Very talented man. Awesome stuff.

Might get this done in my next car...I'll be back soon Neil 😎

Thank you! I always hold on to large cardboard/packing boxes to cut up for bench protectors😎

Frumos lucrat…. Succes in continuare🙏😀👏

Nice tutorial. Appreciated.

Interesting method. I would have done it differently. I would have taped off the car part before adding the wood.

Cool info dude. You shoud use more tags for this 👌👍

The door card🤣🤣🤣

Waffle is actually good - the corrugations actually make the fiberglass stronger. 🤣

Do you have a list of everything you used?

looks really good. how do you calculate the volume for speaker application?

@creativecarsounds4484

6 ай бұрын

Hi zigwil, the easiest way is to tip it on its back and fill with water, then measure the volume, you could also try to break the enclosure up into shapes internally and work out their individual volumes but the water trick is much easier

Awesome video dude, im planning on doing a vary similar build, could you tell us how many m² of fiberglass did you use? Also how many liters of resin. Thanks!

@creativecarsounds4484

10 ай бұрын

Hi there, in all honesty it depends on how thick you make the walls of the box, a minimum of 4 layers is a nice solid wall so I would estimate I've used about 6m x 1 m on this build and as to the resin you will need at least 5 litres of resin for this, basically the more the better, thanks for the comment and watching the video.

@tasos-v

10 ай бұрын

@@creativecarsounds4484 cheers mate! I'm done with the build, used around 4m² and 5L of resin, used more in the blanket stage than anticipated, you were a great inspiration! Please upload more fiberglass boxes!

How does it attach to the car

How do you connect to car??

How do you pin the box to the side of the car so it doesn't move when taking hard turns? Great video and amazing work. I hope to do the same some day

@creativecarsounds4484

10 ай бұрын

Hi Carlo, as the box is in the location to access the light cluster in this car I would always advice using good quality Velcro on the back of the box to give some grip, as the box fits snug inside the boot shape it will hold fast but can be removed if required.

How did u screw the base in place from the bottom?

@creativecarsounds4484

Жыл бұрын

Hi bowezz, its screwed to the lip of the oem trim the the fibreglass bonds the new box and base together, then unscrew from oem trim

Hey, can you suggest me like I followed all the procedure and my front is also made up of MDF wood still there is no bass coming out even after 5 layers. Please suggest something for this

@creativecarsounds4484

5 ай бұрын

Hi there, that does sound odd, what amp and sub are you using as to get no bass at all means something is wrong with the wiring, even a sub not in a box produces some bass

but how do you know the sub has the proper box space?? its all guessing?

@creativecarsounds4484

Ай бұрын

Hi, the easiest way to check the volume is to fill it with water, check my video on the lexus sub install and you’ll see the method

How much do you normally charge for a box like that

@creativecarsounds4484

7 ай бұрын

Hi, thanks for the comment, it really comes down to what you want built and what equipment is being used, the heavier the bass the more material and therefore more cost, usually the boxes don’t come cheaper then around £400 but they do get a lot more expensive than that

Wrapping the factory panel behind the enclosure with the same carpet would high the fact the the 2 don't match.

@creativecarsounds4484

Жыл бұрын

Hi slap happy, very true, it looks worse on the camera then in real life and customer was happy with how it looked, so thats all that matters to me 😊

hello factories to sell?

@creativecarsounds4484

Жыл бұрын

Hi Ivan, Would be nice but spending every day building the same thing would be very boring for me

Dude loves to talk. jfc

Looks expensive

@creativecarsounds4484

Жыл бұрын

Hi Darrell, depends on your budget but as you can see from the work its a lot of labour to build

Good job. But please stop saying "obviously" all the time. If something is obvious, you needn't say so. Because it's obvious.

@creativecarsounds4484

6 ай бұрын

I’ll try to do better, obviously I’m grateful for the feedback 😆