre. I've repeated this process **3 times** and all 3 times I've gotten the tube punctured - *brand new tubes btw*. 27£ wasted on a method that ensures that the tyres become useless rubber. This method does not work. *DO NOT TRY*

@nerajoks1022

2 жыл бұрын

yeah I was thinking the same thing. this seems like a guarantee for puncturing the tube

Really good explained!

I'm not sure what's wrong with me but every single time I've tried to put on an air filled tube I've popped it. I've gone through 5 whole tubes. Every single time I've tried, I have popped the tube with the tire spoons. The amount of force required to get the last edge of the tire on is insane. I don't know how it's humanly possible to apply that much force delicately enough not to pop the tire but great enough to lever the last part over. What a frustrating mess. I have to replace my solid tire with another solid tire because yet again, I'm unable to get the spare tubes on, even with as much preparation and as amazing of a guide that I've watched. Sigh...

Nice video very well explained

Great video very well detailed thank you

Thanx this saved my ride 🙏🏼

Thanks for this video, now i know how painful it is to do xiaomi tires.

@RidePureElectric

3 жыл бұрын

Haha, glad we could be of service. It's a tricky tyre to change, but not impossible once you know how.

@teddturner

3 жыл бұрын

Nontheless very useful, i'll definitely save this video for the future. Thanks!

Toke me 3 hours to remove the inner tube and put a new one. This Job is 1000X harder than what it looks. Make sure you you have plenty of tools and time before starting!

By far the best video on the subject. Wish I had stumbled directly onto this one instead of the 10 others that did not do the job properly - resulting in alot of wasted time and cursing. 10/10.

Thank you my man 💙🙏

@RidePureElectric

3 жыл бұрын

🙌

Big help, thank you- although the spoons worked for me! 😁

Thank u, great job

Great video. Thanks for sharing.

@RidePureElectric

3 жыл бұрын

Thanks for watching!

Thanks for the information 😁

Why would you remove the stator(one part of the motor) from the rotor? seems to me like it only adds a bunch of unessecary work since it's not in the way of the tyre and tube. you also risk damaging the sensitive motor parts with the magnets hitting or scratching the sides when removing/installing. Am I missing something? I'm not a scooter expert, actually just got my first one recently. But I have a lot of experience in electronics and mechanical engineering.

@martinzhang5533

2 жыл бұрын

If you try this youself you'll understand. it is basically impossible to put the front tube valve in the hole with the motor in there also the hole is on the side of the wire so it makes working on it super weird

@TheBozn

2 жыл бұрын

@@martinzhang5533 Since my comment I have changed both the front and rear tube on my scooter. You can press out the valve through the tyre with your fingers. If it's hard to get it through the hole you can guide it out with a small screwdriver or something similar from the outside. These hub motors are designed to have the tyre and tube changed without disassemby of the hub, you know. I think it's important that people know because these motors are more sensitive than people think. It might not break right away, but little shavings from scratching while assembling can greatly reduce the life span of the motor.

Thanks a lot for great tutorial. It saved me a lot of time and nerves. One idea: Use some lubricant on tire while putting it back.

Very good video. Greetings from Austria

🤦🏾‍♂️ I’ve taken my scooter to Halfords and now from watching this video, it a piece of cake to do. Wish I watched this video before taking my scooter to halford for the same issue , but thanks pure electric

Thanks good guide

Best video ever 👍🏻 Greetings from germany :)

To repair a puncture that may happen within 1000km's, having to need to disassemble the motor is unbelievable! It is a nightmare! Settling off on board and returning by walking or public transport and all this crazy steps to repair it are something I can not afford another time. My scooter has gone and this adventure has come to the end.

Excellent! thanks

they get easier the more you do , i use a pair of clamps now and it work great

Thanks bro!

well done top video 👍

@RidePureElectric

3 жыл бұрын

Thanks for the comment Daniel and glad you enjoyed it!

I managed to change the inner tube without taking off the motor. And yes you badly need 3 vice grips to help you better. The rear tire is even more the hardest. Next time before even buying an escooter, I'll pick the airless tire to avoid so much hassle. Highly recommend recommended.

This vid made it relatively easy to change the tyre...I say relatively easy in the concept of easy the tyre itself was a nightmare to put back on well in my case had all the tools ..just the tyre was spawned from the arse of the devil resulting in me losing my shit with it multiple times before I managed to get it back on but managed it needless to say the video was really good and very informative to the process of changing the tyre

After seeing this I am ready to repair my Escooter

Thanks to your guide I managed to replace it without any problems. Good job 👏

Very good video. Thank you :)

@RidePureElectric

3 жыл бұрын

Our pleasure!

Thank you for totrial👍👈

And this is why you go with solid tyres.

THANK YOU ❤️

I really admired how you played it smarter and not harder. Great video my friend!

@RidePureElectric

2 жыл бұрын

Glad you enjoyed it

it was useful and acurate

Don't forget to put the washers back on both sides of the fork

Thanks