No video
How To Drain and Replace Coolant on the Yamaha XSR900 MT09 FZ09 FJ09 and Tracer!
In this video I’ll show you how to drain and add fresh coolant to your XSR900, MT09, FZ09, FJ09 or Tracer.
IG: / xsrdetroit
Intro Music: • Video
“STVRBOY”
Music in this episode
• (FREE) MF DOOM x Madli...
0:00 - Intro
0:29 - Draining Coolant
5:05 - Filling and installing Coolant Reservoir
8:06 - Filling the Radiator
10:52 - Outro
Пікірлер: 55
Thanks XSRDT- Overflow bottle is tricky - a small dab of grease helps hold those spacers. Safe riding amigos.
WELL DONE! I had been meaning to due my coolant on my 2019 mt09 but couldn’t find many videos on the procedure. You’re was very well done and explained it all very throughly as I was following along for each step of the way. I appreciate you man! Thank you!!
@XSRDetroit
Жыл бұрын
No problem! Glad to help
@Xzami09
3 ай бұрын
I use pentosin pentofrost A3 for my 2019 mt09. I change the coolant every 2 years. Good tip to check back the coolant after a 30 mins ride. Let bike cool down for several hours😊
Thanks for this! Very well explained and no unnecessary fluff. :)
Great video! Made changing mine super easy!
@XSRDetroit
3 жыл бұрын
I'm glad to help! Thanks for checking out the video
awesome video mate, looking forward to changing my coolant!
@XSRDetroit
3 жыл бұрын
Glad to help! Thanks for checking the video out!
collected, no frills. Thanks!
Cheers mate....very useful vid 👍🏻
Great video man
@XSRDetroit
Жыл бұрын
Thanks dude!
Thanks from Va🤙🏾
My 16 XSR hasn't been done yet, and neither has my 13 Speedie for that matter. 😬 Guess I'd better get on it!. Thanks man!, good stuff!. Gotta love KZread!.
@XSRDetroit
3 жыл бұрын
Thanks for checking out the video!
Thanks very helpful I like watching a how to video before I touch anything even if I believe u know how to do it because you never know if there's a trick to it
@XSRDetroit
Жыл бұрын
Glad to help, thanks for checking out the channel
I will try it! Soon 1K subscribers! Nice
@XSRDetroit
Жыл бұрын
Thank you!
Excellent video, made the job look easy! Especially grateful for the trick to check the coolant level with the LED flashlight. I gotta ask though, what front paddock stand are you using and how did you get it in that hole in the headstand? Last headstand I got was a bit short, and where the horn is located made it impossible. Did you relocate it?
@XSRDetroit
2 жыл бұрын
Thanks man. I didn't have to move anything to get the front wheel stand in. The front stand is a woodcraft with a 20mm pin. Had to to make some adjustments to it but it works no problem for me.
Very useful 👏👌🏻, any other coolant option from motul ?
2018 MT-09 2 32 fl oz bottles of Yamacool is enough if you don't bother with that pain is the A** overflow bottle. Gets you 95-90% flushed. Drain. Heat to 150. Top off. Let if fully cool 4 hours or overnight. Top off radiator one last time.
helpful video thanks ,,that spacer was annoying ,I wrapped some teflon tape around it and it snugged in enough to hold in place ,after I got fastener started I put the lower spacer in ,,that seemed like an after thought from Yamaha Its weird how your camera made it look like it was the left side thanks again
@XSRDetroit
11 ай бұрын
I had to film portions of this video with the camera upside down and fix it in post, which makes it look flipped. Thanks for checking it out!
Tengo fuga por la tapa del radiador, que debo de hacer?
took me a good 10 minutes to get the radiator cap back on 😭
Does anyone run one gallon of distilled water when draining coolant as the bike is running?
If you're filling the reservoir before filling the radiator do you need more than 2 quarts total of coolant? I'm doing a '17 fz09 and I just bought 2 yamacools.
@XSRDetroit
Жыл бұрын
Two yamacools should be enough
@supamotodragunova3674
Жыл бұрын
@@XSRDetroit I was just overthinking it. Very helpful video. Thank you.
how much coolant does it need to replace? are two bottles of yamalube yamacool enough?
@XSRDetroit
2 жыл бұрын
That will be enough. I bought a third bottle and didn't use it.
👍🇮🇹
Where did you get the engine cages from?
@XSRDetroit
2 жыл бұрын
They're Givi engine cages powder coated gold
Did you pour any coolant in the reservoir before you did in the radiator?
@XSRDetroit
2 жыл бұрын
Yes
@csiautodetail
2 жыл бұрын
@@XSRDetroit thanks
do you have a video of new exhaust by chance ,,The sound
@XSRDetroit
11 ай бұрын
If you check the riding clips playlist look for raw audio in the title
What kind of oil are you running? Thanks
@XSRDetroit
3 жыл бұрын
Mobil 1 full synthetic
How much liquid coolant be prepared?
@XSRDetroit
3 жыл бұрын
Should use under three quarts
How do you open the radiator cap?
@XSRDetroit
2 жыл бұрын
0:28 there you go
how much coolant do we need to fill it dude?
@XSRDetroit
2 жыл бұрын
Just under 2 quarts
I learned DONT take that Coolant assembly off That you fight with forever
Just use a syringe…that coolant reservoir is a pain in the ass.
@yourwifesboyfriend6081
Жыл бұрын
Came here to say the same.
That white spacer, I've lost my mind put it in back😅
@XSRDetroit
Жыл бұрын
Worst part of doing this job lol