Finally an easy-to-understand and well-explained tutorial.Hats off to you!

Thank you so much for that great tutorial

this is an amazing insight into the build, i just subscribed i also have built a 50 watts, 75 watts panel and 2 wind turbines on my channel successfully

Thank you! Your video was very informational and easy to understand.

Excellent!!! thank you.

Awsome bro nice circuit design and software. I like it

One of the more useful jlcpcb tutorials thank you

@jjoosshhb2193

4 жыл бұрын

its cus hes indian

Excuse me for the blunt question, can I know why does EasyEDA does not automatically generate holes/pad for Vcc and GNB which can be used as power supply to the board.

Nice info, well done, thanks for sharing it :)

Such a great explanation thank you

मेरे दोस्त यह विडीओ हिंदी मे बना बहुत लोग देखेंगे और बहुत को फायदा भी होगा जो इंग्लिश आछी तरह जानते है वहु एक तो खुद सिख लेते है या फिर विदेशी विडीओ हि देखते है आपका नॉलेज excellent है पर हिंदी मे समजाव

Many thanks ! Great vídeo !

Thx so much really helpful

Too GOOD and very much helpful

Really good video thanks for making it

Thanks for sharing your knowledge.

Thank you!

Helpful video 👍

Drawing of copper area for both layer is mandatory,for Fabrication??

Please tell me another method of doing things I changed pads of components, but after some time I found some corrections I make them and Import changes to pcb layout after this All pad changed as they were very first pcb conversation I stucked If I change pads then I can't import changes, If import changes then everytime I have to change all pads

Good job.

Great tutorial

Thank you sir!

Thanks for this video. please Make another video on how to place smd on both side of PCB.

Thank you very much 🙏

Very good explanation

I was waiting for a detailed tutorial.Thanks sir

Thank you for the good video. Please consider adding a video that explains how to select the mechanical sizes: of holes, capacitors, screw holes, and nets width, etc.

Can we able to draw a circuit diagram through observing the already made pcb??

`Thank you very much my Friend

Thanks bro for telling an easy way to prototype pcb😍😍😍

Very very useful tutorial 👍 thanks for sharing. Is it possible we can simulate circuit in easyeda software? Please reply me 🙏

I am in search of PCB designing since long time. Thanks!

Thanx for this video we want this video

i cant use bottom layer in eda. when i choose bottom layer and start to wiring, after touching pad automatically bottom layer selection is changed into top layer. any ideas for me?

thank you is very good

Very useful tutorial.. Good Explaination thanks for your vedio.. 👌👌

Great tutorial. Cheers from the USA.

I have a question if u r using a top layer (red) then how can it be just under components how u gonna solder it?? for our small diy projects we have one side copper layer which is the bottom layer(blue), actually we are looking down from top to bottom and the layers help u to control. I dont think the top layer u r drawing make sense here what i mean is we cannot lift the component and solder underneath , looking from top.

thank you for this video and i subscribed your channel..

I want to use it for my4 band graphic equaliser can u guide me how to connect sliding potentiometer I didn't find it in component

Clearly explaind before this video i was having many doubts but after watching the video my all doubts cleared. Thanks so much

Very cearly explained and thank you keep up the good work. May i know how much did they charge for the shipping of the boards

thanks very good tutorial

Thank you

Awesome tutorial, thanks for this useful post..

Great vedio Sir.......v informative..thanks v much.

Thanks a lot for this clear tutorial. That website truly is amazing.

Thanks For Everything

Bro..thank you so much. You are really helpful. Cheers from Indonesia.

Thanks!

Hi, can you do a tutorial on how you did the bottle filling machine project, please.

Can you eliminate a lot of the ground tracks via a ground plane?

Please can someone help me out I just maked a schematics on easyeda but when I try to convert it to a pcb it dose nothing I have saved the schematic but it still won’t convert it to a pcb if someone no’s why or can you help please can you or can I email you with a pic to show what it’s doing

How this app allow us to have components on both sides (especially SMD components) thanks

Can I use this software through mobile

Thank you so much

Thank you doen sharing and like🤩

Great thank you brother

How can i check my schematic is free from error.. And is ready to convert in pcb

Je to výborný seriál, zvláště pro začínají pracovníky

Very useful. Thanks a lot Easy HomeMade Projects !!

Before this video i was having many doubts, but after watching the video EVERYTHING cleared. Thanks so much SIR

Thank you for the lesson. is it possible to convert png format circuit download from the Web?

Nice information

Your projects are awsome.. But pls make single layer pcb layouts. Pcb making with copper clad is not possible in two layer pcb layouts, Or please make a video about how to convert two layer pcb layout garber file to single layer using easy Eda software

what are the components to create a circuit for WIFI? or internet interface.

excellent...….

Fantastic explanation thankyou

One more tips... in the schematics u can simply select the components and hit the spacebar to rotate really fast.....boom.

Great video, but I do not understand what you are doing at 13:05. Can you please explain?

Very nice tutorial. Is there a way to properly align components in the PCB design. Like, I know it doesn't affect performance, but for example those resistors are a bit misaligned

@mandeep5993

Жыл бұрын

Yes, it can be done. Select the components (by pressing and holding the Ctrl key) and, go to the top menu -> Format, and select the desired alignment.

Actually u can go to the auto router and check (tick) only the bottom layer and run....boom, then u make ur tiny adjustments. I think auto router is the best....trust me i have done some its fantastic.

WARNING JLCPCB has a very very bad service, i have order in total 5 project and only recieved 3 of those, the 2 missing NO REFUND ANDNO HELP solving it thay just say just reorder it (with again paying for it)

What does "unfinished net" mean?

sir, how can i get components pad layout print?

I have the same video on my channel and i must say i love your delivery.

how about shipping cost to India

Thank you dear friend I am Arabic follower on KZread

Great Video , Thank you 3 years later in July 2023

I have a box I purchased which has a 12 pb keypad, I want to take out the original pcb and create my own, repurposing the small enclosure. Is there a way to place pads on the board by using x y measurements so I can place the pushbuttons in the same location as the original board?

@EasyHomeMadeProjects

3 жыл бұрын

You can ask their support team.

@TheUnofficialMaker

3 жыл бұрын

@@EasyHomeMadeProjects good answer, I will give them an email.

Thanks for the video. I tried to make a simple PCB with an EDP8266, MAX485, RGB LED and a few resistors. The auto-route gave me an error; attempted: 55, completed 54, failed 1 but there is no guidance where it failed. How can I trace where the error is?

@EasyHomeMadeProjects

3 жыл бұрын

Left side, design manager

How to design single layer pcb? how to apply setting in easyeda tool?

Bhai agr mota diode lgana ho to holes size kaise bdega

WHAT IS THE OPTION TO CONVERT JLC PCB

How do you do that routing

Excellent...you cleared many doubts...

Hello how much do you charge to make a gerber file for me ? I need to Oder some PCB thank you !

Hi How to Add Interactive Html Bom to easyeda

Bro please make audio amplifier

How to take dc 15 voltage

Sir please tell me how we find the circuit diagram

For me it's coming like (no schematic in the diagram!)

Please tell is it possible to change circuit connection in schematic diagram after 90% complition of PCB layout I connected wrong connection in schematic and found it after 90% of completion of PCB tracks layout Please tell me easy way so my PCB layout struggle not go waste Or I have to make whole PCB layout from scratch by stating by placing comments

@EasyHomeMadeProjects

3 жыл бұрын

Simply make changes in circuit diagram and then click on "update pcb" option under pcb design option menu.

How to get this software?

Powder filling machine please

one video make how to use simulation.

How to download pdf home etching pcb

Brother can you please explain, if i want to take print out of the circuit which i made in easyeda, for pcb etching process. Which option should i need to select in easyeda software? So that I can take print out?

@EasyHomeMadeProjects

2 жыл бұрын

Watch complete video

@SAI_LINGESH

2 жыл бұрын

@@EasyHomeMadeProjects thanks i got the solution

PCB is $4 and shipping is $50 dollar....this is not workable.....Any other solution?