This video show converting a Ford 8in Differential into a Yukon Dura Grip Positraction with 28 Spline Axles. #Classiccars#Project#Restore
Жүктеу.....
Пікірлер: 31
@charlesvictorrose3 ай бұрын
I'm not a "car guy" but i night an old international pick-up truck to fix up. I've done a TON of work to it. Awesome videos like this have helped a ton to ease my anxiety when taking on projects i have to place taking on. Your video is clear and informative. Thank you!
@dairleautoclassicrestorati6892
3 ай бұрын
Thank you and good luck on your Restoration Sir! 👍🏽
@MaverickTangentАй бұрын
Man. I know this is 2 years old, but I've been wanting to do the same thing on my 66 Galaxie. I appreciate the info.
@dairleautoclassicrestorati6892
Ай бұрын
Time flys,Flys, I have not done much to it since. I guess it's never to late to start on the galaxie
@MaverickTangent
Ай бұрын
@@dairleautoclassicrestorati6892 life happens
@Eco.boost2.7 Жыл бұрын
Liked the video man, but next time instead of hitting those bearings on; instead freeze the bearing and heat the shaft with a torch and that thing will slide on like butter👌🏻. No reason to beat yourself up hitting that and possibly messing up the bearing…
@Eco.boost2.7
Жыл бұрын
You did nothing wrong just there is easier ways of doing it.
@warrenglover3 ай бұрын
Hi I just got this .. I'm watching your video..
@michaelmeraz6556 Жыл бұрын
Enjoyed the video,it was helpful.thank u and keep up the great work God bless you brother...
@dairleautoclassicrestorati6892
Жыл бұрын
Great! 👍🏽
@HerooYoui2 жыл бұрын
Keep up the good work and thank you.
@dairleautoclassicrestorati6892
2 жыл бұрын
Thank You very much!
@johnr291811 ай бұрын
Awesome video, thanks much!
@johnskorupa1364 Жыл бұрын
Great video,thanks.
@johnschroeder31724 ай бұрын
Excellent video bud...well done
@dairleautoclassicrestorati6892
4 ай бұрын
Thank you!
@randyhorton83695 ай бұрын
Very informative, thank you!
@dairleautoclassicrestorati6892
5 ай бұрын
Thank you!
@jward9637 Жыл бұрын
Good job!👏👏👏
@fjwipff5 ай бұрын
Thanks for sharing
@drabolit Жыл бұрын
Very helpful thank you
@dairleautoclassicrestorati6892
Жыл бұрын
Thank you!
@CARSONBOARD2 жыл бұрын
Hi great video! I'm building a 66 Mustang with 8 inch rear end like yours. I don't know what type off posi diff I should get I going to use the car for driving to car shows and meet but also plan to road race the car. I need something thats good for turning too. Do you have any recommendations?
@dairleautoclassicrestorati6892
2 жыл бұрын
Great question! I have converted my 70 Mustang with a Dana 8in Differential. It's o-k but What I don't like adout it. When I make a sharp right turn. The right rear wheel will spin. But if I make a sharp left turn it works fine. So I try not to give it too much gas turning right. I called Dana and the guy told me that he never heard of that problem. I find that work to believe. This is why I decided to try the Yukon Differential. So we will see😄
@jamesmarchione920 Жыл бұрын
nice
@GWAR19822 жыл бұрын
Where do you reference all the torque specifications ?
Пікірлер: 31
I'm not a "car guy" but i night an old international pick-up truck to fix up. I've done a TON of work to it. Awesome videos like this have helped a ton to ease my anxiety when taking on projects i have to place taking on. Your video is clear and informative. Thank you!
@dairleautoclassicrestorati6892
3 ай бұрын
Thank you and good luck on your Restoration Sir! 👍🏽
Man. I know this is 2 years old, but I've been wanting to do the same thing on my 66 Galaxie. I appreciate the info.
@dairleautoclassicrestorati6892
Ай бұрын
Time flys,Flys, I have not done much to it since. I guess it's never to late to start on the galaxie
@MaverickTangent
Ай бұрын
@@dairleautoclassicrestorati6892 life happens
Liked the video man, but next time instead of hitting those bearings on; instead freeze the bearing and heat the shaft with a torch and that thing will slide on like butter👌🏻. No reason to beat yourself up hitting that and possibly messing up the bearing…
@Eco.boost2.7
Жыл бұрын
You did nothing wrong just there is easier ways of doing it.
Hi I just got this .. I'm watching your video..
Enjoyed the video,it was helpful.thank u and keep up the great work God bless you brother...
@dairleautoclassicrestorati6892
Жыл бұрын
Great! 👍🏽
Keep up the good work and thank you.
@dairleautoclassicrestorati6892
2 жыл бұрын
Thank You very much!
Awesome video, thanks much!
Great video,thanks.
Excellent video bud...well done
@dairleautoclassicrestorati6892
4 ай бұрын
Thank you!
Very informative, thank you!
@dairleautoclassicrestorati6892
5 ай бұрын
Thank you!
Good job!👏👏👏
Thanks for sharing
Very helpful thank you
@dairleautoclassicrestorati6892
Жыл бұрын
Thank you!
Hi great video! I'm building a 66 Mustang with 8 inch rear end like yours. I don't know what type off posi diff I should get I going to use the car for driving to car shows and meet but also plan to road race the car. I need something thats good for turning too. Do you have any recommendations?
@dairleautoclassicrestorati6892
2 жыл бұрын
Great question! I have converted my 70 Mustang with a Dana 8in Differential. It's o-k but What I don't like adout it. When I make a sharp right turn. The right rear wheel will spin. But if I make a sharp left turn it works fine. So I try not to give it too much gas turning right. I called Dana and the guy told me that he never heard of that problem. I find that work to believe. This is why I decided to try the Yukon Differential. So we will see😄
nice
Where do you reference all the torque specifications ?
@dairleautoclassicrestorati6892
2 жыл бұрын
www.differentials.com/technical-help-2/set-up-specs/
excellent video thank you
@dairleautoclassicrestorati6892
7 ай бұрын
Thank you!
A hot plate and a freezer and them bearings will damn near fall on the journal , just saying .
@dairleautoclassicrestorati6892
Жыл бұрын
👍🏽