David Jones, you are absolutely the best in the business...... Thank you, so much for your knowledge......

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Thank you! Exactly what I was trying to figure out.

great video, thanks for taking the time to make and post it!

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Very good video instruction. I am learning about duct work in school now, and this really helped give a better understanding. Thank you sir for posting this.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Thanks for taking time to make the video. Proper education is a must. It helped me out.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Great video and duct tutorial David !! Take care, Brett

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Very good explanation of how to seal duct work

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

You da man Jones! I'm in my first semester. Thanks

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

@resandor

3 жыл бұрын

6 years later Im now a residential appliance refrigeration tech. 💪

Yes that would be sufficient, the air handler itself has insulation wrap inside as long as there are no space between the duct board and air handler it should be ok. Thanks for asking.

Amazing David I'm fan from IRAQ

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Well done

thanks finaly some one who is a good hands on trainer

Awesome video

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Thank you

Thanks you.

I am glad it helped..

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Great video

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

That's a real nice box, I'm curious why you are making triangles?

I have a question about applying mastic inside the duct work? Can I do that just to get a better seal? Would it sweat inside and catch mold?

Dave, Good video.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

I hope you find this video helpful...thanks for watching from Jones Air Conditioning & Electric in Naples, FL!

@BrycePelletier

5 жыл бұрын

5 Years later... Thanks for the basic how to. I needed this today for my plenum rebuild. They are stuffing 4 ton system into a single 12" round attached to my garage ceiling that I am to fix myself.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

ANy concerns with Fiberglass Lined (Linacoustic) metal ducts with mold growth. Would really appreciate the feedback.

do i need to treat exposed fiber glass duct when it has been cut on a 90 degree to accommodate a register ?

thanks....

Is it normal practice to make registers out of this material?? All but two registers at my house are metal. On those 2, the yellow fibers are exposed when they cut the opening on the main duct. Should the yellow fibers be exposed?? Wondering if some of those fibers might become loose and contaminate things inside house.

Very good.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

David Jones video have taught me a lot. I was looking for videos about roof mounted hvac ducts. Living in Palm Springs, CA and my duct layout is absolutely WRONG. I want to correct it. 2.5 ton York air with only 3 ducts connected (there are 6 total available) in a 1400 sq. ft. house. 😕 help. Are there videos explaining roof top ducting?

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Thank you! Great video, does anyone sell a kit with duct board, a shiplap tool and that combat dagger you're using?

@jaywillow9927

5 жыл бұрын

Dude, think about this. Are you going to install a duct system that a mouse can chew thru and crawl up in and die? Then they'll have to rip out every bit of duct. Dude, get a metal trunkline, and if you cannot afford to hire the guys who'll fabricate your ductwork and make custom fittings for the best airflow, at least buy the cheap ass roundpipe, snap it together, screw and tape it with mastic tape ( it's thick rubber tape with a silver coating covering the outside), and it's thick as hell. If you can't afford THAT, screw it together, get a tub of duct seal, run duct seal over the joint and after it dries, run 3 coats of duct tape around every joint. Fuck ductboard. I did ductwork for 5 years and learned how to fabricate fittings in a sheetmetal shop. Only problem with THAT is guys like this come out and the customer hires their half ass because he's cheaper, ALOT cheaper. He won't tell them how shitty ductboard is, he'll slap it in. Do it right and take pride in the fact you gave the customer metal, and you gave them the best airflow possible, and hire a sheetmetal fab guy. Oh, that's right, he wouldn't want to pay him. Guys like him ruin HVAC and make it NOT a trade or skill anymore. "hehehe, lets slap this ductboard in and make 3 grand". Yea, fucker. Fuck him. Put in metal and use duct seal and you ain't gotta worry about tape coming off. Seriously. Do it right. This dude is a piece of shit. You put this shit in someone's home and you're a fucking asshole, a dishonest asshole out trying to make a dollar.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

I enjoyed your video and thanks for taking the time to make it. On a south florida home w a updraft air handler; using QUIET 1 1/2 board; how do u actually attach the duct board to the top of the air handler? A guy was out here w a V groove paddle & made the square duct. It was only a foot tall till it hit the supply trunk. He just had the 1" vapor barrier flaps foil taped to the top of the air handler. I THINK he put spray adhesive first. He then covered is all in mastic. Is this sufficient?

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

You don't have to mastic ur mixing boxes unless your putting collars in it and running flex from the collar to the boot

We always pookie the seams ( grooves) then stapled the flaps and tape them so that shit is solid when it dries and will not come apart

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

What are you hanging blue board

What he did is ok, the directions are for sheet metal installation, there should be no noise with the duct board.

Because I was reading the manual that came w the tempstar and it talked about this, it said Secure duct to flange using proper fasteners for type of duct used, and seal duct−to−unit. Use flexible, then it said Use flexible connectors between duct work & unit to prevent transmission of vibration. Now I know the top of the air handler is only a foot from the ceiling, but is what he did OK ? so, he has spray adhesive under the vapor barrier tabs on top of the handler, then foil tape, then mastic.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Good video. I have duct system that has several 90 degree turns and big gaps. I don’t have access to the outside only the inside. How can I properly seal it form the inside? Tape, paste, insulation foam, caulk?? Thank you

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Is there a special tool to make that step where the top will rest? Show us how you do it. This video was very informative, thank you.

@jonesacnaples

4 жыл бұрын

Yes use a tool called a ship lap tool

@jonesacnaples

4 жыл бұрын

I have a video on a shiplap tool Look at it and will explain how to put the stuff together thanks

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Thanx!

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Can i use this to create an air tight seal for all my lights in my attic? Would this be safe? I pretty much want to make a box and but over the lights. Then caulk around the bottom.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Man, I wish you guys were here at Cape Cod in MA. I pulled out about 2 gallons of water out of my ducts in the attic on my AC system. Water was everywhere from the air handler to the last flex duct. The main duct is metal wrapped with rFoil r-4. That bubble wrap stuff. The attic is a walk in attic that gets up to 100 degrees. The heating system is not a duct system, just AC. I just recently had all the ducts replaced and have never had a problem. The AC system has always been maintained and is working well. Any ideas?

@hazzardlobotomy7904

7 жыл бұрын

nld1960 Any bubble wrap alone should never be used in an attic. R8 blanket insulation wrapped metal duct should now be considered minimal for duct in attic. Think about an insulated attic with the now required R50 insulation.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

I have a 3 ton unit with a 20x25 return register, this is undersized according to your calculations, correct?

@mance7996

5 жыл бұрын

Paul Fullerton that’s enough,as long as you keeping it clean..

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

Thanks hope helped.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Which model/shape is better for air-duct box, triangle or square box?

@blackericdenice

Жыл бұрын

Square

Would you please give an advice? I just find out the return box on my hot attic is made of metal and there is no insulation around. So it is just bare metal box. How can I seal it since it is very hot up there. Thanks

@jonesacnaples

7 жыл бұрын

replace it or rewrap with insulation

@donnybeeson1990

6 жыл бұрын

David Le wrap it

@metalpeck

5 жыл бұрын

Don't listen to this guy and Duct wrap it.

@HsingSun

3 жыл бұрын

Wait until winter to do such job. I planned to do my own soon. It is too expensive to hire contractor.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

How would hot air get in if the pressure inside the duct it higher due to the fan then outside atmospheric pressure?

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

El papel se va a despegar y hundir con el tiempo, se hace mejor pasando la cuchilla negra de machembrado en el tape 😊 y nunca nunca nunca al conducto final 😊

my ductwork in the ceiling is rattling. What is the cause and how do I fix the problem. HELP!!!

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Where do I buy this material?

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Hope it helped.

@felipeballi7679

10 жыл бұрын

Great class will show my guys at work

@jonesacnaples

7 жыл бұрын

thank you I appreciate you watching

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Your duct work is under sized, or tape has come loose. If you hear air blowing duct system is under sized. Replace it

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html Q

duct board is crap! try getting it cleaned without shredding the inside. give me wrapped metal.

@MrEskorpion

7 жыл бұрын

Hey Joe, so what do you recomend?? any video

@hazzardlobotomy7904

7 жыл бұрын

MrEskorpion insulated metal duct is permanent. Duct board will fall apart with duct cleaning.

@angelaboyd5233

7 жыл бұрын

Joe Sommers Your using the wrong duct cleaning machine.

@hazzardlobotomy7904

7 жыл бұрын

Angela Reamy Too fragile will breakdown.

@angelaboyd5233

7 жыл бұрын

Joe Sommers not a chance. use a duct cleaner every day. got to use the right machine.

Duct board looks good when its new but take a look at it 10 years later

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Sir I am air conditioner duct fitter you have vacancy I am experience 15 years girl country in Kuwait

How to correctly assemble duct board.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

mmmmKay

@adamstewart7465

7 жыл бұрын

I'm not a fiber guy, but I did learn something. I generally use fiberboard to make a plenum distribution box out of a trunk system I ripped out. a half gallon of duct sealer says my boxes will never come apart. but I never thought of Staples, Thanks

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

This makes me itchy

Your using the wrong duct cleaning machine.

@jonesacnaples

7 жыл бұрын

that was hand made

@angelaboyd5233

7 жыл бұрын

cleaning not duct cutter.

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A

Whatever.... u spend a lot time,money go buy it a metal Y

@SpaceGhost182

Жыл бұрын

Duct board isnt up to code in most states anymore, it was always cheap garbage. 10 times outta 10 it looks better in tin.

That’s duct board buddy we use real sheet metal up north that junk should be outlawed that shit is only down south no skills in that why don’t you try to use real 16 gauge sheet metal and get a drill lose the tape cause that shit I hate it thank god north of New York you don’t ever see it and if so some hack put it in.

I only see these boxes down south. Up here in new England we run a trunk and do take offs off from there.you shouldn't have more then 7 feet of flex in a run,you guys do the whole house in flex it is a horrible job.why do you guys flex everything and use those stupid boxes. I know you dont believe me but it is wrong. Why all flex ?

THIS CRAP WAS ORIGINALLY MADE TO WRAP METAL DUCT, it is shit for duct alone

give me sheet metal anyday over that cancerous duck duck board shit.

Thank you

thanks....

@SardarTariqMahmood

3 жыл бұрын

kzread.info/dash/bejne/f4iMtbqFYbOZZ5c.html A