Shows how long you have been planning this channel, it has only been around for a few months but had content for at least 2 years backed up

@Mrcaffinebean

2 жыл бұрын

But as a boat owner I can attest it’s possible to have this many problems this quickly 😂

@robbiesuru4589

2 жыл бұрын

@@Mrcaffinebean surf boat owner here can confirm

@VenturiLife

2 жыл бұрын

@@Mrcaffinebean BOAT - Break Out Another Ten-Thousand.

@dillanmistry

2 жыл бұрын

True attention to detail

@678friedbed

2 жыл бұрын

is this ChrisFix?

Boat's and holes do not mix!

@Straight_White_Fatherly_Figure

2 жыл бұрын

Had no idea this was done 2 years ago! Great planning on your end!

@chrisfished

2 жыл бұрын

They definitely do not!

@Josher126

2 жыл бұрын

Remove the L in "holes" and remove "not" and we got a good summer party

@Straight_White_Fatherly_Figure

2 жыл бұрын

@@Josher126 🤌🍑 😏

@Tylnorton

2 жыл бұрын

@@Josher126 Let's be step bros then lol

Honestly I don’t have a boat but I really enjoy seeing you fix anything. It brings me a lot of joy. Thank you.

@chrisfished

2 жыл бұрын

Glad you enjoy it!

@ChuckThree

2 жыл бұрын

@@chrisfished Can’t wait until we get an auction boat rebuild series 😜

@ClayRepairs

2 жыл бұрын

yeah, same here. I know nothing about boats, but I'd watch Chris do just about anything 😁

@Kspiker

Жыл бұрын

❤

Not a fishing fan but a boat fan but most of all a chrisfix fan :)) congrats on the 2 years test, goes to show the level of planning! Stay safe!

@chrisfished

2 жыл бұрын

Thanks!

I love the fact you did an update on the boat 2 years later after the repair, love the dedication to your videos!

@chrisfished

2 жыл бұрын

Thanks man! I like to prove that what you see actually works!

@chrislizon7483

2 жыл бұрын

@@chrisfished I'm impressed you managed to sit on the footage that long....

11:32 I didn't expect that. The amount of dedication you put in your videos is insane. Even though I don't have a boat and I'm not planning getting one, I still enjoy every video of yours. Great job Chris!

@chrisfished

2 жыл бұрын

Thanks a lot!!!

ChrisFish is a man of focus, commitment and sheer will. He once tested a repair for 2 years before uploading the video.

A 12 minute video, 2 years in the making. That's some serious dedication. Thank you Chris.

I wasn’t expecting you to jump a whole two years later, thank you for another great video!

@chrisfished

2 жыл бұрын

Thanks!

That's dedication right there! Not only showing proof after 2 years of repair but also showing step by step what to do for the fix. Well done Chris!

@chrisfished

2 жыл бұрын

Thanks a lot

I never realised the deep knowledge and skills you have with cars would translate into marine work. It's palpable you've got a logic and skillset that's transferable across multiple industries. Really impressive, Chris.

@chrisfished

2 жыл бұрын

Thanks a lot Arron!

i thought you only fix cars man you’re all rounder good luck buddy

I watch your videos of things I will never ever do. Fill a whole in a boat I imagine is something that 90% of your viewers will never do, yet we watch anyway because you're the best. KZread is a magical thing .

@chrisfished

2 жыл бұрын

Thanks David and you never know!

@davidhawkins452

2 жыл бұрын

@@chrisfished Very true ! And did I really spell it "whole".. I must have spelled that under wodder.

That “2 years later” part was so unexpected and increased my respect for this video and added a lot of credibility to what you did. I don’t even have a boat though 😁

@chrisfished

2 жыл бұрын

Thanks a lot! You might not have a boat but you can still apply the concept to other stuff.

This guy gives the best and most complete and accurate descriptions of how to do a job and how to do it properly. Are used to watch his works without automobiles, but this description on dealing with below waterline holes in a boat hole is excellent. He handles factors that most of the other videos on the same subject completely skip. He uses accurate words and grammar in all cases, making it difficult to misunderstand what he’s trying to get across. I’m subscribing.

Your dedication is unreal. Thank you for everything you do!

@chrisfished

2 жыл бұрын

I try to give you guys the best info and proof I can!

Great video Chris! Always packed full of actually useful information without ever being boring

@chrisfished

2 жыл бұрын

Thanks a lot Conner! That is always the goal and I am glad to hear that!

Gonna be another great video, have a great weekend Chris, and looking forward to even more content,

@chrisfished

2 жыл бұрын

Thanks a lot!

It's funny that you shot this 2 years ago because I thought you sounded a bit subdued. Ngl that was the perfect amount of enthusiasm and energy though

Let me correct, some mistaken words in my comment: This guy Chris gives the best and most complete and accurate descriptions of how to do a job and how to do it properly. I used to watch his work with automobiles, but this description on dealing with below waterline holes in a boat hull is excellent. He handles factors that most of the other videos on the same subject completely skip. He uses accurate words and grammar in all cases, making it difficult to misunderstand what he’s trying to get across. I’m subscribing.

@chrisfished

Жыл бұрын

Thanks a lot!

I'm not only impressed with the repair (and of course your instructional video) but I'm also impressed you kept the footage for 2 years in order to make this for us! I have had to do some minor repairs like this myself and never knew to do the bevels... great tips!

@chrisfished

2 жыл бұрын

Thanks Dave! Glad you were able to pick up a new tip! Nothing better than learning something new!

Great repair job Chris! Boat = Break Out Another Thousand. LOL But the maintenance/repairs won't cost you too much because you do them yourself. Years ago I did plenty of work on a Chris Craft 292 Catalina.

@chrisfished

2 жыл бұрын

Thanks a lot man and exactly. Having a mechanic do this would easily be $1000 for this simple repair. It’s tough bc the boat isn’t in my driveway so I need to be smart with what I bring.

@electronicsNmore

2 жыл бұрын

@@chrisfished Definitely not easy when you don't have easy access to all your tools. Nothing worse than driving 20-30 minutes away and discovering you forgot or need another tool you have at home. Been there done that. LOL Keep up the great videos!

@chrisfished

2 жыл бұрын

Exactly! Turns a simple project into a hassle haha. Thanks man!

@electronicsNmore

2 жыл бұрын

@@chrisfished BTW, love the boat.

@chrisfished

2 жыл бұрын

I’ll do a “review”/ overview of the boat this summer. It’s pretty awesome for it’s size

The fact that this man just said yea imma let this sit for 2 years and make sure its right! 😌 quality.. astonishing quality to craft

@chrisfished

2 жыл бұрын

Thanks a lot!

I just love the way that he explains things and shows how to do stuff, even tho its not cars I still love to watch it

@chrisfished

Жыл бұрын

Awesome!

The two years later was one of the best twists i have seen in a video in a long time

@chrisfished

2 жыл бұрын

Haha I was working on this for a long time to prove it’s a solid repair!

Those close up shots, that explanation about bevel, you really put so much efforts into your videos! Absolute delight to watch your videos just like always ! :)

@chrisfished

2 жыл бұрын

Thanks a lot man!

Chris's sound is nothing less than a therapy to me. 😊 Thanks matey. cheers

@chrisfished

2 жыл бұрын

Thanks!

I’ve been watching Chris sounding dull like hey there Chris fix here to ahoy there Chris fish here ! Dudes a true legend in teaching people how to take care of their whip whether be on the road or in the waters !

@chrisfished

2 жыл бұрын

Thanks for the ongoing support!

Great and educational video Chris !!! Keep up the good work ! ❤️💪

@chrisfished

2 жыл бұрын

Thanks!

Man your channel developed my interest in Fishing 🎣 ♥️

@chrisfished

2 жыл бұрын

That's what I like to hear!

I’m so glad this is you. I was about to roast somebody for copying your other channel. Thanks for the content

@chrisfished

2 жыл бұрын

Haha thanks!

i’m not a huge sea fan but i’m gonna watch everything just because it’s chris and I bet it’s going to be fun

@chrisfished

2 жыл бұрын

I'm glad you'll still be watching!

Me hoping I never have to fix a hole in my boat, but watching anyway because I know I’m going to learn some good stuff!

@chrisfished

2 жыл бұрын

I'm glad you're still watching! And hopefully no one ever has to!

You never cease to amaze me man.

@chrisfished

2 жыл бұрын

Thanks!

I just learned today about chrisfish… what the heck!?Been watching the Chrisfix channel for years and now I gotta catch up on this one!

You teach me so good that I was able my dad's car. Thanks Chris 😀

I love that “Ahoy there!” Keep it up man! How’s the driftstang?

@chrisfished

2 жыл бұрын

Thanks a lot! And stay tuned for this season ;)

Great video man,keep it up

@chrisfished

2 жыл бұрын

Thanks!

I don't own a boat, heck I don't even own a fishing rod, but I'll definitely be subscribing to this channel.

@chrisfished

2 жыл бұрын

Welcome aboard!

this just goes to show how good your brand is, kudos chris, I think you should run for POTUS

@chrisfished

2 жыл бұрын

Thanks!

I love this dude even if it’s fishing or cars

@chrisfished

2 жыл бұрын

Thanks for the support on both!

Great tips as always!! You are awesome Chris 😁

@chrisfished

2 жыл бұрын

Thanks a lot!

@JesusisLOVEJohn-

2 жыл бұрын

Your pfp is hilarious, Virtuous of the Signal.😂

@Straight_White_Fatherly_Figure

2 жыл бұрын

@@JesusisLOVEJohn- hahaha, thank you 😈

Gosh, a 2 year video. CF is really taking it to the next level.

@chrisfished

2 жыл бұрын

Have to show it actually works!

The dedication man 2 years!!!

@chrisfished

2 жыл бұрын

I like to prove my repairs work

Very good video. I had no idea you had a plan for Chris Fish 2 years ago!

@chrisfished

2 жыл бұрын

Yeah. Covid really messed up a lot of stuff for me

That time skip at the end was surprising. Great work!

@chrisfished

2 жыл бұрын

Thanks!

Please bring back more ChrisFish content, as a fellow boat owner these videos are super helpful and informative!

Wasn't sure I was gonna be into this channel but I honestly love it! After 5 years of following you, you never cease to maintain my interest and teach me something new and cool! Good on you man and thank you so much!

@chrisfished

2 жыл бұрын

I'm glad you love the new channel! Thanks a lot!

Very good video Chris! I'll just say it's reccomended to not use the fist few squeeze of the self mixing epoxy as if one component came out faster at fist you won't have the right ratio of epoxy

@chrisfished

2 жыл бұрын

Good call! Luckily this is a 1:1 ratio so it should mix perfectly even from the start but it’s not worth the risk. For now on I’ll def be using your tip!

I couldn't believe you planned this for two years. You are an absolute legend! P.S.: when you make the video of the instalation of the new transducer, please explain what it is :)

@chrisfished

2 жыл бұрын

I’m not sure when but it’s currently being edited.

2 years is a lot for a tutorial wow keep it up

Mate, you need more of this stuff. As someone in another video suggested, a basic how-to of boat DIY would be amazing.

I feel like this channel is just an excuse to get Chris to say "water" more times.

@chrisfished

2 жыл бұрын

Haha

I cannot believe this! I found out this 2nd channel of yours a week ago and I have a hole that I need to fix in my Boat and was looking for good videos.. *NO WAY dude* Thank you so much for this! Be safe.

@chrisfished

2 жыл бұрын

I read your mind :p Thanks a lot!

I absolutely love your main channel! I'm so happy this one popped up on my recommended page!

@chrisfished

2 жыл бұрын

Thanks a lot man!

I go fishing, and these videos are really helpful whenever I get my boat in the future. Thanks chris!

@chrisfished

2 жыл бұрын

That’s awesome! Glad to hear the videos will be helpful!

That 2 year jump hit me like a truck

this video just shows how long he's been working on this channel for

@chrisfished

2 жыл бұрын

Lot of work behind the scenes to get it up and running properly, still have much more to come!

@KeaganExtremeGaming

2 жыл бұрын

@@chrisfished I wonder what the original launch video was supposed to be

@justinunger38

2 жыл бұрын

@@chrisfished You can actually use regular fiber glass to repair the wholes

That's where my Milwaukee and drill bit case went! Same set I use at work! Nice video! I work on vehicles and my brother works on boats, so both your channels help!

@chrisfished

2 жыл бұрын

Haha thanks man!

Chris is da man. Another quality video.

Bro plz show how to paint a boat

@chrisfished

2 жыл бұрын

Thanks for the video idea!

ChrisFix Chrisfish edition😂

Absolutely love that you got this hull. One of my bucket list boats they were hardcore tuna boats for decades in my homeport near Boston. My neighbor bought an original "Moonie" boat and its amazing. Love these hulls. Enjoy the ride and keep that diesel happy. I would highly recommend putting in a drive shower to keep that duo prop housing nice and cool.

@chrisfished

Жыл бұрын

Thanks a lot and same man! This boat is a battle wagon and it has a shower on the drive now luckily!

Even though I don’t have a boat, I love to watch these videos. Not only are they educational but they are very entertaining!!

@chrisfished

2 жыл бұрын

Thanks and glad to hear that!

"Fill this whole " That's what she said.

Some flex tape will do just fine 😅

@chrisfished

2 жыл бұрын

That could be a fun test!

You are very educated. Knowledge is power. Like always Chris awesome video.

@chrisfished

2 жыл бұрын

Thanks a lot Patrick!

I really love this channel, Chris!

I’m secund cuh

@chrisfished

2 жыл бұрын

nice!

First

@chrisfished

2 жыл бұрын

Winner winner chicken dinner! Email or DM me your mailing address for some ChrisFish swag!

I cannot wait to get more videos like these, i personally use some of your chrisfix car videos on my car :) and I was suprised when i saw you planned this video for over 2 years

@chrisfished

2 жыл бұрын

Much more to come!

AWESOME VIDEO!!! Just what I needed!! Thanks!

how to jack up my boat? i have a jack and stands but how? disclaimer: this is a joke

@chrisfished

2 жыл бұрын

lol it's actually kinda difficult to do at home. They do it with a travel lift.

I was so excited when i saw this new channel of yours, and only thing i can say it's not a letdown!!

@chrisfished

2 жыл бұрын

Thanks Max!

Just subscribed! I’m loving what your doing and can’t wait to see more.

@chrisfished

2 жыл бұрын

Thanks a lot

!! The dril backwards is a mega tip!!

I like how you waited to show the proof. Shows how much you actually care. Nice work man!

@chrisfished

2 жыл бұрын

I pretend I’m watching the video to learn myself. If someone showed it lasted two years and 4000 miles on the water I’d trust it more haha

What blows my mind is that a guy with 8 mill subs and pretty busy life still finds time to reply to many of his comments, even on his main channel. I have been watching Your vids for like 6-7 years now and i remember you replied to me a few times on one of your videos with more than a million views and thats just mind blowing comparing to majority of other youtubers who never in their life reply absolutely anything. Well done Chris, we all appreciate your effort.

@chrisfished

2 жыл бұрын

I spend about 4hrs every day going through comments trying to answer questions people have because I think that is important to helping people learn!

@idontcare7961

2 жыл бұрын

@@chrisfished Impressive. Thats what i call dedication and you are right, it does help a lot to get answer to certain questions that you cant just easily find online.

Great tutorial, very informative and to the point!

@chrisfished

Жыл бұрын

Glad it was helpful!

Excellent content. Perfect speed and level of detail, so much harder to make something like this than it looks! I already kind of knew how to do this, but this added a couple of really useful tips. Ironically it has given me the confidence to drill a hole in my bilge while on the hard stand to allow incidental fresh water to drain out during the monsoons. I'm away from the boat for 6 months, so even a new small leak during that time could fill it up and ruin it!

@chrisfished

Жыл бұрын

Thanks a lot and I can see why that would help during monsoons!

Chris fix fixing boats is the best thing ❤️

You blew me away with the 2y later segment. Dude...this is sick!

@chrisfished

2 жыл бұрын

I like to prove my work is quality and will work.

You've spent so much time and energy and put so much effort into this video and at the end it didn't get almost any views. This is so sad. I wish this doesn't discourage you and you keep making good videos like this one.

@chrisfished

2 жыл бұрын

It's actually doing pretty well, and I'm not going anywhere anytime soon!

@aleks_ivanov

2 жыл бұрын

@@chrisfished I'm glad to hear that

chris is a jack of all trades he really does it all

Hi. You like drifting, fishing, boating, and cars! All the things a like wow!

Love it Chris. Well done

@chrisfished

2 жыл бұрын

Thanks!

Great 👍 videos as always, each video shows how knowledgeable you are at cars and boats. Keep up the effort and I look forward to seeing the next uploads.

@chrisfished

2 жыл бұрын

Thanks a lot

u are a youtube legend man, keep it up i have no car no boat not even a drill and i am watching ur videos it is just what Netflix really miss

@chrisfished

2 жыл бұрын

Thank you!

The way you work that drill bit in and out of that hole 🥸

Much love and respect for all your content you put out it's so amazing seeing you truly test things and your videos are so easy to follow and full of knowledge thank you so much for teaching me and I'm sure Tom's of others all the amazing stuff you know keep up the great work

@chrisfished

2 жыл бұрын

Thanks a lot!

I don’t know how I got here but I watched to the end. I like seeing people who are skilled in their craft, and you are a fantastic teacher. !!

@chrisfished

2 жыл бұрын

Thanks a lot man!

I think I love this channel more than chrisfix........everytime I learn something absolutely new........ specially watching videos like this which took 2 years in the making.....Chrisfish is addictive!!!

@chrisfished

2 жыл бұрын

I'm glad you find these videos addicting!

Hahahahahahahaha... man I was wondering why we barely get ChrisFix videos anymore and I happened to see this. AHOY there! Awesome.

@chrisfished

2 жыл бұрын

Thanks! Make sure you have your notifications tuned on because I got a lot more videos on the way very shortly!

Dude I love this content. I have been following boating repair videos recently and don’t have a boat and only large water in some rivers near me. So all I’m saying is keep it up I just turned on notifications cause I love this stuff. You should buy and old boat and show a full restoration!

@chrisfished

2 жыл бұрын

Thanks for the idea and thanks a lot!

Yaaay newww video, love your work and you chrisss

@chrisfished

2 жыл бұрын

Thanks a lot!

@chrisfished

2 жыл бұрын

Thanks a lot

You the man Chris! Keep up the great vids brotha💯🎣

@chrisfished

2 жыл бұрын

Thanks! Will do!

WHY AM I JUST FINDING THIS CHANNEL? Been subbed to Chris Fix for years now I love this!

@chrisfished

2 жыл бұрын

Haha it’s still in the early stages so you have only a little catching up! Thanks a lot man!

Wow, nice tutorial for beginners =D

Nice video! Don’t know much about boats but very informative. I have been waiting very patiently for a Chris fix video👍

@chrisfished

2 жыл бұрын

Yeah man same. I haven’t been able to film bc the bad weather. It’s so stressful! I just want to make videos lol

@jz601

2 жыл бұрын

No problem I need to flush my transmission on our 2019 GMC Sierra but I’m hesitating because I don’t want to mess nothing up

Just watching these videos makes me wanna buy a boat even if it isn't the greatest thing out and just fix it up

@chrisfished

2 жыл бұрын

You can get a project boat for mad cheap, even free because marine fixes are so expensive if you have someone else do it.