PCB making, PCB prototyping quickly and easy - STEP by STEP

Ғылым және технология

Quick project to show how to easily create your custom PCB at home with help of CNC Wegstr.
- CNC Wegstr machine wegstr.com
- mills for PCB goo.gl/Zrhmfs
- set for PCB wegstr.com/set-for-PCB
- Facebook page goo.gl/pac5bI
Skladba The Life and Death of a Certain
název interpreta Chris Zabriskie
podléhá licenci creativecommons.org/licenses/...
Zdroj: chriszabriskie.com/vendaface/
Umělec: chriszabriskie.com/

Пікірлер: 925

  • @cris33311
    @cris33311 Жыл бұрын

    Back in 2000 as an electronics hobbyist at that time i was designing on paper and making myself the PCBs for fun, electronic door bell, small radios, cable TV amplifiers, etc using nail paint and nitric acid, and as for drilling, i was making the drills manually with a small device. Took me hours to complete something but every time in the end I was so happy that i did another working PCB without any mistakes.

  • @flashyvirtouso7423

    @flashyvirtouso7423

    Жыл бұрын

    kudos to you mate !!! but today it is about monetizing your projects taking on the big guns in this tough economic times

  • @user-ox9yb1qr6l

    @user-ox9yb1qr6l

    Жыл бұрын

    Cris33311 Прямо с языка сорвал . Один в один! Азотную кислоту не применял. Хлорное железо, само собой потом: Перекись водорода+ слабенький р-р HCl _или медный купорос с солью. Получалось просто зашибись. Самое "тяжёлое"- нарисовать красиво, без " соплей"и пропусков. И лаки, у жены украденные, и всевозможные нитрокраски- всё испробовал.. ...давно это было... А лучшего человечество и не придумало... Кроме как травить....

  • @gregorymartzevitch222
    @gregorymartzevitch2224 ай бұрын

    You guys are awesome! I am sure there are people in the galaxy who can afford $3000 PCB machine at home, to play around. Good luck!

  • @Essig911
    @Essig9113 жыл бұрын

    Step 1: Own a CNC machine

  • @Pdrum2

    @Pdrum2

    3 жыл бұрын

    Exactly what I was going to say

  • @ashokmehendale5380

    @ashokmehendale5380

    3 жыл бұрын

    @@Pdrum2 of

  • @sawomirsiwek7558

    @sawomirsiwek7558

    3 жыл бұрын

    It's very easy to short circuit (while soldering) because of small gap between conducted part and "no conducted". Maybe soldering is performed by another CNC ?

  • @AllevatoreAnonimo

    @AllevatoreAnonimo

    3 жыл бұрын

    Step ZERO

  • @sandernieuwenhuizen626

    @sandernieuwenhuizen626

    3 жыл бұрын

    @@sawomirsiwek7558 so you just don't know how to solder?

  • @xprojetos
    @xprojetos3 жыл бұрын

    Muito bom

  • @muhammadhussain7976
    @muhammadhussain79764 жыл бұрын

    Wow, felt so satisfying watching it mill.. great!

  • @alexmartens7567
    @alexmartens75674 жыл бұрын

    I really appreciate you sharing this. It was enjoyable to watch and I got insight on one of my own projects. Thank you!

  • @aaaooaao9949
    @aaaooaao99495 жыл бұрын

    Toll! Werde 'die Tage' wohl erneut mein Glück mit Sprint-Layout versuchen - besten Dank für diese 'How to' Anleitung.

  • @installtekzdotcom9777
    @installtekzdotcom97773 жыл бұрын

    I was in some kind of hypnotic trance watching this. very cool

  • @timblystone2046
    @timblystone20465 жыл бұрын

    Thank God and You, something sane to watch.

  • @TheCode-X
    @TheCode-X4 жыл бұрын

    That is a really clean cut!!!

  • @billyeast6819
    @billyeast68195 жыл бұрын

    Excellent video and music reminiscent of Kraftwerk, Excellent !

  • @YG3BMP-JZ13FLI
    @YG3BMP-JZ13FLI4 жыл бұрын

    Wow .... Thank you for the tutorial, it was very useful for me

  • @gyga3004
    @gyga30045 жыл бұрын

    Да, всё круто! но как то в детстве, ремонтируя мопед, брат вырезал небольшую прокладку из паронита прямо из центра огромного листа. Отец увидев это, отвесил несильный упрек, и сказал, что экономить материал нужно всегда, не известно, когда он может пригодиться, и будет ли возможность его купить.

  • @marijnstollenga1601
    @marijnstollenga16015 жыл бұрын

    Whoever chooses the music for these videos needs a raise.

  • @igorrizvic4699
    @igorrizvic46995 жыл бұрын

    This is really precise work,i love the cnc work..great! :D

  • @paulmoffat9306
    @paulmoffat93065 жыл бұрын

    Quick and easy, if you can spend $10K for the machine.

  • @azumi-osaki

    @azumi-osaki

    5 жыл бұрын

    As everything on youtube and DIY things... "(¬ . ¬)"

  • @blake102989

    @blake102989

    2 жыл бұрын

    you're looking in the wrong places then. Carbide 3D has a machine called Nomad for only 2800

  • @dunndeejones
    @dunndeejones3 жыл бұрын

    The system is good but too expensive for student use.

  • @IleaCristian
    @IleaCristian5 жыл бұрын

    Guys, this is SUPER EXPENSIVE. Search on youtube for "The ANT PCB Maker". An open source PCB CNC machine.

  • @EcuExperto
    @EcuExperto5 жыл бұрын

    El nombre correcto sería , después de 1 año de práctica los PCB en 11 min con la herramienta y conocimientos adecuados , excelente video , me encantó lo profesional , felicidades

  • @boycotatlanta

    @boycotatlanta

    4 жыл бұрын

    Reparacion de centralitas Tu puedes hacer ese tipo de trabajo? Necesito hacer algunos projectos Donde tu vives?

  • @velomotorsgaugerepair
    @velomotorsgaugerepair4 жыл бұрын

    Wonderful

  • @chinoramas1
    @chinoramas14 жыл бұрын

    Satisfying to watch

  • @johnsaunders6510
    @johnsaunders65102 жыл бұрын

    With the music it was mesmerising

  • @szedivaak
    @szedivaak5 жыл бұрын

    Krásná práce!

  • @ericbeckers2673
    @ericbeckers26735 жыл бұрын

    I like it a lot, even the website looks fantastic

  • @electroworld8733
    @electroworld87335 жыл бұрын

    Great video. Thanks

  • @SSGSativa
    @SSGSativa4 жыл бұрын

    So satisfying to watch. Wish I had one of those machines. Hand etching a circuit layout takes longer.

  • @MrfB-br6yh

    @MrfB-br6yh

    2 жыл бұрын

    You can use a presensitized pcb and with some test about uv timing u can have very good results I had successfully made a double sided pcb at home for a flight controller with clearence 0.1mm between traces and pads and all its components is smd. U still need to heat the etching acid so use boiled water and u will be ok I even covered it with a uv solder mask and make a screen printing for the components using a silk screen with white color uv solder mask

  • @SSGSativa

    @SSGSativa

    2 жыл бұрын

    @@MrfB-br6yh Thanks for that info! I'll look into that for the next time I make something. I bet it looks really nice and neat and professional. Thanks again🙏

  • @MrfB-br6yh

    @MrfB-br6yh

    2 жыл бұрын

    @@SSGSativa welcome any time every time

  • @robertnorthrup1914
    @robertnorthrup19144 жыл бұрын

    Nice vid. Gives me hope with my CNC mill. Created board using EasyEDA but not all Gerber files created so a little more work to do. Also building a reflow oven using WalMart toaster oven, an Rocket Scream reflow oven controller+thermocouple and a Solid State Relay. Trial run of oven good.

  • @inventor1978
    @inventor19784 жыл бұрын

    Great ! I DO MAKE IT TO SUN DAY

  • @ernestb.2377
    @ernestb.2377 Жыл бұрын

    Just a joy to watch 😀

  • @sp1derc4t
    @sp1derc4t5 жыл бұрын

    i can watch forever that machine drawing board texture

  • @lutherblisset372
    @lutherblisset3723 жыл бұрын

    wow the vacuum system work very good

  • @crisselectronicprojects8408
    @crisselectronicprojects84085 жыл бұрын

    Thanks for the tutorial! I tested the example on a CNC3018 PRO. There are some adjustments to make but it works well :) 👍 👍👍.

  • @bergarteric5713

    @bergarteric5713

    5 жыл бұрын

    Hello I have a 3018 pro and every thing it's ok for pcb engraving no problem whith the copper you can cut that with the mill tools delivered with the machine ...

  • @dmawzx
    @dmawzx5 жыл бұрын

    ЧПУ конечно крутой, но вот вырезать маленькую платку из середины листа, это трындец!

  • @johncappelletti3332
    @johncappelletti33325 жыл бұрын

    This has to make it into one of those most satisfying video collections on youtube

  • @MrMogomaa
    @MrMogomaa5 жыл бұрын

    This is a wonderful job

  • @neirodrigues4159
    @neirodrigues41594 жыл бұрын

    Very satisfactory vídeo !

  • @marianodiaz461
    @marianodiaz4614 жыл бұрын

    I think that this is what I’m looking for

  • @ryanbareither89
    @ryanbareither894 жыл бұрын

    When I was a kid all we had was a PDP-10 and some ferrous chloride.

  • @graemebrumfitt6668
    @graemebrumfitt66684 жыл бұрын

    Oddly hypnotic TFS, G :)

  • @ederpansani
    @ederpansani5 жыл бұрын

    Very good for prototypes.

  • @SebastianSzafran
    @SebastianSzafran5 жыл бұрын

    Great video, thanks a lot. The PCB is fixed by two supports only, no autoleveling used and traces milled look just perfect. Did you use spring loaded bit here? Or is the bed mounted on springs?

  • @conan7422
    @conan74225 жыл бұрын

    Why placed it in the middle now you have to throw away a lot of the plate?

  • @pietrononame4945
    @pietrononame49452 жыл бұрын

    omg. iT IS SO BEAUTIFUL!

  • @thiagorodriguesdeoliveira5746
    @thiagorodriguesdeoliveira57462 жыл бұрын

    Very nice the fps view. Congrats!

  • @lazlogurzogonas878
    @lazlogurzogonas8785 жыл бұрын

    Assuming that the soldering of the components will be done by people (and not by a robot) the possibility of this process end up resulting in some short circuit point(s) is too great!! You should have programmed the router to remove a larger area of ​​copper around the tracks!

  • @tomasvrkoslav5364
    @tomasvrkoslav53645 жыл бұрын

    Máš to pěkně udělané. Podle toho videa to vypadá že bych to zvládl i já.

  • @cholav9745
    @cholav97454 жыл бұрын

    Excellent very useful for my project

  • @ramybrahim3188
    @ramybrahim31885 жыл бұрын

    thank you from Morocco

  • @bellasanjati5897
    @bellasanjati58973 жыл бұрын

    You are smart dude

  • @johnxisde
    @johnxisde5 жыл бұрын

    So easy when you have a cnc at home haha

  • @PrimiusLovin

    @PrimiusLovin

    5 жыл бұрын

    That's what I was going to say, it's a piece of cake to make PCBs with the 'right tools', aka 'expensive tools'

  • @FragBenitez

    @FragBenitez

    5 жыл бұрын

    Check Root CNC project

  • @kolob204

    @kolob204

    3 жыл бұрын

    U can use just permanent marker and FeCl3, ugly, but cheap and it work

  • @user-jm9or4eh8k

    @user-jm9or4eh8k

    Жыл бұрын

    Так цей станок не дорого коштує, чому ти смієшся? Я живу в Україні, маю маленьку зарплатню і то можу собі дозволити купити такий станок

  • @electric_mix
    @electric_mix5 жыл бұрын

    Wow very good

  • @sssbznzn
    @sssbznzn3 жыл бұрын

    Designing and cut is satisfactory

  • @simonbaxter8001
    @simonbaxter80015 жыл бұрын

    What about a few videos on the machine itself and the software. How do you get other PCB package designs into the CNC?

  • @yongyuthmeemuang
    @yongyuthmeemuang2 жыл бұрын

    Very good ❤️☺️

  • @Albertkallal
    @Albertkallal5 жыл бұрын

    Total flipping on this process. Before was you ink out the connections. Drop in acid and dissolve all the metal off the board. Now no mess and no acid messing around. Absolute brilliant.

  • @maestro_100
    @maestro_10011 ай бұрын

    Amazing Content! Many Thanks!!!

  • @solidstatelightsandsoundrental
    @solidstatelightsandsoundrental4 жыл бұрын

    Wow

  • @OddlyIncredible
    @OddlyIncredible3 жыл бұрын

    I have a desktop CNC machine that will route PCBs (with trace widths down to 8 mils), but it'll also cut parts out of aluminum.

  • @KM-lb2zk

    @KM-lb2zk

    3 жыл бұрын

    Hi 👋 , I also have the same😅, let's connect? OddlyIncredible

  • @houcyhoucy3486
    @houcyhoucy34864 жыл бұрын

    awesome machine, I like it!

  • @krzysztofkozorys516
    @krzysztofkozorys5165 жыл бұрын

    Amazing.Very,very cool 👍

  • @abcknw
    @abcknw5 жыл бұрын

    Fantastic camera arrangement...

  • @ragenestgaming6191
    @ragenestgaming61912 жыл бұрын

    Wish I had one of those machines

  • @UnimaxTechnology
    @UnimaxTechnology3 жыл бұрын

    All Good ...Thanks For Everything

  • @analogalien
    @analogalien5 жыл бұрын

    Great video. Very informative. What PCB design program are you using?

  • @uweschmidt992
    @uweschmidt9925 жыл бұрын

    The tools are very expencive

  • @simonbaxter8001
    @simonbaxter80015 жыл бұрын

    Very nice, but you need to reduce the price of your machines. That is the only thing that puts me off buying or recommending one!

  • @samueljimenez4754
    @samueljimenez47545 жыл бұрын

    Perfecto, buen video, gracias

  • @boycotatlanta

    @boycotatlanta

    4 жыл бұрын

    Longana Tu puedes hacer ese tipo de trabajo? Donde tu vives?

  • @iamZairul
    @iamZairul4 жыл бұрын

    Wow...ty for sharing

  • @Qoow8e1deDgikQ9m3ZG
    @Qoow8e1deDgikQ9m3ZG5 жыл бұрын

    very easy to get short circuit board

  • @fredtaylor9792
    @fredtaylor97927 ай бұрын

    How to build a car: Step 1: Own a car manufacturing plant.

  • @vamosamorir
    @vamosamorir5 жыл бұрын

    Nice and clean

  • @carlosa7979
    @carlosa79795 жыл бұрын

    Muito legal, parabéns.

  • @kushalck4274
    @kushalck42744 жыл бұрын

    Which software' tool can you use

  • @jsthlrd
    @jsthlrd4 жыл бұрын

    Nice machine. Not going to spend that kind of money though.

  • @rikodewantoro
    @rikodewantoro3 жыл бұрын

    PERFECTO 👍🏻

  • @lamoscatube
    @lamoscatube5 жыл бұрын

    beautiful job

  • @sanketdhumal8126
    @sanketdhumal81265 жыл бұрын

    Please make on video how to make the machine

  • @GeoProgrammer
    @GeoProgrammer5 жыл бұрын

    It's cool but I not have money To buy it

  • @FragBenitez
    @FragBenitez5 жыл бұрын

    That was beautiful

  • @t.k.tronix0815
    @t.k.tronix08155 жыл бұрын

    Es ist so schön !

  • @eduardoflores215
    @eduardoflores2155 жыл бұрын

    I don't know what is making but the music sounds nice.

  • @Aurelloyell
    @Aurelloyell4 жыл бұрын

    Ok this is speed run pcb making

  • @embeddedmicrocontroller
    @embeddedmicrocontroller2 жыл бұрын

    Thank you

  • @luizazeredo5197
    @luizazeredo51975 жыл бұрын

    Nossa que perfeição, parabéns, você ensina a usar esse programa da cnc para usar em pcb? e como usa-lo com uma caneta para pintar a pcb nas trilhas? Wow what a perfection, congratulations, do you teach to use that cnc program to use in pcb? and how do you use it with a pen to paint the pcb on the tracks?

  • @Wilson84KS
    @Wilson84KS3 жыл бұрын

    Forgot that it's an add, was wondering about the perfection for a moment.

  • @staplejats
    @staplejats4 жыл бұрын

    Beautiful and totally mesmerising but..... bridging seems more than just possible.

  • @Electheo

    @Electheo

    4 жыл бұрын

    J S not impossible. Wire on non-copper side or 0ohm resistor

  • @user-pg2ip2xu1i

    @user-pg2ip2xu1i

    4 жыл бұрын

    @@Electheo hey no.. He said about unintended bridging

  • @Bianchi77
    @Bianchi772 жыл бұрын

    Keep it up, nice video clip, thank you for sharing the information :)

  • @olvyshh147
    @olvyshh1475 жыл бұрын

    Perfecto!

  • @emremutlu44
    @emremutlu445 жыл бұрын

    Use a 100pin TQFP next time at least, if you want to show off with the machine.

  • @WEGSTRCNC

    @WEGSTRCNC

    5 жыл бұрын

    ok no problem :)

  • @erculete
    @erculete5 жыл бұрын

    Muy buena maquina, lastima que sea tan cara. Like.

  • @boycotatlanta

    @boycotatlanta

    4 жыл бұрын

    El Mago Tu puedes hacer ese tipo de trabajo? Donde tu vives?

  • @Jotaruiz30
    @Jotaruiz305 жыл бұрын

    beautiful video

  • @syeddawarahmed
    @syeddawarahmed4 жыл бұрын

    Wow Exillent work

  • @CuriousTinkering
    @CuriousTinkering3 жыл бұрын

    Back in the day we used permanent markers, masking tape, and some hydrogen peroxide

  • @any123-og
    @any123-og5 жыл бұрын

    Why does this have 2m views Did youtube recommend it to everyone

  • @kibromzeru8803
    @kibromzeru88034 жыл бұрын

    i am satisfied more thanks very much

  • @chikovers
    @chikovers5 жыл бұрын

    so satisfying

  • @acsse1975
    @acsse19755 жыл бұрын

    Buenos días desde México, como se llama la primera broca que usaste para las pistas

  • @boycotatlanta

    @boycotatlanta

    4 жыл бұрын

    Benjamin Tu puedes hacer ese tipo de trabajo? Necesito hacer algunos projectos Donde tu vives?

  • @alerey4363
    @alerey4363 Жыл бұрын

    misleading video title: it should contain "expensive" as it involves the use of a commercial CNC tooling machine; a laser engraver is way cheaper and yields comparable precission and quality results

  • @mattyd_gaming7425

    @mattyd_gaming7425

    Жыл бұрын

    If you have a cheap 3d printer around adding a motor and small engraving bit is a prettycheap option. Should cost around ~200$ to get you the same results!

  • @daitedve1984

    @daitedve1984

    Жыл бұрын

    @@mattyd_gaming7425 Not sure 3D printer has enough strength to keep routing motor.

  • @wallpapermusique

    @wallpapermusique

    10 ай бұрын

    Only a very high power (expensive) laser engraver will cut copper clad.

  • @MrShivamgautam1
    @MrShivamgautam15 жыл бұрын

    It's a machine of my dreams ❤️

  • @michaelsenior6812

    @michaelsenior6812

    5 жыл бұрын

    I wonder why he cut the design from the middle ( think about it)

  • @marciobadin8832
    @marciobadin88324 жыл бұрын

    Sprint Layout The Best Program for Drawing Boards

Келесі