Thank you so much for this video. Great camera angles. Your ability to communicate and instruct is exceptional! Well done.
@bazza10415 ай бұрын
Sir you are a star, I have had the MS170 Stihl version for many years. Recently it has been a pig to start or not start at all > fuel mixture was correct so only left ignition. Thanks to your video I stripped down the machine as far as checking the coil and gap. Although I had never touched it the gap was nearly non existant how it worked before beats me. After cleaning up the coil from gunk I reset the gap to .009 " as you suggested and reassembled. Couple of cord pulls and it started. I can't thank you enough for your excellent video
@imtruth69 Жыл бұрын
I find that a brass feeler gauge works pretty well also to set your gap. Nice video by the way. Thanks.
@HipaParts
Жыл бұрын
Brass ones are great. Thanks!
@JeremiasGarage7 ай бұрын
nice video! helped me with my chainsaw stihl ms170 :D thx
@THEMOWERMEDIC1 Жыл бұрын
A coil Can fire and still be bad. That said, you just about gotta have the PET 9000 ignition analyzer to tell whether or not the ignition timing portion of the coil is working or not
@mattresbert11 ай бұрын
Brilliant stuff Thank you
@brilheaint2 ай бұрын
thanks
@wmbowie658010 ай бұрын
Been racking my brain new coil,plug flywheel. Missing plastic piece underneath. Thank you.
@Lakeman321113 күн бұрын
That small twin hole spacer under the coil is typically a thermal bridge to reduce the heat from the cylinder from migrating into the coil and it’s electronics… yes the fasteners do act as sinks buy less than a direct placement…
@user-sp1qz5gh8x9 ай бұрын
torx bit on Stihl is T27
@bobadams36616 ай бұрын
what is your replacement module for Ariens 7524 snowblower. The numbers on it are 1A138-52-12 with 5111 below that? I will buy it, thank you
@HipaParts
6 ай бұрын
Sorry, but we don't have the ignition coil for Ariens 7524 snowblower so far.
Пікірлер: 16
Thank you so much for this video. Great camera angles. Your ability to communicate and instruct is exceptional! Well done.
Sir you are a star, I have had the MS170 Stihl version for many years. Recently it has been a pig to start or not start at all > fuel mixture was correct so only left ignition. Thanks to your video I stripped down the machine as far as checking the coil and gap. Although I had never touched it the gap was nearly non existant how it worked before beats me. After cleaning up the coil from gunk I reset the gap to .009 " as you suggested and reassembled. Couple of cord pulls and it started. I can't thank you enough for your excellent video
I find that a brass feeler gauge works pretty well also to set your gap. Nice video by the way. Thanks.
@HipaParts
Жыл бұрын
Brass ones are great. Thanks!
nice video! helped me with my chainsaw stihl ms170 :D thx
A coil Can fire and still be bad. That said, you just about gotta have the PET 9000 ignition analyzer to tell whether or not the ignition timing portion of the coil is working or not
Brilliant stuff Thank you
thanks
Been racking my brain new coil,plug flywheel. Missing plastic piece underneath. Thank you.
That small twin hole spacer under the coil is typically a thermal bridge to reduce the heat from the cylinder from migrating into the coil and it’s electronics… yes the fasteners do act as sinks buy less than a direct placement…
torx bit on Stihl is T27
what is your replacement module for Ariens 7524 snowblower. The numbers on it are 1A138-52-12 with 5111 below that? I will buy it, thank you
@HipaParts
6 ай бұрын
Sorry, but we don't have the ignition coil for Ariens 7524 snowblower so far.
all the screws are t-27. not a t-25
NICE Chips
@HipaParts
2 жыл бұрын
Yes, they were much better than the stock chains.