"When you're ready to choose a shaft length for your movement, if there is any confusion at all, give me a call." Classic.

Very well done. Clear and concise. Thanks

This is wonderful. 👍 Thank you

Very helpful. Thank you.

Thank You very much !

Thanks for in-depth explanation. But my live-edge wood clock to be is 1and 2/16 inch thick. Is there a shaft available that’s long enough?

Hello. I’m hoping replace the clock mechanism to a real nice wall clock I’ve had since 2003. I can’t find a new one to replace it with, so I’m hoping to fix the clock I already have. I purchased a clock mechanism but I can’t seem to be able to remove the existing one. I removed the hands but I can’t remove the part the holds the arms. Everything is smooth and can’t get a grip on it with small needle nose pliers. I will provide some photos to see if I can get some help. Thank you in advance.

Thank you 😷

do you have a video on how to remove the hands from an existing movement?

Vety helpful. Id like to know how to attach the click works to a stretched canvas picture. What size shaft How to secure to csnvas My frame is about the same thickness as the clock.works.

What shaft length would I need to go through 18mm mdf please?

Want to learn more of dis!.

what is common length of thread shaft if I want upgrade to a quiet with sweep second hand motor

@Mentorcase

3 жыл бұрын

I got a silent device and it goes through the batteries every 3 months.

Hi. I'd like to use a motor through the core of a bicycle wheel. Is there a motor with a very long shaft as in 2 or 3 inches? Thanks.

@pw2639

2 жыл бұрын

Cool idea!

Good

Sent these guys an email at the address provided enquiring about a replacement quartz movement for #7032 quartz westminster chime movement used in a Linden mantel clock a few weeks ago. Still awaiting a response

@chareve1958

3 жыл бұрын

Ha! I saw your email on their website!! Did you ever call? I'm trying to figure out how to repair my wall clock. :)

How big the thread if and whether it is in different sizes available?

@Randalian

Жыл бұрын

Most clocks are 8mm x 0.8 pitch; the thread can also be female (e.g. Hermle brand). If there is an unthreaded boss it is commonly 10mm.

I just bought 4 replacement movements but they are all too long and the second hand touches the glass, moving the whole unit back didn't work because then the movement stuck too far out the back so I just cut all the shafts down and filed a step for the hands to go over and all is well.

@dhananjayaraoraovadlakonda6502

5 жыл бұрын

Mentorcase vv

@_1ben

3 жыл бұрын

Would installing washers on the base before it goes into the material help you ? It should

@Mentorcase

3 жыл бұрын

@@_1ben It will stick too far out the back, cutting the shafts down worked for me.

why does no one ever say what the drill hole size should be since not everyone is replacing a clock mechanism but building.

@missmaureen9509

3 жыл бұрын

That's what I'm trying to find out. Are they standard 5/8" thick shafts? Are the holes standard? If you found out, please let me know. I can't seem to find that information. Thanks

@garyo1829

2 жыл бұрын

@@missmaureen9509 Hello, I build Acrylic clocks and I have used several brands of clock movements, (motors) and even though they have had different shaft lengths, they have all been 7.4mm, (.29") thickness at the brass threaded part of the shaft. I have never seen one with a different width so far. I use a hole that's 7.950mm, (or .31") I'm cutting with a laser, but a 19/64th drill bit will be OK too.

@uniquekreationz6832

2 ай бұрын

I use the 5/16 drill bit...it's perfect size for shaft..it's just right..not too big or small

@freebird1963

2 ай бұрын

@@uniquekreationz6832 Thanks. Appreciate it.

My clock will be 36" x 36" square. The shaft length isn't my concern. It's the motor size. I'm using 1/4" to 1/2 " wood. Great information. Thank you.

Wall clock mechanisms

Help!!!

What would be the correct size to create a clock from a vinyl record can you please send me the link

@normanacree1635

3 жыл бұрын

If the shaft is too big in diameter, simply use a pair of scissors to ream it out a little. Open the scissors up, insert the narrowest part into the record hole, and start twisting. Check often to see if you have removed enough material as the vinyl is easily removed. Other methods work, too. Be creative. It ain't rocket surgery.

I bet this guy can talk to elephants.

The information is wrong! There are different shaft diameter measurements where the hands fit. On mine the original hands were too big in the bore to fit the hour, minute and second hands. This is waffle about shaft lengths and probably the only one they sell with no worthwhile information other than that. Check the diameter where the hands fit as well as the shaft length.

I filled in their questionnaire which said they would respond in 24 hours. 48 hours later nothing. Called the shop and never spoke with a live person, after 20 minutes I hung up. I understand the Corona stuff, but are they so wealthy that they don't want new customers?

The best bit was when he said shaft

My shift is really long. I don’t think I’m gonna be able to get into the hole. Lol!

@fractally

4 жыл бұрын

Grow up, widdle boy, you are embarrassing yourself.

@JmelBst

3 жыл бұрын

Measure it in inches.

Did you seriously just post a video promising to explain how to tell the different sizes of the quartz clock shafts and then absolutely not tell us where the measurement is?? I’m taking an old one out of my clock, all I needed to know was where to measure so I knew I was getting the exact same size that I needed. I can’t believe you could not be bothered with six different sizes sitting there to not tell us the size of all six of them so we knew what to replace. And FU for not bothering to answer anybody’s questions on what size they would need for the last couple of years. What an absolute waste of time 😡