Good video but would have liked if you had of shown how to unscrew and take off the front cover. You had it already unscrewed

more more more!! I would watch you all day.

Thank you so much! Any tips on how to grease and what grease to use for around the plastic gears? Mine keeps making a squeaking noises and I can't figure it out.

Thank you so much!

What tools do you need to take your machine apart?

I´m in need of the LCD screen fot the ULT2001. Can you help me? Just the LCD part, as mine died out the liquid cristal.

Thank you for your video... I've been having some issues with upper thread, a mesage "Check and rethread the upper thread" but the thread is fine. I've noticed the handwheel has a bit of a play horizontally, so the main shaft moves and also moves the take-up lever. Is this normal to move sideways?

I loved this video. I was hoping you could tell me the secret to putting on a new handwheel?

Thank you so much!!! I am having a nesting problem and will check that out!!!!

Everything is well explained. My only suggestion is next time you shoot the video, please use proper lighting.

Hi Ray! This is David and Katie, your favorite students.

@SINGERonlinecom

6 жыл бұрын

Hi!!!! :)

Would you please show how to change the thread cutting blade? Mine will not cut lower thread even after cleaning machine.

Thanks

Where can I buy the blowoff stuff you used? I was told by service agent,not to oil my Brother machine apart from one drop on the race, but you were quite liberal with your application, should I risk it?

Thanks so much-- Is this pop-out cover or we need to screws to remove the cover, which screws did you remove? or did you remove any screws at all? there are several screws at the bottom of the machine do we have to remove those to start or not?

@SINGERonlinecom

6 жыл бұрын

You take all of the screws out of the plastic covers. None on the bottom.

My Brother ULT2003D stops......looses power. If I hit the side of the machine it comes back on. Could something inside be lose? Can I get to the main power plug by removing the front cover?

question, how did you fix it being locked up? I am having the same problem with the brother Pacesetter which looks identical.

@SINGERonlinecom

6 жыл бұрын

It has to be unlocked before you can fix it.

Would have been nice if you went in to detail what screws where need to be removed and the points on the case where the tabs are to get the case apart,

@LauraDellinger

5 жыл бұрын

This is the main reason I was watching this video. Useless if I don't know how to actually take the cover off. Glad I'm not alone.

@gballz

5 жыл бұрын

Yeah, where are the screws... “I already took the screws out”.. haha!

@gballz

5 жыл бұрын

Not really helpful at all.

@belindagarza3958

5 жыл бұрын

The video on how to replace the screen shows exactly which screws to remove.

@sherrylynn7771

4 жыл бұрын

@@LauraDellinger kzread.info/dash/bejne/q6t1yqNxg8_Xf5s.html

I have an Innovis 4000D and need to replace the handwheel. Is there a secret to it?

I haven’t used mine for years. I have had it put up. But when I got it out and put the embroidery carriage on it the display screen flickers and won’t let me access anything. Any ideas what this could be?

Thanks for your video. 2 things please, I thought you were never supposed to use compressed air on a machine and also I thought brothers did not use oil. Thanks for your help!

@SINGERonlinecom

6 жыл бұрын

Not true. Service techs do use the oil & air.

@VRUAN

6 жыл бұрын

After you open up the covers, you can use air. Brother doesn't recommend to oil the machine because it doesn't want you to open the case. Brother wants it to be done on a dealer (and charging you handsomely, of course).

@sarah28538

6 жыл бұрын

I bought a brother and they did an update on the computer board but gave me the other one back. Can I put the old one back in myself?

@VRUAN

6 жыл бұрын

They replaced the board for a reason. Examine the other board carefully to see if there is any burn mark on any component? If the board is defective, and if that was the reason for replacement, then the malfunction is most likely due to burned capacitors. Replace those capacitors with a solder iron usually can make it work again. Of course you can put it back before doing anything else for testing purpose.

Hi I hope you read this comment I have a bother ULT 21 and it's from Japan but I'm not living there. the thing is I can't remove what on the bottom my bf used a wrong plug and something burnt a little, I think it's just a fuse but I don't know hot to open it, would you pleeease help me ??? It's such a pity if it stays without use. Please help me 😭

My needle bar wont move position, right to left, is looks almost loose and somethimes does nothing if i change my needle position, to the center point, i tried oil the lower shaft gear but it stil wont move is there screw i might need to adjust?? Can't find anyone talking about this of with the same problem, very frustrating

@SINGERonlinecom

6 жыл бұрын

You need some internal work done, but if you'd like to share your model number we might be able to help you.

Thread broke. When I pulled it out, it brought a little piece of “sticky backed soft brush”. What is it and where does it go on the machine?

@vickdegiorgio2151

11 ай бұрын

Likely is part of the bobbin winder or the thread cutter, both of which have those brushes.

Where to find and remove screws is what I need to see

@sherrylynn7771

4 жыл бұрын

kzread.info/dash/bejne/q6t1yqNxg8_Xf5s.html

My Brother 950D only sews in reverse...what can I do?

شكرااا

@timchang9894

4 жыл бұрын

?

Hack

A disassembly video that shows nothing where the screws are and how to disassemble? Come on man!