Remember to keep the design lower than where your mouth will be touching the glass. Rub N Buff isn't food grade or food safe. You do not want that stuff anywhere near your mouth!

Thank you you explained it very well I just etch a casserole pan and it looked light to me so I will try and put the rub and buff

Hello, I absolutely love your glasses. great video. thank you.

Finally, someone who uses a float tube to hold their glass or cups. I glued mine down the middle.

Thank You,! This was very helpful....

BEAUTIFUL!!!!

Gorgeous 😍

This is a godsend!

@itssojohnsondesign2626

2 жыл бұрын

Enjoy!! Would love to see what you create! Tag us!

Thank-you so much! Everyone was using the rub and buff from behind a glass plate. I'm doing this etching and rub and buff on the front of a glass bottle that won't be washed, just dusted if need me. Love the tip about the silver vs. gold! Following you know for more tips!!!

@itssojohnsondesign2626

2 жыл бұрын

So glad this was helpful! Let us know what else youd love to see!

@rosemarywilliams5136

7 ай бұрын

Can you seal it for dishwasher

Quick question have you done this on casserole dishes? If so does it hold up in the oven and multiple washes? Please do share or anyone who’s tried this thank you in advance

After applying the rub & buff, how long do we let it sit before whipping the excess off?

Does it automatically seal? Or do you use something to seal it like a mod podge or sealant spray?

How does the rub and buff hold up in the oven. I want to do casserole dishes

You don't need anywhere near that amount of rub'n'buff for something that size. Depending how often you use the stuff, with that amount you will burn through a tube fairly quick, which will start to get a little costly. Just the first blob you put on the "Hubby" glass should be plenty. The stuff goes a very very long way.

Quick question. Is there a way to seal the rubbing buff on the glass or does the glass not need to be sealed?

Hi I am new to circuit 😊what products do I buy in order to do my etching I normally just buy the reusables from hobby lobby but want something different

Are these hand wash or dishwasher safe? Thanks

How long does the run and buff stay on with regular use?

Would you be able to share the best font size to use for different sizes of champagne and wine glasses?

@itssojohnsondesign2626

Жыл бұрын

Size would depending on the whole design and the shape/size of the cups I use a measure tape to check the area and gage my design from there. And always do a test cut

Thanks for the video! I saw some people used mod podge to protect the design when its being washed. Could we still add that after the rub and buff or will it mess the design up?

@itssojohnsondesign2626

2 жыл бұрын

Sure. You can try it. I never have used that method.

@starrniece6779

2 жыл бұрын

@@itssojohnsondesign2626 thanks!

Can you use a microfiber cloth to buff with? What were you using? Thank you.

@itssojohnsondesign2626

2 жыл бұрын

I used a cotton shirt. I have one in my craft room I use for small projects and testing things. but you can definitely use a microfiber as well.

How do you avoid the vinyl/stencil coming off when you wash it?

@itssojohnsondesign2626

2 жыл бұрын

Hi! You will gently wash however- Removable vinyl may lift a bit, but permanent vinyl will give you the best stick. As you dry it, be sure to pat dry as smaller pieces, and thin edges will flip and move with hard scrubbing

What do you put on the cup after the rub and buff so it doesn’t come off

@itssojohnsondesign2626

2 жыл бұрын

We leave it as is.

These look nice. Why don’t you use painters tape around stencil so that no etch cream accidentally gets on the other areas of glass?

@itssojohnsondesign2626

Жыл бұрын

You can definitely do that. Or the vinyl is fine if you give yourself enough room from the design to the edges

Do you ever have residue from the vinyl? If so whats the best way to remove it

@itssojohnsondesign2626

Жыл бұрын

Using removable vinyl helps alot with residue. And much easier to remove. If there is any you can wash it and itll come off well.

I had great success with the silver but I found the gold to be a nightmare. It just would not completely come off the glass that was not etched. I tried two different shades with the same results. I ended up having to use acetone to get almost all of it off and then use silver on top. Have you used gold successfully?

@itssojohnsondesign2626

2 жыл бұрын

Really?! I didnt have much of an issue. i have used both. Sometimes if the surface is still damp/wet from washing the etch cream it can make it harder

@kHoPhAe

Жыл бұрын

Same here.

Beautiful!! Where do you get the design? I would like to recreate for my nephew’s upcoming wedding. ☺️

@itssojohnsondesign2626

10 ай бұрын

hi! thanks, I believe I got that from Cricut Images.. you can search mr and mrs and there's many nice options- just be sure its not too thin for the process

I've read that rub n buff washes off after about 10 washes is there a way to make it permanent?

@itssojohnsondesign2626

2 жыл бұрын

Rub and Buff is permanently into glass, its when you start chipping at it or scraping it that youll begin to fade it. Also because we used etch cream on the base it helps to hold the rub and buff in, as would if we sanded the material. It adheres stronger with that surface sanded or with the etch

How long do you have to leave the etching cream for it to set properly? I've failed miserably doing this, maybe I didn't do it right and I want to succeed the 2nd time around. Thank you so much for sharing this with us.

@itssojohnsondesign2626

Жыл бұрын

I leave it for a few minutes.. maybe 5 or so... what you can do is when you remove the etch cream dont remove your stencil vinyl yet. give it a wash and then dry it and you can see if it etched enough for you... a good way to know is once you wipe it dry look from the other side of the cup and you should see a "foggy" effect on the parts you etched. Hope this helps!

@kHoPhAe

Жыл бұрын

@@itssojohnsondesign2626 Thank you.

@lynnesmith8859

Жыл бұрын

I leave mine a minimum 20mins

What font did you use?

@itssojohnsondesign2626

Жыл бұрын

The Wifey and Hubby was actually found on Cricut images.. here is the image number if you'd like to find it #M1D75ACEC and #M1D75A9BA. I cropped the bottom off and added the full wedding date.

Um so at some point I would like to try this but in the meantime…how did you make your “ glass holder”? Just 2 pool noodles elasticized together?

@itssojohnsondesign2626

Жыл бұрын

Yep! I cut one noodle down to two parts and size as I needed. Some also cut them in half to get a flat side and glue it to a clipboard

@queenofhearts57

Жыл бұрын

@@itssojohnsondesign2626 great idea. Thanks for the quick reply and the very easy tutorial…going to try it once I do other projects on my list!

@catherinzarate

Жыл бұрын

I etched some glasses couple weeks a go but I can barely see the design, can I still add some rub’n buff?

@itssojohnsondesign2626

Жыл бұрын

@@catherinzarate yes. It should on the designed areas.

Is it gonna stay on after washing the glass in dishwasher?

@catherinzarate

Жыл бұрын

Is not dishwasher safe

Do we have to use rub n buff?

@itssojohnsondesign2626

Жыл бұрын

There are vinyls that can be used to give off the etched look.

@catherinzarate

Жыл бұрын

You don’t have to, rub and buff is just to make the letters more vibrant

The resulting letters looks more like a silver Sharpie than an etching.

@itssojohnsondesign2626

Жыл бұрын

We added a step and used rub and buff to enhance the etch.

Does it wash off

@itssojohnsondesign2626

2 жыл бұрын

Hi! Rub and Buff is waterproof. I would avoid putting in dishwasher however.

When using Armour Etch, please use plastic (not latex, not vinyl, thick plastic/rubber) gloves. That stuff is no joke and can burn through your skin, muscle tissue, and even seep into your bones. It is an extremely dangerous product that needs to be handle with care.

@jennifersmith6500

5 ай бұрын

I've been etching with Armour Etch for 25 yrs. LOVE IT. I put a good even heavy coat on, wait a few minutes and wash off with warm/ hot water then clean as usually. I've left it on a few minutes to an hour. NO difference in shade. I always lay my glasses down to help make sure no shadow. I have left it on my arm for an hour and NO issues. My kids wanted to help mom and now my grandson so I've repeated that and again no issues. But everyone is different.