I'll show you how to change your oil on your Sportsman 500
Жүктеу.....
Пікірлер: 23
@spinebreaker45076 ай бұрын
Just got a ‘04 500 HO had to rewatch your videos with the sound they make at startup idle where there is that slapping rod sound always got me paranoid. Thanks for the awesome video!
@TitaniummanGarage
6 ай бұрын
Usually its the bendix gear by the starter that makes noise. Or the clutch rattling.
@TitaniummanGarage
6 ай бұрын
On mine it was the clutch making that noise. I replaced the clutch and the noise was gone.
@spinebreaker4507
6 ай бұрын
@@TitaniummanGarage I hear the bendix a bit ordered one but there is that other slapping sound but like you said can be the clutch also it’s two sounds like in your video
@myneed4spd29711 ай бұрын
Hey, what’s the plug on the right side of the engine floor? It looks like it’s the clutch cover.
@ronniesmith37112 ай бұрын
Good video
@Arks1969Ай бұрын
just curious of what oil you use for that machine
@wantowski9877 ай бұрын
Just bought a used ATP 500 sportsman and heard you say about gas in the oil! Mine had gas in the oil also! What causes that? Thanks for the videos
@TitaniummanGarage
7 ай бұрын
Usually it's a leaking carb. Bad needle and seat. Leaks fuel into cylinder and down into the oil.
@chucklehman7610 Жыл бұрын
I have a 1999 Polaris 500 Sportsman - any idea where to find replacement plastics for it?
@TitaniummanGarage
Жыл бұрын
You could try ebay or powersportsnation.
@bradgeagley4019 Жыл бұрын
Have you ever used engine rebuild kits from a company called REV 6...they have a kit for $1400...for Polaris 500 engines...
@TitaniummanGarage
Жыл бұрын
Good company with quality parts. I have only used some of the parts they have from other vendors like their crankshafts.
@bonezcuztomz77035 ай бұрын
Great u know what size oil pan bolt
@TitaniummanGarage
5 ай бұрын
No actually I dont. I just know it takes a 14mm wrench to get it off.
@carolinaghost5451 Жыл бұрын
KEEP ON RECORDING VIDEOS ON THE 500 FI POLARIS
@TitaniummanGarage
Жыл бұрын
I plan on getting more EFI's Thanks.
@derrickphillips354 Жыл бұрын
Aren't you supposed to prime the oil pump if you drain the crankcase by using a pliers or hemostat on the hose of the top part of the oil tank? that has a slit in it.
@TitaniummanGarage
Жыл бұрын
I've heard of guys doing that. I would do that on a fresh rebuild. There is oil all over the inside of the engine when you do an oil change. So a quick start up like I showed won't hurt anything. It takes 3 seconds for the oil to circulate in the engine unless you have a weak pump. I've never had an issue.
@bwfreel
Жыл бұрын
I think you only need to do that if you pull the screen in the reserve tank, sometimes I pull it sometimes not
Пікірлер: 23
Just got a ‘04 500 HO had to rewatch your videos with the sound they make at startup idle where there is that slapping rod sound always got me paranoid. Thanks for the awesome video!
@TitaniummanGarage
6 ай бұрын
Usually its the bendix gear by the starter that makes noise. Or the clutch rattling.
@TitaniummanGarage
6 ай бұрын
On mine it was the clutch making that noise. I replaced the clutch and the noise was gone.
@spinebreaker4507
6 ай бұрын
@@TitaniummanGarage I hear the bendix a bit ordered one but there is that other slapping sound but like you said can be the clutch also it’s two sounds like in your video
Hey, what’s the plug on the right side of the engine floor? It looks like it’s the clutch cover.
Good video
just curious of what oil you use for that machine
Just bought a used ATP 500 sportsman and heard you say about gas in the oil! Mine had gas in the oil also! What causes that? Thanks for the videos
@TitaniummanGarage
7 ай бұрын
Usually it's a leaking carb. Bad needle and seat. Leaks fuel into cylinder and down into the oil.
I have a 1999 Polaris 500 Sportsman - any idea where to find replacement plastics for it?
@TitaniummanGarage
Жыл бұрын
You could try ebay or powersportsnation.
Have you ever used engine rebuild kits from a company called REV 6...they have a kit for $1400...for Polaris 500 engines...
@TitaniummanGarage
Жыл бұрын
Good company with quality parts. I have only used some of the parts they have from other vendors like their crankshafts.
Great u know what size oil pan bolt
@TitaniummanGarage
5 ай бұрын
No actually I dont. I just know it takes a 14mm wrench to get it off.
KEEP ON RECORDING VIDEOS ON THE 500 FI POLARIS
@TitaniummanGarage
Жыл бұрын
I plan on getting more EFI's Thanks.
Aren't you supposed to prime the oil pump if you drain the crankcase by using a pliers or hemostat on the hose of the top part of the oil tank? that has a slit in it.
@TitaniummanGarage
Жыл бұрын
I've heard of guys doing that. I would do that on a fresh rebuild. There is oil all over the inside of the engine when you do an oil change. So a quick start up like I showed won't hurt anything. It takes 3 seconds for the oil to circulate in the engine unless you have a weak pump. I've never had an issue.
@bwfreel
Жыл бұрын
I think you only need to do that if you pull the screen in the reserve tank, sometimes I pull it sometimes not
@dalegribble60
Жыл бұрын
@@bwfreel you are correct sir
Is that ur camera adjusting focus?
@TitaniummanGarage
8 ай бұрын
Yes