How To Fiberglass Door Panels - Step By Step - Box Chevy Caprice - ALLKANDY WET WET / HOUSE OF KOLOR
Автокөліктер мен көлік құралдары
Please watch my latest video here: "LS Swapped Box Chevy Caprice On 26s Build After Paint & Cut N Buff - Reinstalling Everything Back On"
• LS Swapped Box Chevy C...
-~-
Visit : spraywaycustoms.com/ for New & Used Spray Guns & Parts
Complete step by step process of fiberglassing Box Chevy Caprice custom door panels spraying House Of Kolor Kandy Voodoo Violet with Orion Silver as the Base Coat. I used the Wet Wet Plus / ALLKandy.com for my clear. I'm going with Kicker 6.5 in the door panels with a Chevy bowtie. Any questions feel free to ask....SprayWayCustoms
#CANDYPAINT #SPRAYWAYCUSTOMS #HOWTOFIBERGLASS
Base Coat: House Of Kolor - Orion Silver
Kandy Coat: House Of Kolor - Voodoo Violet
Clear Coat: ALLKANDY - Wet Wet Plus
Primer - Harbor Freight Gun
Base Coat - Satajet 3000 HVLP 1.3 tip
Kandy Coat - Satajet 3000 HVLP 1.3 tip
Clear Coat - Satajet 3000 B RP 1.3 tip
You can use the same process to:
fiberglass dash
fiberglass speaker box / sub box
fiberglass rear deck
fiberglass center console
fiberglass tweeter / speaker pods
fiberglass kick panels
fiberglass pillars
fiberglass bumper
fiberglass spoiler
fiberglass hood scoop
Endless possibilities
Пікірлер: 4 200
Here's A Video Of Fiberglass Supplies To Get When Fiberglassing kzread.info/dash/bejne/paSrmKSAgMfQkso.html
@user-cu2ix2cs5b
Жыл бұрын
너도 다음은
@mikelliteras397
8 ай бұрын
Same here
Oh man, YOU ARE A GENIOUS, I know this is 5 years old, but how can a masterpiece like this ever becomes old! Thank you, maybe you don't know it but your videos and your humble attitude and hard work is an inspiration to many of us that are struggling and trying to find ourselves in this crazy world. I embrace you man you are a truly special person. Semper Fi
@SprayWayCustoms
4 жыл бұрын
Thanks man. You all are my inspiration as well
@rickspearman344
3 жыл бұрын
Thats a real talent you Have
@bryangoit2052
Жыл бұрын
Cool dude for sure.
After 15 minutes of watching I was thinking "what the crap is going on here." Then went to end to see the results, and then I went back and watched the entire video. Man this thing is awesome.
@SprayWayCustoms
5 жыл бұрын
Craig Cole 🤣🤣🤣thanks
Okay first off can someone please give this guy a sponsorship!! Did you all just watch this video and see what he did in his garage by himself bare-bones as hell with products from Walmart!! This shit turned out a thousand times better than 99% of the stuff I've seen on KZread!! And he doesn't feel his video with a whole bunch of nonsensical blabbering and then yells and not knowing what he's talkin about or anything he's straight-to-the-point its in-depth and gives you everything you need as far as information so you can do this on your own!! This is the best video by far that I have seen in all my years of watching videos like this on KZread!! Somebody please give this man some major credit because he deserves it!! Great job bro turned out really amazing!! You spent more money on the paint supplies from House of Color then you did on everything to make the door panels LMFAO I love that shit!! Showing love from Milwaukee Wisconsin 414!!
@SprayWayCustoms
Жыл бұрын
Thanks for the big support
Why do I chuckle every time he calls us 'youtube' 😂
@SprayWayCustoms
4 жыл бұрын
🤣🤣🤣
@dennisbernal91z28f1
3 жыл бұрын
Same
@kirkdonnelly3547
Жыл бұрын
I was thinking the same thing 🤣🤣
@buildingusa9604
Жыл бұрын
Me too 😜🤪😜🤪😝
@713peka
10 ай бұрын
Relatable
I couldn't take that repetitive music. You do great work... I just couldn't watch the video due to the music.
@SprayWayCustoms
Жыл бұрын
Thanks for trying 😂
at the beginning of video I was thinking "wtf u doin?" the end result is amazing.Talent
@WelcomeToMyDream
6 жыл бұрын
yeah man I'm glad I stayed with this dude because it came out right as hell. Serious talent.
@TheAnomaly0
6 жыл бұрын
Exactly what I thought too. "No way this will ever look good. This is going to be some shit that he'll be the only one that thinks it looks good". I learned my lesson.
@nikkielynn6018
6 жыл бұрын
Exactly what I was thinking ... I was looking mighty foolish at the end.
@dreamingrightnow1174
5 жыл бұрын
Right? Me too.
@tonyfoxxbuilds1920
4 жыл бұрын
When I saw him putting resin on the carpet I was thinking the same thing. But great results!
What amazes me is that he does it all with one hand so that he can show us the way. Hats off to you SprayWay! 💪🏾👍🏾
@SprayWayCustoms
4 жыл бұрын
Thanks for the support
I just wanted to say, Thank you! About 3-3 1/2 years ago I watched your video. I commented that I was installing air ride and a system in a Chevy HHR. I had never attempted to try anything like this You commented back. I respected you took the time to reply. That inspired me...I can do this!! I thought??? Now, to why I say Thank You! Little over 3 years now I went from a single car garage. To now a 10,000 sq. ft. shop. I learned fiberglass from your inspiration. From there taught my self how to weld and metal fab. Now building custom choppers and mini choppers. Thank You!
@SprayWayCustoms
2 жыл бұрын
Congrats Patrick 🤝Thanks for the support
love your videos but that loop in the background.....damn!! SHHHHHHHH!!!!!!
@SprayWayCustoms
8 жыл бұрын
Thanks Scott....
@scottking912
8 жыл бұрын
Thank YOU!! Really inspiring me to give it a shot. Pry start small. Hopefully it turns out, lol.
@TheMakyato
7 жыл бұрын
hi man i like your spirit always positive but tell as how the panel fit on the door
@carlosjackson8498
6 жыл бұрын
Scott King thanks
@janburgess9830
6 жыл бұрын
I love the instructions. But drop the ur gonna love me crap. The loop drives me crazy.
You are a master craftsman and a great teacher. I am sure people don't realize how much time and effort this takes. I dunno what you charge for a job like that, but it isn't enough! This style isn't my jam, but the ideas and the quality of work are very impressive. I'm going to do some dash and door panel work and I got some great ideas here to try on small pieces and work it out. Thanks.
@SprayWayCustoms
3 жыл бұрын
Thanks for the support
No one better on KZread with the door panel, dash and center console glass work. It’s just amazing
Bro I’m still watching these videos from five years ago man. God bless you bro taught me so much.
@SprayWayCustoms
2 жыл бұрын
Thanks for the support Bruce
I’m so impressed how this turned out. You started with a junk yard door panel and now it is a custom kandy work of art bro. Thanks for sharing the knowledge.
@SprayWayCustoms
6 жыл бұрын
Thanks for supporting Chris
@chaseisaac9563
5 жыл бұрын
@@SprayWayCustoms Hey bro did you teach yourself to paint and do interior work
@SprayWayCustoms
5 жыл бұрын
I went to trade school back in 1997 for Autobody And Paint but I learned more from watching KZread. I didn't start back fooling around with it until 2014
@chaseisaac9563
5 жыл бұрын
@@SprayWayCustoms you are nice and natural at what you do you and stitch by slick outta North Carolina are amazing keep up the good work I am inspired by you guys.
love the turn out keep up the good work the only annoying part of this video is hearing "your gona love me" over and over for 1Hour :06 Min :24 Sec :p
@robgagnon3847
6 жыл бұрын
Amazing work but that song was annoying
@danielleyva7881
5 жыл бұрын
Ughhh that loop is so annoying. Good work tho!!!👍
@paulleech6412
5 жыл бұрын
Aw man, y'all must not know bout Jennifer Holliday. I could listen to that loop all day and still feel it "And I am telling you I'm not going" Love it SprayWay
I admit it was taking me a minute to grasp what the end result was going to look like when you was about midway through. About 2 minutes later I started seeing it, I also seen how much work that it was gonna take as well. LoL. You stuck with it dude and didn't give up. You kept pushing forward and implementing new ideas on the way. Well you did it and dam knocked it out of the park! Great job man and keep following that creative gift, no room anymore for self doubt about your abilities. That ship passed long before you even got the fiberglass. LoL. Cheers!
@SprayWayCustoms
3 жыл бұрын
Thanks for the great compliment Chad
I know these not new videos, but ive started my whole interior because of you.. Thanks for these videos!!!
@SprayWayCustoms
3 жыл бұрын
Thanks Darnel
BEAUTIFUL!! Nice work brother! I really appreciate your attention to detail and all the effort you put into showing us step by step! I know it's a hell of a lot easier to get it done without filming everything, so THANK YOU for sharing all of your work!! You're really talented!!!
@SprayWayCustoms
5 жыл бұрын
Thank you so much Levi Olive
You should make a video of how to fabricate your own middle console and fiberglass it. I'm sure you would come up with something amazing because your work is very good I like your videos you truly show step by step 👍
Hands down the best painting vid I've seen on YT! Just insane skills....
@SprayWayCustoms
3 жыл бұрын
Thanks Jesse
Been watching your videos. You have no idea how much people are learning from your series.
@SprayWayCustoms
2 жыл бұрын
Great to hear that Kyle
Wow! That was amazing! Sometimes even small custom parts cost a fortune, and you whip out this masterpiece like it was a piece of cake! Fine workmanship right there!
@SprayWayCustoms
5 жыл бұрын
Appreciate you motley416
I just found your channel. I like how you show all the steps and processes in the job, even when it looks all crazy and you make changes on the fly, it can turn out beautiful. Some people don't realize how much work it takes to make a custom part from scratch. I used to build carbon fiber airplanes and we built all the interiors by hand, its definitely a labor of love working with composites. You do awesome work!
@SprayWayCustoms
3 жыл бұрын
You're support is very much appreciated
I remember seeing this for the first time years ago, and im still blown away! You inspired me to experiment and get creative with my 92 Chevy silverado k2500. Thank you for sharing your knowledge with us as always man we appreciate it
@SprayWayCustoms
2 ай бұрын
That's awesome!
I remember when I first checked out your channel, never disappointed me. Salute!!!
@SprayWayCustoms
Жыл бұрын
Thanks a lot man
I've watched a lot of FG videos and this the only one that made me fully understand this thing. Bro you gifted. The end result is absolutely amazing. Keep it up bro.
@SprayWayCustoms
4 жыл бұрын
Thanks Kyle
Damn..this vid was like watching empire..just kept getting more interesting..even forwarded a couple calls just to finish watchin it..lot of essential step by step procedures easy to understand..u would make a good teacher bruh..305 need that work .
@SprayWayCustoms
6 жыл бұрын
I appreciate that love
I'm glad your doing this! Most hood dudes don't have the confidence to do anything but stand on a corner.
@SprayWayCustoms
3 жыл бұрын
Thanks for the support Matt
I think House of Kolor or other companies should be lucky to be sponsoring you. You do great work
@SprayWayCustoms
5 жыл бұрын
Thanks 🙏🏾 Dick Jokes And Bondo
Man, I swear, defund Hollywood and fund this kind'a stuff. Seriously.
@SprayWayCustoms
3 жыл бұрын
Thanks 🙏🏾
@manniefresh7354
3 жыл бұрын
Or hire these types of folk to work on set designs and stuff!
@rickspearman344
3 жыл бұрын
@@manniefresh7354 , Hollywood wants fast and cheap.....so I doubt he would fit their requirements.
Okay KZread
@quintoncameron4725
6 жыл бұрын
okay paco
@ericdouglas1359
6 жыл бұрын
you gonna love meeeeeeeeee!!!! yaaa!!! ugh uhh ugh uhh
Video is the best for a beginner to watch and learn like myself on KZread.
@SprayWayCustoms
3 жыл бұрын
Great. Thanks Rod
Bro your colder then a poplar bear toes nails. Just talent!!!! There's nothing like a trade. Keep up the good work
@SprayWayCustoms
5 жыл бұрын
Thanks David Butler
Nice work and you are inspiring others to try it. Good job!
Beautiful work! I like how you take the extra time to get everything perfect. I'm fixin to do my own door panels, and I've learned more from your videos than any others. Thanks for the detailed videos.
@SprayWayCustoms
5 жыл бұрын
Thanks for watching Wicked Evil Bass
You explain everything to a T. It’s really appreciated for us who are trying new diy projects. Thanks man !
@SprayWayCustoms
3 жыл бұрын
My pleasure...I really enjoy doing it
Man I’ve always hated the look of most custom fiberglass door panels/dashes on old schools but, now you’ve made me a true believer. Your concepts and execution are very inspiring!!!
We'd like to see it installed at the door.
@WelcomeToMyDream
6 жыл бұрын
was hoping to see it in the car for sure.. man I bet it looks good!
@esmokebaby
5 жыл бұрын
Right i said the same thing two year after you did
Watching again like it's my first time!!! And I still think this is the best thing ever, and the looped music hasn't bothered me once lol!!!
@SprayWayCustoms
4 жыл бұрын
Thanks A Day Wit Jay 1
@robfishingkingdavis5653
3 жыл бұрын
I promise this the second time I watched this video
@audisport222
3 жыл бұрын
Watchin for the second time too lol
Man I used to watch all those shows on discovery channel but who need all that when I can follow you and learn from the best Thanks for being you and the lessons
@SprayWayCustoms
3 жыл бұрын
No problem... thanks Rafael
I never thought of sampling in another cars door panel. That really changes things for me. Thanks for the walk through. It turned out really nice. I never thought pleats could look so good. I might try something like that in my truck! I appreciate you so much, thanks for sharing your experience.
@fr33ourminds
5 жыл бұрын
Quick question, did you try to find sample door panels that were a close fit to your door?
@SprayWayCustoms
5 жыл бұрын
Just the size. Thanks man
I fell asleep I've been watching all your vids and this song was haunting my sleep dear God please make it stop. other than that, you've got one helluva skill level man!
I’ve never seen that kind of painted door panel before. I’m blown away. You are so talented man.
@SprayWayCustoms
6 жыл бұрын
Thanks Scott. I really do appreciate you
Man. This is a pure work of art. Downright beautiful. You have some patience and skill.
@SprayWayCustoms
5 жыл бұрын
Very much appreciated Steve
@SteveMirabelli
5 жыл бұрын
@@SprayWayCustoms You deserve it man. Great work.
I watched the whole thing and still can’t believe how awesome it turned out. Great job
@SprayWayCustoms
3 жыл бұрын
Thanks for watching
Thank you for being yourself sir and keeping it 100. You're the best of the best in your category thank you for sharing the knowledge
@SprayWayCustoms
5 жыл бұрын
Thanks Rogerio. Very much appreciated
Hey man, this was a GREAT video, You inspired me to try this, keep posting.
He takes pride in his workmanship.
@SprayWayCustoms
4 жыл бұрын
Thanks Sam
You can tell from this man's demeanor he deserves respect and gives respect a man with a lot of patience...🏁🏁🏁
@SprayWayCustoms
Жыл бұрын
Thanks a lot
this had been a pleasure to watch great how to video my brother spraywaycustoms
@SprayWayCustoms
8 жыл бұрын
Thanks for the support bro
I gotta get that paint and color man. I was already thinking of going with a purple on my car, this color just sealed it for me. I'm definitely going with purple.
You definitely pay attention to the detail and your work reflects it. Awesome job!
@SprayWayCustoms
4 жыл бұрын
Thanks Jason
It's a joy to watch you work! Always amazed at how you can see it in your mind and then produce it! Gorgeous.
@SprayWayCustoms
3 жыл бұрын
Much appreciated
You made me a kandy fan! Now I want my car black and yellow in all kandy! Amazing job! You are an artist! That music on loop killed me. But how you went over everything step by step was worth watching. Going to start small and do a sub box build with Steelers incorporated into it. Kinda like the Chevy sign you did. Keep up the amazing work my friend.
@SprayWayCustoms
6 жыл бұрын
Thanks man....I'll make sure next time I don't loop the music..lol
Brother, when I watched this in the beginning, I was like “Wha Tha heck !?” But dude, you are the man!!! There is a method to your madness lol. Amazing job!!!
@SprayWayCustoms
6 жыл бұрын
🤣🤣lol....I would've thought the same thing...thanks man
@jamber787
6 жыл бұрын
SprayWayCustoms lol my pleasure
I absolutely love your channel, when I want to just relax and chill I throw on your videos and learn, and try to understand all the steps and things I ever wondered about how to do when it comes to automotive work….. really appreciate you bruh frfr
@SprayWayCustoms
2 жыл бұрын
Thanks Brian…glad to have you on the team 🤝
Gotta give you props bro that creativity on a new level I haven't seen real creativity like that in years your making a path for any real enthusiasts to follow its really refreshing to see that there is still people out there crafting there vehicals instead of mail ordering prefab crap honestly I watched the whole video and seen your vision as you was describing what you was doing keep making these video
@SprayWayCustoms
5 жыл бұрын
Daniel your comment is very much appreciated. Thanks
iwas like this guys nuts lmfao... than the end im like brooo i wish I was like this dude lmfao
@SprayWayCustoms
3 жыл бұрын
Lol 😂 thanks Wes
1 hell of a update big hommie enjoyed every last minute!!!good shit
@SprayWayCustoms
8 жыл бұрын
I enjoyed doing Dominick....thanks man
@charliehustletrotter9867
7 жыл бұрын
SprayWayCustoms I'm fa damn sho sookin up dis game cause it's too BE SOLD NOT TOLD REAL SHIT KEEP UP DA GOOD WORK MY DUDE
That Is Above Proffessional Work. U R An Absolute Genius. When I First Started Watching U Cut Up That Door I Had No Idea That It Would Be Such A Fabulously Beautiful Work Of Art. U R Indeed An Impeccable Craftsman.
@SprayWayCustoms
5 жыл бұрын
I really appreciate the major support Jimmy
Hey sprayway just wanted to let you know that I appreciate your videos. I have alot of ideas for my 07 Chevy short wide and you helped me figure out how to get it done. Keep doing what your doing.
@SprayWayCustoms
5 жыл бұрын
Thanks David. You very much appreciated
Sweet door panel! I might try this on my truck. I need a arm rest.
Im re-watching this vidio for the second time in recent months and i gota say your good at what you do! Your doing all the stuff i always wanted to do but didn't know how! Pretty f**kn cool!
@SprayWayCustoms
6 жыл бұрын
I'm glad it help you on some of the things you was questioned about..Appreciate you
Couldnt believe how amazing it turned out ! Amazing job!
@SprayWayCustoms
3 жыл бұрын
Thanks Nick
I just started watching your videos a couple of weeks ago. You are the Picasso of custom car interiors and paint jobs. I was inspired to try a couple of projects, but so far I just make messes.
@SprayWayCustoms
3 жыл бұрын
Thanks for all the support
Dayum man... that's a beautiful paint job. Nice work. There's no substitute for taking your time and putting in the effort. Subscribed.
@SprayWayCustoms
6 жыл бұрын
Troy, I appreciate you subscribing and the inspiring compliment...yes patience is a must
My ears got some relief when "I got em" came out 😊
@SprayWayCustoms
4 жыл бұрын
😂😂lol
This outcome looks Phenomenal, it looks nothing short of Amazing.
@SprayWayCustoms
2 жыл бұрын
Thanks Donna
SprayWay, hats off. The start to finished product is mind blowing. Been binging your vids before I start working on repainting my engine bay.
@SprayWayCustoms
2 жыл бұрын
Appreciate you
You have amazing vision! I had a hard time seeing that chopped-up panel becoming the finished product. :-) BTW: Try using epoxy resin (used for countertops) instead of repeated attempts in using bondo fillers and sanding. It will save you time and effort while simplifying the process and materials list, and will result in a very high gloss finish! Thanks for the amazing video!
@SprayWayCustoms
4 жыл бұрын
Thanks for the info Phill
After 20 mins of “you’re gonna love me” I had to skirt p to the end... good work.
@SprayWayCustoms
6 жыл бұрын
Thanks man
@georgedewald3597
3 жыл бұрын
Facts
Got my subscription. The fact that you make money from this and still explain the process shows how humble you are and speaks a lot of your character
@SprayWayCustoms
4 жыл бұрын
Thanks J Perez. It's all about helping the next man
@jperez1083
4 жыл бұрын
SprayWayCustoms I don’t have a big enough compressor to paint. Is there any spray paint cans you would recommend from primer to clear? Ive built a box like this using fleece and use to work for a yacht building company called hatteras. Got plenty of background in fiberglass work
Omg at the beginning I was underwhelmed to say the least but at the end I am truly floored, you my friend have a true talent and do amazing work, it's just amazing how you went from nothing to show quality, keep up the good work.
@SprayWayCustoms
Жыл бұрын
Thank you so much 😀
That panel went from woa! to bad ass..Serious creativity there..
@SprayWayCustoms
8 жыл бұрын
Thanks...DW...How's that foot feeling?
@ding0925
8 жыл бұрын
Hurt like hell both of them.. i dont take pain meds and surgery wont bee for a week or so..keep up the good work..
@SprayWayCustoms
8 жыл бұрын
Thanks...I hope everything goes well for you.
@ding0925
8 жыл бұрын
SprayWayCustoms thanks..
you've inspired me to go and buy all the stuff I needed. about to start my first job. ima post pictures probably for my first go. maybe u can check them out sometime. would be the work or your apprentice. I've watched pretty much all your videos. everything is clean af. don't listen to what no hater got to say on here. names chunk. showing some love from Florida. hit da flo. here we is boooiiiiiii.
@nitablackwood6301
7 жыл бұрын
you started yet ?
@chunk386
7 жыл бұрын
Sakima King I got the rings cut out. that's it.
@nitablackwood6301
7 жыл бұрын
gotta start somewhere . good luck
That is INSANE!!! the way the blue comes through....OMG!!!
@SprayWayCustoms
4 жыл бұрын
Thanks Rich
Brother you are gifted in this craft. Straight up get yourself a small store/office where you can set up a shop and teach clasess like monday thru friday for a month. Teaching DIY people how to do it. You could charge each person for the course like $1000 each. Monday - Friday 4 hours a day.
@SprayWayCustoms
2 жыл бұрын
Thanks for the support David
Unreal!! You have talent brother.. music drove me nuts but the way that turned out! Wow!
This brother got his shit down killer work guy
@SprayWayCustoms
6 жыл бұрын
Thanks for the support George Micheal
On bud video 3, can't stop watching. I have a 85 cutlass that needs a dashboard. I'm so doing this, the whole interior is getting a new look. Thanks, you're awesome ach. Shalom
@SprayWayCustoms
5 жыл бұрын
Thank you so much Jasmine G
I keep adding your vids to the files I'm building up for when I do what I want to my Marquis. Thanks for explaining things in a way I can understand!
@SprayWayCustoms
2 жыл бұрын
Great...thanks John
Foreal I really thank you for taking the time and effort to record this work, I know it's not easy to record at the same time! You gave me the confidence to do my doors on my 87 box, Salute from Denver G ima burn one for ya
@SprayWayCustoms
6 жыл бұрын
Alex thanks for the support man....you need to upload some vids of your build
@tubesocktv69
6 жыл бұрын
You know the business!!!
@tubesocktv69
6 жыл бұрын
You on IG? Follow @tubesockglasshustle
@SprayWayCustoms
6 жыл бұрын
I'm not on IG yet
@tubesocktv69
6 жыл бұрын
Mane you'd be instafamous on the gram
Geniuses always have a flaw that’s when I come in, duck tape that camera 🎥 to a hard hat. Nice work G.
@SprayWayCustoms
5 жыл бұрын
🤣🤣Thanks Zello King
@adrianfuller3782
4 жыл бұрын
@@SprayWayCustoms what u charge for the fiberglass panels
what an ingenious way to add the pleats to the panel. Awesome !
@SprayWayCustoms
4 жыл бұрын
Thanks, glad you like it
Man I just found your video's 2 days ago and I'm enjoying watching a craftsman at work! Makes me want to go get some old door panels and have a go at it!!!!😁😁😁😁😁
@SprayWayCustoms
5 жыл бұрын
Thanks man. I'm editing a new fiberglass vid now
Straight up sick as hell ! (as usual ) and my man's doin it while Hand holding the camera most of the time !
@SprayWayCustoms
8 жыл бұрын
Appreciate the love bro....thanks for the support
@KDD8
8 жыл бұрын
+MRBIKERFINGER #Respect
@SprayWayCustoms
8 жыл бұрын
Hakasauars ... Thanks
turn out really nice
@SprayWayCustoms
8 жыл бұрын
Thanks Julio......glad you liked it
Man, I didn't know what to expect as the end result, but I was not disappointed. You got game!
@SprayWayCustoms
3 жыл бұрын
Thanks Rene
May God always Bless you’re creative ideas and outstanding outcome of all those pieces of art that you come up with.
@SprayWayCustoms
5 жыл бұрын
Thanks man
Damn, that paint looks 10 feet deep!
@SprayWayCustoms
5 жыл бұрын
Thanks for watching Ron Cosby
Yo bro you got straight skills! Good job wish u lived close to me so I could hire you to do some work for me . If you dont already have your own business you definitely got the skills to be successful. Your going to be a very successful business owner. Great job again!
@SprayWayCustoms
5 жыл бұрын
Thanks for the support Mexican American
Bro i painted in school 14 years ago and I jjst wanted to say I got a little honda eg coupe and this video made wanna do body work again and paint cars again. Guy before me who had the car rattle canned the whole car and has over spray everywhere. Worst of all he done white over red 😒 😪 over spray everywhere and I got a couple rust spots to fix. Thanks for this video man. Ima repaint the whole car to this and maybe change my job title real soon. 💯‼️💪🏼🙏🏼🙏🏼
@SprayWayCustoms
3 жыл бұрын
Thanks man
1 off...so cool man, thanks again for your vids. Gives a lot of us garage diy guys hope!
@SprayWayCustoms
4 жыл бұрын
No problem... thanks for watching
Man I love your videos, you are creative! ever seen corrogated plastic? its just like cardboard but plastic, that way it wont rot or get moldy.
Yes! Your getting some serious love on YT because of this video and you deserve every bit of it! You got some natural talent bro and I'm honestly fuggin jealous! That door panel turned out with the quality of a high dollar custom car Fab. You will definitely make a name for yourself if you stick with it. And KZread if a great place to be for you. Twenty five years ago you'd be an awesome body and paint guy but with yt I think you could make yourself WELL KNOWN with the skills you show here. Keep it up, and next time you're in Austin Texas... I need some help with some door panels bro.. lol. I'd let you work on my shit anytime, and I only let myself work on my cars! Good luck!. Oh yeah who was that last song by? I laughed at it then next thing I knew I was bobbing my head! Lol. Thanks again man.
@SprayWayCustoms
5 жыл бұрын
Thanks for the support Tony. The last song was called Blinded by Jackie Chain
Looks great man I love watching the paint spray on it’s like magic in front of my eyes
@SprayWayCustoms
5 жыл бұрын
Thanks 🙏🏽 Garrett Cotten
Man, I know this is 4 years old but I still love your stuff. You have a great talent. Craftsmanship like this is hard to find now days in the world and its obviously something you love. Thanks for the video and I just wanted to show some love back by sayin thanks and keep em coming, because I could watch your videos all day. Good luck to you in all your future projects.
@SprayWayCustoms
4 жыл бұрын
Thanks for showing love
nice work man! do you have a video of the finished car!
No More Music MAN! .Sounded like a broken record.🤦♂️ Still great work tho👍.. Respect from California.
@SprayWayCustoms
4 жыл бұрын
😊😂😂
That’s crazy. Unlike other I had no issues with the loop! I also watched the full vid in confidence that you were going to make the panels 🔥🔥🔥 Good work as always!
@SprayWayCustoms
4 жыл бұрын
Thanks Tyrell..glad you enjoyed it