That's an awesome design

Хехе) Я тоже всегда каску надеваю, когда зенкую отверстие))

that is seriously awesome

@freekingawwsome

3 жыл бұрын

@Man Caver Tools I'm catching up to you on seeing good videos still a few months behind . Take care brother.

Why all the fuss for an exact height adjustment while clearlly there is plenty of thread left on the stud ?

Hehe, must say im impressed, tools are half the job... myself i only use light touch with angle grinder and drill a hole in the middle for a bolt... yeye prolly to old school nowadays...

Can this be used underwater if hydraulic tooling is utilized?

عمل جيد

Amazing! It is likely to have a galvanic pair condition betwen copper compresion lug and the threaded stud?

@HiltiNorthAmerica

3 жыл бұрын

Hi Sandro - The S-BT-HC is available in different versions to work in most corrosive environments - if you have specific questions please contact us directly at 1-800-879-8000 (US) or 1-800-363-4458 (CA). Thank you! -Hilti North America Social Media Team

Drill a hole and fixed wire with bolt, washers and nut, no? Does it complicated?

Спору нет круто! но цена за одно заземление очень дороговато. проще насквозь засверлица или приворить болт или удлинённую гайку и прикрутится.

как то сложно все , просверлил насквозь и забалтал на болт да и все ?

@1K_VOLT

3 жыл бұрын

А можно вообще без заземления :)

@Anver_Silyaev

3 жыл бұрын

Нутк. Эти нерусские европейцы вечно всё усложняют ))

Что бы сделать заземление, надо овердохуа денег на Хилти.

I've seen this installed for bonding, and compared to studs welded to structure or regular bolted connections trough, or tapped holes with bolts, this type of connection is just poor and tends to become loose due to corrosion/vibration/expansion and contraction. It's basically a "cold welded" threaded bolt, where all hope is placed on the threads getting "stuck" in the material. Often times they simply don't.

@asymptoticsingularity9281

3 жыл бұрын

cadweld

Как то сложно

Does HILTI supply the connections and the tool. Or only the tool?

@HiltiNorthAmerica

3 жыл бұрын

Hi Gino, thanks for the message. We don't offer connections. In addition to the tool, we also offer the threaded screw-in stud. Visit hilti.link/USw for more information.

@ginochiaramonte1

3 жыл бұрын

@@HiltiNorthAmerica thanks for the answer. Very nice features. Do the Stud and tool work in the running rails of a Metro railways? DC current return application for example and/or signaling applications?

@HiltiNorthAmerica

3 жыл бұрын

Thanks Gino for the follow up question. We will have to get with our product technical team and find out the answer. Will get back with you once they reply. Thanks!

@HiltiNorthAmerica

3 жыл бұрын

Gino - The X-BT system has been successfully used in rail track connections for e.g. signaling - for reference please see the attached video from our global group: kzread.info/dash/bejne/gn1mxbOSidXWhqQ.html

@ginochiaramonte1

3 жыл бұрын

@@HiltiNorthAmerica great tool, great solution. It would be great if we could also use in DC current return connections. The most common cable used for DC current return in Brazil is 240mm2 or 500MCM. And for the templates to guide the drill bit we have UIC60, TR57 ( 115lbs) and TR68 (136lbs) heavy hall lines.

Шурик конечно лютый шлак, не было еще больше, а то как то маловат.

Don't forget your wire nuts, man.

One hilti machine gift for me ?

Hard to tell how far to go in with shoulder. I do not like this method.

L'unica cosa di ilti è che è rimasta indietro con gli avvitatori....sono rimasti a 20anni fa....

It looks weak.