This was by far the most professional well explained video I've seen. Thanks so much, life saver, mate. I'm gonna use your instructions to change my syphon around, give my toilet the lofe it needs. Straight to the point, no faffing around

@DoItAllDan

3 ай бұрын

Thank you 🙏🏻

Many thanks Dan, clear and concise instructions and a great recommendation to use the Dudley Turbo Syphon, works a treat.

Thanks so much for this video. Well explained and to the point. Just fitted my new siphon and fixed our toilet.

Well worth paying the extra for the excellent Dudley Turbo Syphon, as it is very straightforward for an amateur like myself to fit. This video just helps to give you more confidence to do things in the right order. Thank you Dan for the brilliant video, clearly explained.

@davidrichardson4283

Жыл бұрын

Which way does black washer go on as one side is smooth other side ridges.

Excellent, short, sharp useful, clear, easy too follow

Many thanks for a very helpful video! I've just bought one of the Dudley's to replace the flush over a Saniflo macerator toilet. The toilet itself was non working for ten years (the 'official' agent charged us £60 to replace the ball float which was nothing to do with the faulty toilet) but I finally managed to repair it with a new condensor and rubber gasket after watching yet another KZread video (not a pleasant job). I suspected the syphon was wearing out after the ten year holiday as the toilet pump starts up on its own a couple of times each day probably due to a slight leakage into the bowl triggering the pressure sensor, now the flush is only working on and off so its time to replace in the next day or two. This will be a great help as the toilet (fitted by social services for Dad) is incredibly tight to get at but once this is fitted - no more major jobs!

@DoItAllDan

4 жыл бұрын

Glad it helped thanks for h The support

Thank you very much for a most helpful video showing me step-by-step, in detail, how it is done. Much appreciated!! I like to see how things work and this is both fun & informative.

@DoItAllDan

4 жыл бұрын

Glad u enjoyed the video and it helped 😁👍🏻

Completely fabulous as others have said straight to the point and now we have a working loo again. Thank you so much.

Great video mate, just changed mine by following your instructions. Very easy to follow 👍

very easy to follow makes it look simple, that new flusher looks well worth the money.. nice video ....

Legend mate, replced this easy using your video. Much appreciated

Im going to fit one tomorrow ,following your instructions .

Great video, very informative!

Great video, thanks

Great job 👏

Brilliant vid mate 👍🏼

Yes! legend, doing that in the morning :-)

Thank you, Dan. I had the same issue. Followed your steps and now the toilet is back in use. I wouldn't of had a clue if it wasn't for your video. Thank you so much

@DoItAllDan

3 жыл бұрын

Glad it helped 😁

Hi Been scanning the net for help on my toilet that won’t flush. Without doubt this was the best by far. Really clear great camera work. Well done keep them coming

@DoItAllDan

4 жыл бұрын

thanks for the support I appreciate it 😃👍🏻

Brilliant video Dan, really helpful, thanks!

@DoItAllDan

2 жыл бұрын

Glad it helped ✌🏻

Brilliant. Not only is it an identical toilet but you are also wearing the same T-shirt as me as well! - Ha! Anyway, thank you so much for this. Here we go!

@keithytube

2 жыл бұрын

I DID IT! Thank you big fella. Your video gave me the confidence to give this a go - thanks again. Sure enough the diaphram was split and I managed to repair it and it worked. I will replace the whole thing in the future (when funds allow!). Cheers

Straight to the point , no life stories, great vid , cheers

@DoItAllDan

3 жыл бұрын

Thank you for the support 👍🏻

Great vid, helped me loads fixing our toilet, just wished KZread was out back in the day, would have saved me time and money✌️

@DoItAllDan

4 жыл бұрын

Haha your not wrong there mate

Thanks for this video. I discovered that I already had one of these syphons so all I had to do was buy and replace the diaphragm. So cheap and quick. No taking off the cistern which would’ve made the job impossible for me, as I am not very strong. Thank you.

@DoItAllDan

4 жыл бұрын

Gaynor Mcmanus glad it helped 😁😁👌🏻

Just used this to fit a new siphon - I'm bloody useless at DIY but this is so clear you can't go wrong. Thanks mate, keep up the good work! Btw I got one of those Dudley siphons - bloke in the plumbers' merchants also said it was worth spending a bit more to get one of these!

@DoItAllDan

3 жыл бұрын

Glad it helped thanks for the support 👍🏻

Used this today to help my mum. Top job, thanks!

@DoItAllDan

4 жыл бұрын

Good man thanks for the support 👍🏻

Many thanks - this video has saved me getting a plumber. Quality description of how to replace cistern

@DoItAllDan

3 жыл бұрын

Glad it helped 👍🏻

Great video Thankyou

Thank you, just the information I needed, I'm off to get a close coupling kit and do a proper job.

@DoItAllDan

4 жыл бұрын

Good man 💪🏻👌🏻

Glad your using dudley turbo 88s I’m not a plumber but when I’m older I want to be a plumber when I’m older but I have a shed of toilets that’s I’m still working on you should check it out !

Brilliant video showing how to put the syphon washer inside not outside as the instructions! Thanks

Thank You. You safe my life 😉

Thanks, a handy video featuring the flush unit I was planning to buy for my first attempt at changing a siphon. One wrinkle: after disconnecting the cistern it refused to lift off the pan. Some googling revealed that it may be held down with silicone mastic and wiggling the cistern to and fro was required to free it. I installed the new flush without mastic, as recommended in the instructions supplied with the unit, and it's still watertight after several hours. (I also fitted new fibre washers on the inlet pipe.) How else to spend a wet May bank holiday?

very nice you do your job with only necessary talking, that is excellent

Such a help for us wannabe plumbers. Cheers.

Thks mate

Awesome!!...can't get a plumber because of the covid outbreak...so I'm going in!! 👩‍🔧 ...thanks for the help 😋

@DoItAllDan

4 жыл бұрын

Go for it let me know how you get on 👍🏻

Very good video. Just wish mine was as clean! Minging job!

@DoItAllDan

3 жыл бұрын

Haha never easy though 😂👍🏻

Great video, thanks. I used it yesterday when replacing our toilet siphon as it was not working properly. We actually got a Fluidmaster Ultra for lever operated as it was the only one at Wickes. I was fine fitting it but I’m stumped by how to set it or if I’ve set it correctly. You can adjust a couple of parts to do with water height and overflow height etc but I’m confused and not sure what to do despite reading the instructions I’m none the wiser. It seems to flush ok, however the handle is quite loose. When I tighten the nut inside the cistern it sticks, so have to leave it a little loose. Any tips on how you set the siphon I mentioned and how to sort the handle issue would be fantastic! Thanks again for the video

Absolutely brilliant video thank you so much - me and the husband managed to fix our loo and we are pretty proud of ourselves too! Great step-by-step instructions thank you

Just completed this. Your video is a good tutorial, but I experienced a couple of problems. First one was that my float arm caught on the new syphon side - so I had to heat bend it to an S shape. Second was a leak on the feed entry joint - I've had this before when reflacing a feed system - I managed to solve it using a rubber o ring washer instead of fibre washer - it sqeezed up tighter to make a better seal. These tasks are always straightforward till something goes wrong! Cheers again.

@DoItAllDan

4 жыл бұрын

Glad u managed to sort everything, thanks you for the comment and support 👍🏻

Im not only buying the dudley turbo, but I've subscribed to Dan's channel. This dude knows how to explain technical stuff in a very clear and concise manner that he should run an apprenticeship programme for youngsters. Thank you so much Dan. What happened to the Doughnut washer after all?

@DoItAllDan

2 ай бұрын

Thank you for your support 😁😁, I really appreciate it !!! Doughnut was fine 👌🏻

Dan, thank you so much. Your video was by far the best I found, so clearly explained. I fixed my non-flushing toilet within an hour, no problem. Cheers.

@DoItAllDan

4 жыл бұрын

No problem Karen, thank you for the support👍🏻

Good video. Just wanted to ask the plugs on the syphon i have no idea which one to remove or to keep on whether to keep the top one on or the bottom one on. If i just leave both on and fit the syphon in can i remove one of the plugs at a later time whilst water is already in the cisturn? Thanks in advance

Great advice, thank you. I was undecided about the close coupling kit but no convinced. I shall use a piece of hose pipe to syphon the water into a bucket. Unfortunately, I do not have a local stop valve so I shall turn off at the mains. I hope the job is as easy as you made it look. Cheers.

@DoItAllDan

3 жыл бұрын

Fingers crossed for you and thank you for the support 👍

@poppasogers

3 жыл бұрын

@@DoItAllDan I haven't stripped it down yet however, I am trying to establish the outlet diameter so that I can buy the syphon unit before I start. The toilet is 1986 vintage, the base of the syphon appears to be about 2" outside diameter, I cannot get to the actual outlet yet and I do not want to strip it down until I have all the parts. Is the outlet size a standard of 2" or 1.5", what would you advise please?

@poppasogers

3 жыл бұрын

Completed the replacement, excellent advice Dan. I changed the close coupler, could only purchase a plastic version and I was thicker than the steel one fitted. The old seal was in a poor state so the change was worth it. It did give me a challenge with the back fixing because the plastic coupler and new seal ment the hole fixings did not quite line up. Small problem but all sorted. Very pleased with help from Dan.

Thanks

Thanks for this video.. I'm going in! Need to buy some adjustable grips first though, what size would I be looking for for this job?

@DoItAllDan

4 жыл бұрын

Just come crescent pump grips make sure they are PUMP 👍🏻

Very helpful.

@DoItAllDan

3 жыл бұрын

Glad it helped 👍🏻

How do we work oput what size of dudley siphon to use - is it about the height of the cistern or do they come in different hole sizes?

My old siphon has a 2" outlet, but these Dudley Turbo Duoflush 88 only seem to come with 1.5" outlets. Do you know if it would still work?

Thank you xx

@DoItAllDan

4 жыл бұрын

Thank you for the support ❤️👍🏻

my blue fill nozzle drips quite loudly, does this need replaced or is it a float issue? i will shortly be removing the loo for a tiler and think I will renew the internals while its off, was that dudley the adjustable model? saw lots of pin holes down the side just

Really good video mate , no corners cut! Hate videos with loads of quick editing "do this do that bang job done" , you can't follow them!

@DoItAllDan

3 жыл бұрын

Thanks for the support 👍🏻

whats the water catcher thing called? my rod hook thing cracked so the hook is just loose now, idk if i should replace the whole siphon or just that.

Excellent video mate! Is that the same Dudley DuoFlush as I installed a couple of years ago? It's the most counterintuitive siphon you can imagine: to get a short, eco flush, you hold the handle down for ages, whereas for a normal, water-intensive flush, you just give the handle the usual short pull. As a result, no one ever uses the short flush, because it takes more effort, and you're never quite sure when you're supposed to let go of the handle! LOL. Madness.

@DoItAllDan

4 жыл бұрын

Hahaha they are very awkward in some cases and most people only use the one flush anyway 😂 Thanks for the support and comments

Great video. I am a complete plumbing novice but was able to change my knackered siphon which, as Dan suggested, had a knackered diaphragm. Only problem is now I have a slight drip from the vertical inlet. Any ideas how i can rectify this? Cheers.

@DoItAllDan

4 жыл бұрын

Hi samcon, do you mean you have a leak from the feed entry point? It will depend on the connection if you have a washer I would recommend replacing that also dismantling and adding some paste will help Thanks

Great video. My wife's flush system was leaking, so followed your instructions I changed it. Now my wife is like new and happy with the new tight diaphragm. But the problem is that she said that she is going to change my toilet cistern lever for the new and young one. I don't know what to do now... LOL))))

@DoItAllDan

3 жыл бұрын

😂😂 Tickled me quite a bit that did 🤣

How do i make internal overflow work? Remove yellow peg?

Just followed your instructions in my downstairs loo. Went perfectly, even for a ham-fisted novice like me! Lots of brownie points now for the rest of the bank holiday weekend. Many thanks 😀

How do you know what size dudley to get

I agree with all the positive comments - a good video! In my cistern the float arm catches on a small blue tab that sticks out of the Turbo blue body section. I can't see what this blue tab does other than prevent the float arm from dropping fully down and make the refill slow. Can I just cut it off?

@DoItAllDan

3 жыл бұрын

I'm not too sure which tab you mean, there is a red and clear one on the air breaks and the small push tabs that represent the litres in the cistern. take a good look over then instructions and make sure 👍🏻

Very informative, the thing is I have my cistern almost 7’ from the floor and about 18” from the ceiling so not much room to work with. Making things more awkward the cistern is a 40 + years old ‘Shires’ unit which contains asbestos everything other than the syphon works fine including the mains feed & overflow pipe. What do you suggest other than calling in an expensive hazmat plumbing team? BTW I live in a council house.

@DoItAllDan

10 ай бұрын

Very difficult to say without looking, however they were made to be repaired. If you have any doubts always use a professional 👌🏻

Good video - a slight different approach to the donut washer compared to other videos - placing it on the pan rather than the locking nut under the cistern. I guess the end result is the same?

@DoItAllDan

3 жыл бұрын

You have to be careful I use both methods to be honest with you but for the purpose of the video I did it this way, it's a safer bet to attach it to the cistern if your not used to them 👍🏻

Can you tell me where the problem lies, when the flush handle won't return more than half way, after flushing. I have to lift it to the top position, before it will flush.--I lubricated all moving parts, Thanks.

Is there an internal overflow system (where you cant have pipe to the outside) and will water continue to flow after flushing?

@DoItAllDan

4 жыл бұрын

internal overflow as standard however it shouldn't continue to overflow after flush 👍🏻

Thank you Dan. One question. I live un México and we dont have does type of flush... if your wc dont flush that much and its not obstruct, we need to buy a brand New wc, not to replace de system.. when I was in africa I se this really old wc but the flushing system was hydrsulic and did like a pumping, so your waste could go with out a problem. the one that you are showing does something like that. Thank in advance

@DoItAllDan

3 жыл бұрын

I think I see what u mean Carlos, with this particular siphon as the lever is pulled the plastic valve inside sucks the water in to refil and then plunges it into the toilet when released 👍🏻

Cheers Dan! Very clearly explained throughout.

Spot on. Thank you for making a middle-aged man's life easier and cheaper. Straightforward and easy to understand instruction.....now.... do you do bathroom fans....? :)

@DoItAllDan

5 жыл бұрын

No problem buzz, glad it helped. Bathroom fan as in extractor fans?

@buzzlight-ale6512

5 жыл бұрын

Yes. Extractor. If you've got a video for that I'll use and share that one too.

@DoItAllDan

5 жыл бұрын

I am planning on doing a video for an extractor, they are generally straight forward and only 3 wires. Live, switch live, neutral. Just remove the old front casing either held by a grub screw or a push insert and you will see the three wires, test them with a multimeter and isolate as required. Swap with a new unit and drill holes as required. Cut wires to suit new unit (should be marked which wire goes where, live, switch and neutral) and fit new cover/ test. If you are still struggling there should be a video on KZread but it's very easy to replace hope this helps Buzz. Thanks

@buzzlight-ale6512

5 жыл бұрын

Much appreciated. I'll look out for that video. In the meantime, thank you so much for your instruction again. Now bugger off and enjoy what's left of the bank holiday! :)

@DoItAllDan

5 жыл бұрын

😂💪🏻

Where the blue plastic part is where the water runs out into the tank, the white plastic threaded screw that shuts off the valve for the water can you replace them individually? Been trying to source that particular part but can't find it on its own!? Cheers

@DoItAllDan

3 жыл бұрын

Normally you will only be able to get a replacement cartridge, it just slots in. I haven't personally replaced individual parts before 👍🏻

Did this method but it leaked. Replaced the washer with some silicone sealant. No leaks! Otherwise it’s a great syphon! Cheers

Hi , do you know what the stroke of the 88 siphon is . i.e. how far does the lever lift the centre yellow plastic spindle?: Thanks

@DoItAllDan

3 жыл бұрын

It will depend on the cistern and will have to be adjusted 👍🏻

Screwfix sell the diaphragm membranes for Dudleys, simply pull the yellow pin out, remove flush hook, remove old plastic diaphragm and replace. Takes 3 mins. Easy.

The unit shown here has a TWO part fixing. 👀Some units have three parts (as one unit) 1. A large screw collar that secures the dome to the 2. main squarish unit PLUS 3. another screw collar that screws to the fixed down pipe within the cistern. Make sure you have the right one unit! ( Ideally remove, take to your supplier/retailer DIY et) 👀👍 Most are UNIVERSAL fixings BUT! ALWAYS make sure especially when ordering online etc

Nice video I can't take my water bowl off the wall, previous fitter put silicone all around it and the screw's are rotten. Been trying to take it off for last few days, no luck yet.

@DoItAllDan

2 жыл бұрын

Grab urself either a long hack saw blade and give it a go 👍🏻

Instructions weren't clear enough. Now I have a Italinox Prisma 16" Belt Conveyor Pizza Oven C/40 Natural Gas. With Free Stand. Thanks a lot.

@DoItAllDan

4 жыл бұрын

What?

@Tommorichards

4 жыл бұрын

@@DoItAllDan google "instructions unclear" meme. Overall, actually very helpful. Thanks man.

@DoItAllDan

4 жыл бұрын

Hahahahaha went straight over my head

Is there any way to change the syphon without taking it off the wall?

@DoItAllDan

6 ай бұрын

This particular one can just be twisted and replaced, most however have to be removed depending on which you have

If you have trouble fitting a blank -just put a slightly undersized O ring over the washer then fit.

Thanks. That looks easy enough but I did think it was a smaller job to replace the Dudley siphon. I couldn't bear to put that filthy rusty old thing back on the wall once I knew it looked like that.

@DoItAllDan

3 жыл бұрын

Down to customer in all aspects, you can lead a horse to water 👍🏻

@gortsearthblog9803

3 жыл бұрын

it should of been wire brushed at least

it's lucky the installer, did not use steel screws to attach the cistern to the wall, or it would have been a pain to remove rusted screws, a good plumber who has maintenance experience would use screws which do not rust ( stainless or brass ) if they care. and the thomas dudley turbo 88, has an internal overflow, great video, thanks.

👍👌 you'll be back to sort that out when the plate gives. 🤦‍♂️ some customers.

@DoItAllDan

5 жыл бұрын

Hahaha tell me about it, for the sake of £5 😂😂😂🤦🏻‍♂️

@phasedout6769

5 жыл бұрын

@@DoItAllDan Yeah silly really because it's not £5 next time, labour plus any extras. Morally you want to replace it anyway, but what the customer wants is what they want.

@DoItAllDan

5 жыл бұрын

Exactly, as you can imagine I got the usual 'ill cross that bridge when I come to it'. So who am I to argue 😂 the customer gets what they want not always what they deserve 😬

@phasedout6769

5 жыл бұрын

@@DoItAllDan 🤣 cant help some people. At least you got to film 👍

@DoItAllDan

5 жыл бұрын

Amen to that

Skylo syphon is sitting to high in cistern. When I flush it pushes up the cistern lid. Tried to lower via twisting lower but still too high. Help.

@DoItAllDan

2 жыл бұрын

It should come with manufacturers instructions?? If your cistern is too small your fairly limited

@shosho5306

2 жыл бұрын

@@DoItAllDan thanks. A plumber fitted it. I tried to adjust the height and it does lower however this then pulls the toilet handle down so that’s no use as then can’t use it like that. I think the cistern is very old and may be too small for the standard syphon. I may have to get plumber back out as may well need a whole new cistern.

Didn't need to purchase a new unit, just cut up some plastic bag and renewed the"flapper " seal. But thanks for the video.

Hi dan most plumbers i know always use sealent around the siphon washer and ptfe tape on the nuts to be absolutely leak proof would you recommend this.

@DoItAllDan

5 жыл бұрын

Not for me EK, I was always taught (and this is proof) 😂 you do not need to rely on sealant or ptfe. I wouldn't apply it to any new install by any means if I'm being honest. All new, should be fine with supplied washers etc if its new and leaks I would check for damage. 👌🏻👌🏻

@ek6868

5 жыл бұрын

@@DoItAllDan tanx👍

not to be a ass or anything but why did you not turn the isolation valve all the way??

Excellent video - the language simple and thorough. However the resemblance to Tommy Cooper "Just like That" cannot be avoided..! Apologies - a great job..!

@DoItAllDan

4 жыл бұрын

😂😂😂👍🏻

OK, great vid BUT! It should be made clear that you do NOT have to remove the unit from the wall to replace the siphon unit!! 👀NOT do you have to empty the unit completely. It is more than likely that the siphon unit NOT the inlet valve or ballcock et will need replacing ! 😶If you have a heavy ceramic unit believe me the last thing you want to end up doing is stripping it off the wall !! I've just replaced our siphon unit and yes the overall cost is about £20 all in BUT as said here, it is NOT worth compromising with a cheap unit. !! 👍Lastly, stay safe!

Great instruction video.....except for "go ahead" said too often

Very good thanks. Just one thing, only Americans “go ahead” before they do anything. I love our American friends, and I think they deserve their monopoly on that expression. You’re welco… (oops, sorry!)

I would never again buy these flush systems they only work for a short while before failing.

@DoItAllDan

2 жыл бұрын

Easy to replace 😅👍🏻