Thank you for the information, very well explained step by step what I was looking for because I want to do that project for my truck.

You broke it down perfect for me!!!💪🏿💪🏿💪🏿

@ContractorsPOV

4 жыл бұрын

Awesome, glad it helped!

Thank you for this you explained it so I can understand what you did I appreciate it

@ContractorsPOV

2 жыл бұрын

Glad it helped! Thanks for watching!

I so needed this video!!!! How much fiberglass/resin/hardener would recommend be purchased? How many layers?

@ContractorsPOV

4 жыл бұрын

We need up doing 4 layers , it doesn't hurt to go thicker. As far as the resin goes, I believe that we used 2 cans on each side of what I have linked. If you want to go with a gallon, it might be easier. Thanks for the comment 👍

What is the mounting depth of those subs?

@ContractorsPOV

4 жыл бұрын

4.75"

How much resin did you end up using on this build?

@ContractorsPOV

4 жыл бұрын

About 4 cans of the item listed in the description.

@DIYAudioGuy

4 жыл бұрын

So that's a 28.8 oz container. Not sure why Bondo doesn't give you a whole quart. I guess that means I need a gallon of resin.

Next time turn volume up

@cedricwilson2899

4 жыл бұрын

Great job though thanks

What size fiberglass did you use

@ContractorsPOV

4 жыл бұрын

I'm not exactly sure what size you are looking for but the exact fiberglass we used is linked in the description. If the links do not work, please let me know.

Any chance the measurements are available? I want to make one for the same truck

@ContractorsPOV

4 жыл бұрын

Which measurements would you be needing?

@victorarroyo8809

4 жыл бұрын

the wood sections if possible

@ContractorsPOV

4 жыл бұрын

@@victorarroyo8809 that's what I thought, unfortunately, I didn't write them down and I no longer have the truck.

@victorarroyo8809

4 жыл бұрын

That’s fine, thank you!

Can't hear anything

What was the total cost of doing this project

@ContractorsPOV

3 жыл бұрын

With the subs, amps and fiberglass?

@drchris311

3 жыл бұрын

@@ContractorsPOV just in making the box

@ContractorsPOV

3 жыл бұрын

@@drchris311 I didn't pay attention to the cost at the time. Probably could have found something cheaper online. Materials: -1 sheet 3/4" MDF -2 resin kits -fiberglass fabric -Wood glue -4 to 6 can spray on bed liner -Misc. hardware

I’m lost on how the fiberglass gets attached to the wood.

@ContractorsPOV

Жыл бұрын

As you apply the resin to the fiberglass and wood it will become one piece. When the resin dries, it bonds with the wood and becomes a permanent bond. Does that help?

@olveramelinda

Жыл бұрын

@@ContractorsPOV Yes Thanks

How many fiberglass clothes I need to buy?

@ContractorsPOV

4 жыл бұрын

If you are doing the same vehicle, I would buy at least 20 packs, and take back what you don't use, better to have more than not enough.

@patanas100

4 жыл бұрын

Thank you so much you’re the best👍

Why is the audio so low on this video?

@ContractorsPOV

2 жыл бұрын

I didn't have a mic at the time. Definitely wish I could do it over.

Can’t even hear the commentary

By far the worst fiberglass job I have ever seen in my whole entire life, and I am sorry to tell you this, but it’s the truth. Bro, you did not need the plastic. All you had to do is spray some mold, epoxy cast remover over the tape, so that the fiberglass would come off the tape easily.

@ContractorsPOV

Жыл бұрын

That's good to know. We did this quite a while ago and it was our very first one. We didn't know that mold epoxy cast remover even existed. Plus, as you can tell, it was done on the cheap anyway. It was more for the video experience that anything. If I ever do another one, I will know better, I appreciate the feedback.

@raytonwhite4187

Жыл бұрын

@@ContractorsPOV I forgot to put, the end result was superb. You did a great job. It came out looking beautiful.