How to fit an induction kit
Hello guys!! Today I'm using my mate Matts car to show you all how to fit a induction kit from a standard filter. I have broken this down to simple steps so it's easy to follow for those who have no idea. This was based on a 2013 Fiesta , like I said it varies depending on car and model but they are all near enough the same set up. Hope this helps you all with your own set up!
If there's any thing you guys want to know and want me to do a video on leave a comment below, thanks!
Don't forget to SUBSCRIBE , LIKE , COMMENT AND SHARE!!!!!!
Follow my pages below------
Facebook - / teamtitanperformance
Instagram - / bf_jbdsjxad
Пікірлер: 36
Very simply demonstrated and easy to follow steps, thanks a bunch for the video mate, I really appreciate it! Thank you
Really well explained! Should mention cars that may have sensors
Good video 👍
does the aspiration pipe need to be clamped as well at both ends or does it just squeeze on to the original pipes?
Hi mate where exactly did you mount the bracket ? I couldn’t see properly
what did u do with the mass airflow sensor??
Hey bro do u have the link to that induction kit for that fiesta
Do u have a link to buy this induction kit?
Does it make any difference if the cone is fitted without a pipe?
How is the engine after using a cheap filter? I doubt it would "filter" much.
You should have done a before and after to show the difference in sound
@robzmodz1733
5 жыл бұрын
Ronnie Johnstone yes I know mate very sorry for not doing that if I do another one I will make sure to do that.
Have you also exhaust system or not ?
Link available?
did you reinstall the mass air flow sensor on the open air intake kit?
@robzmodz1733
4 жыл бұрын
Yoel Siagian this model does not have one mate
@segers887
4 жыл бұрын
@@robzmodz1733 every car needs a mass airflow sensor i never seen a car without one it might be build in the Air intake manifold it self
@garethpryce1592
3 жыл бұрын
@@segers887 I’m trying to work out if mine has one or not because I can’t see it like all the other fiestas
@helpspecialists9238
3 жыл бұрын
@@garethpryce1592 mine doesnt either ..
exhoust is orjinal ? Or How system
Hi, was there any engine warning light or any other issues after driving it around after installing the air intake ?
@wuhanvirus8964
2 жыл бұрын
Yup, obd tested results ”system too lean” any clu
Mine has the map sensor what do I do with mine is 2011
@jamesgoolge2812
3 жыл бұрын
Did you sort it? Have you got the whole thing if so where did you get it from
It doesn’t need air filter after putting on the kit?
@brado2558
2 жыл бұрын
The kit has a filter. The cone is the filter
I don’t understand where to put my maf sensor
Where’s the maf sensor go mate I didn’t see you put one in because you’ll blow your car up with out it
@klaud764
3 жыл бұрын
the maf sensor is after the throttle housing
LOL 😆 no Air Mass Sensor back in place that Zetec S (1.6, or the 1.0ltr Turbo version) or ST's nothing but fault code light and as engine has no sensor to pick up air flow wait MOT emissions issues. Otherwise all good - always get kit with a fitting for MAF.
Just got that for a fiver on Amazon! 🤣
Where did you get this?
@robzmodz1733
5 жыл бұрын
OllyFK you can get this from eBay mate
Why would you do this on the side of the road though
aaaand where is induction?