Depending on the thickness of the clear coat spray,you might have issues with the buttons sticking I always sand down the holes before I put the controller back together,helps with buttons not sticking

@potatogym4980

Жыл бұрын

Is the clear coat even neeeded?

@potatogym4980

Жыл бұрын

If so what should I use?

@ReignofPain512

Жыл бұрын

@@potatogym4980 it depends on the paint used,I usually put couple coats of clear coats ,wait couple days then wetsand it ,then polish it out

@potatogym4980

Жыл бұрын

@@ReignofPain512 I’m using the Angelus paint

Sand your primer, guys. I did autobody for years, lots of experience painting. Something like this I'd just scuff the primer with scotch-brite and you gotta remember to clean it. In autobody we use a product called paint prep but you can use Windex or soapy water. If you're going to spray color on it sanding and cleaning is important.

@ADHD_PLAYZgames

2 күн бұрын

How do I sand it? I've never done this

This video inspired me a lot. I used to be a great great artist then stopped, so I want to see what I can create after years of not doing anything. I'm buying paints and everything right now lol

Bulldog adhesion primer is wise. Use 1500 grit WET sand paper. Dry will scratch. Let coats of clear flash for at least 30. Wet sand again, repeat accouple more times,.

@AngelusBrand

2 жыл бұрын

Agreed and we missed that part of it with the needing "Wet" sandpaper. We will add it in the notes! Thanks for catching it.

@veronicadeevers3246

2 жыл бұрын

@Nicholas Malovrh yes, most likely. I have always used Bulldog. Automotive stores carry that as well. Also in rattle-can. Allow for plenty of flash time. Always try new adventures on something that is a throw away item that isn't important.

@nickmalovrh213

2 жыл бұрын

@@veronicadeevers3246 Thank you! Going to do a custom LV controller. It's brand new...wish me luck haha

@veronicadeevers3246

2 жыл бұрын

@@nickmalovrh213 Yikes! Best of luck. Make a video of it and share with us please.

@nickmalovrh213

2 жыл бұрын

@@veronicadeevers3246 Will do!

Hella dope idea. Love to see more tbh. Go nuts on old used controllers. Genius level 100 achieved.

If you could create more "how to shadow with paint videos" that would be amazing please! 😊 I haven't tried shadowing yet because I'm not confident enough.

Amazing job Sophie your first time custom a game remote control this dope happy holiday

@AngelusBrand

2 жыл бұрын

We are trying to just have fun with it! Our paint is used for controllers, murals, motorcycles, and so much more than just shoes.

Great job! Love the percentages on the screen! 👏

@AngelusBrand

2 жыл бұрын

Glad you pointed that out. We will try to keep that consistent!

Sweet custom Xbox controller Angelus!!!!

Loved it! Good job, nice presentation. Happy trials, Cheers!

@AngelusBrand

2 жыл бұрын

Thank you!

i made that design on my xbox controller when I was I kid and still into customising controllers, twas a fun part of life

@AngelusBrand

2 жыл бұрын

Share some photos with us if you still have it!!

Very dope

C'est très satisfaisant !

If you put a layer of white first, and then put another color on it, do it like this, it will be brittle or strong.

I want to attempt to recreate the Phantom Xbox One controllers. If I chose a clear plastic faceplate to paint should I still sand it down? Also, is it okay to not apply primer? I plan to paint some solid color on half and leave the rest clear, I'm not sure how to approach it.

Awesome!! I'm about to paint an acrylic frame, this was the perfect intro!! So if i have Too Hard, I can do without the primer? Thanks for the inspiration!!

@AngelusBrand

2 жыл бұрын

Correct! however if this is just for a frame that will be hung and really not touched, you can forgo both.

@beachlurk

2 жыл бұрын

@@AngelusBrand It will be used as a coaster, so it will be handled.

Do you advise priming in between painted coats?

Can you be more specific to supplies used here? Like the exact primer and finish spray brand?

🔥🔥🔥🔥

Hey loved the controller and video.. was this inspired by Homer and the Simpson?

on my red xbox controller, two lines fell on the floor after it slipped from my hand. Is there a way to fix the damaged part because it is the first controller I have ever bought. I mean, can I paint that part or change the frame of the controller?

delicious 😋

Do I do wet sandpaper for priming too?

These are awesome! I am using the 2-hard right now on Air Force 1 soles, experimenting with the results. Does anyone have a magic suggestion on the best product to use for keeping custom shoes forever sealed(no future maintenance on soles needed)

@Aphrxdite

2 жыл бұрын

Painting the soles is not recommended for shoes that aren’t going to be display pieces because no matter what you do, the paint will inevitably crack and peel off. There’s no true way to adhere paint to the rubber material unfortunately): For the leather parts of the shoe, good prepping and a few thin layers of 4-coat will do the trick!

@AngelusBrand

2 жыл бұрын

We never suggest painting hard rubber soles. If painting rubber was easy you would see custom cars running around with bright colored tires all over the place. Rubber just does not have paint adhere to it at all.

what paints did you use?

Hey do you want to see what I did with your paints especially the Neons

What primer would you suggest for controller plastic?

@xTymezz

Жыл бұрын

Dupli color adhesion promoter I’d say

I wanna make this on my Xbox controller, but with airbrush but I'm wondering do I have to use 2-hard and 2-thin mixed with the paint? 🤔 Since 2 hard is used for hard surfaces and 2 thin to make the paint more liquid for the airbrush :'v

@AngelusBrand

Жыл бұрын

You can just use the 2-Hard within the paint.

Is the the 2 hard even necessary? If the paint cures properly and we add the clear this should help avoid chipping right?

@xvxcarmona8990

2 жыл бұрын

Yes! The 2-hard is necessary, the surface is plastic so the 2-hard helps to paint to be durable in this type of material

@norbzlopez7819

2 жыл бұрын

@@xvxcarmona8990 isnt the primer applied to make the paint hold therefore bypassing any issue w the paint and the plastic might have orinally have?

@AngelusBrand

2 жыл бұрын

@@norbzlopez7819 Hey actually no the 2-hard isn't 100% necessary. We just like to go over board if necessary. Some people do not even use primer or an adhesion promoter and it works great. We just like to go overboard so there is no question that it worked or not.

💖💖💖💖💖💖💖

Ive been using angelus varnish on hard surfaces all this time. Hmm is it not recommended?

@AngelusBrand

2 жыл бұрын

It depends on the surface. This surface is rubbed so much our customer who do controllers for a living suggested to have it coated with a clear coat on top. Especially on a really hard plastic like this. We have had people do less prep and post work and have it turn out fine but we like to overkill in case.

id like to try this myself, i know this is stupid to ask but what kind of paint are yea using to color the controler? sorry i just want to be able to do this the right way is all

@AngelusBrand

Жыл бұрын

Hi there! She is using "Angelus Brand". We have many videos to help you along the way!

@QuetzalToon005

Жыл бұрын

@@AngelusBrand i checked out your site, it a lot of it reffers to leather products so they can be used on plastic as well?

What clear coat brand and sealer do you recommend?

@AngelusBrand

4 ай бұрын

Totally up to you and what type of sheen you like.

Will the paint scratch or come off over time from sweaty hands?

@AngelusBrand

2 жыл бұрын

It shouldn't. Maybe clean the controller often.

Hey Sophie do u have a website where Ican purchase some stencils from

@AngelusBrand

2 жыл бұрын

Hit up her IG. I believe she does.

What grit sand paper do you recommend?

@AngelusBrand

2 жыл бұрын

Wet 1500-2000 for fixing blemishes.

I wonder how long the paint job lasted. Anyone tried it yet?

Yes I’ll order a bakers dozen please 🧑‍🍳 🍩 🎮

@AngelusBrand

2 жыл бұрын

Look at this person with 13 friends to play with 😭

What's the name of the spray you are using as clear coat? 🤔

@AngelusBrand

9 ай бұрын

Sorry, we cannot see the name of that brand.

Was this the same Sophie on instant influencer? I was rooting for her the whole time.

@AngelusBrand

2 жыл бұрын

Correct! she is. She has been around a while. We really appreciate her work.

😇🥰😇

Hi, love your work. Would you be interested painting my remote control surfboard?

How do you get the paint to look so smooth n flat 😮‍💨

@AngelusBrand

Жыл бұрын

Usually after 3-5 thin layers, the paint self levels nicely.

What clear coat do y’all use

@AngelusBrand

Жыл бұрын

We have a few choices form Flat to Matte to Satin or High Gloss!

Where do you get this kind of paint?

@AngelusBrand

2 жыл бұрын

Try www.angelusdirect.com

Does the paint wear off over time? How has this help up ?

@AngelusBrand

4 ай бұрын

As with anything painted, wear and tear can play a part. It really depends on the user.

I would never be able to do this

@AngelusBrand

Жыл бұрын

Never say never!!

Guitar pic to detach side panels or debit card

@AngelusBrand

5 ай бұрын

Good advice!

What kind of paint is this?

@AngelusBrand

Жыл бұрын

Angelus Brand Paints. 😁

smh at artists not knowing basic color theory. this would look so much better if you wouldn't have used grey for shading!

@dalylahpatrick2170

2 жыл бұрын

Everyone starts somewhere. That really wasn’t serious enough for you to be upset enough to comment

@gilli4899

2 жыл бұрын

@@dalylahpatrick2170 maybe I could've wrote it a little nicer (tried to be constructive), and I apologize if it came out rude, but if it's on angelus channel I assume it's not a starting artist, and if it's a tutorial - like this - then it's important for people to see this comment and do their own research

@AngelusBrand

2 жыл бұрын

Hey we feature quite a bit of different artists on here who all have their ways of doing it. That is the fun part about art there are 100s of ways to attack something.