Aren't they horrible! I've seen exit holes in things but didn't realise how bad the infestation gets. Great video Michael.

. Several years ago I had a radio that had minor woodworm. I took every thing out leaving just the cabinet .I let it dry for several days and put it all back together . . I wrapped it up in a plastic bag and put it away for a few years . On opening the bag the woodworm treatment had obviously not completely dried. It had turned all the lettering on the dial glass a slime coloured green and discoloured some components.Just be careful . I found out the hard way . I have stocked up on treatment . Solvent based like your using is not easy to get as it’s being replaced by water based and not so good . My father always used to say to me woodworm prefer plywood as they like the glue. Don’t know if there is any truth in that . Great video as always

@michaeldranfield7140

Ай бұрын

Not sure about plywood but you could well be right, a friend once told me woodworm wont eat chipboard due to the glue content but the other week I picked up a TV with chipboard cabinet and woodworm holes .

@helenbenjafield7351

Ай бұрын

Yes,the beetles love the glue used in plywood.

I knew an antique dealer whose shop had been infested by wood worm. It was a real nightmare to clean up. Good thing you are taking it seriously.😊

@michaeldranfield7140

Ай бұрын

Have to take it seriously, got a lot of radios and TV s in here and more importantly loft roof is all timber .

I feel a bit daft as I did not know they flew !! makes sense really lol, great vid

@michaeldranfield7140

Ай бұрын

just like a caterpillar changes into a butterfly the woodworm make the same transformation into a fly.

Hi Michael, i'm allmoust sure that if you insulate the wood in a plastic bag and increase the temperature you will kill them all inside, they do that with termites. Insects cant sweat so they cant regulate the internal temperature, they will die. Maybe this can be done in this case also. Greetings from Portugal 🇵🇹

@helenbenjafield7351

Ай бұрын

Maybe,because they can only thrive in damp conditions.

I was thinking, “How is showing them videos of themselves going to help?”

Yet another extremely interesting and educational video - thank you for sharing it with us. My home is completely free from woodworm however I have known woodworm to infest floor joists in houses resulting in the weakening and collapse of entire floors in buildings. Getting rid of them is a terrible problem - "woodworm smokes" are available to treat entire buildings however on polished wood surfaces - like a radio cabinet - Rentokil FC20 Classic Wax Polish is very effective at preventing woodworm and what's more it polishes the wood at the same time!

@michaeldranfield7140

Ай бұрын

Interesting I will look into the rentokill polish, we lived in an old victorian house when I was little and I remember my dad saying he put things under the floorboards that smoked for killing woodworm .

@OaklynHall

Ай бұрын

@@michaeldranfield7140 Actually the Rentokil polish is, by my reckoning, the best polish for old furniture not even taking into consideration the woodworm protection element - try it on some old polished wood and see hows it brings out the shine!

So So interesting Michael ! I haven't seen any of these in my workshop & certainly don't want to. Thank You for this Video, excellent ! Cheers

@michaeldranfield7140

Ай бұрын

you dont usually see them until its too late .

Why couldn’t you put the cabinet in an oven set to about 140 degrees F for an hour or two? I doubt the wood worms would survive that, and there wouldn’t be any problems with chemicals.

@beefchicken

Ай бұрын

That’s how pallets are often treated when they’re to be used for export. If the pallet is marked “HT”, it’s been bunged in the oven.

@dimitrismaster

Ай бұрын

Pallets are heat treated for strength,not worm killing.Since they are mostly made of cheap softwood such as pine,they need heat treatment for the wood fibers to harden.Dunno the effects on lacquered plywood cabinet.​@@beefchicken

@beefchicken

Ай бұрын

@@dimitrismaster sorry mate you’re wrong there. Pine that has dried naturally is just as strong as kiln dried pine. They kiln dry pine to make the process take a couple days instead of 3 months, not because it magically makes it stronger. But a nice added benefit of kiln dried lumber is that the heat also kills any bugs, hich is why in North America, any lumber bearing the NLGA KD-HT mark is permitted to use for export where pallets treated against pests are required. You can argue with me more or just google it yourself.

@gatekeeper65

Ай бұрын

@@beefchicken Absolutely correct.

@dimitrismaster

Ай бұрын

@@beefchicken I'm not gonna argue,ill take your word for it.I ain't a lumber expert nor a carpenter,the heat treatment process about giving strength,is sth I read on wikipedia,or on another web site, if I remember correctly.

Good video for anyone who repairs wood cabinet tv or electronic items

@michaeldranfield7140

Ай бұрын

Many thanks for the comment .

Super interesting ,another great video 👍🏻🇬🇧

@michaeldranfield7140

Ай бұрын

Many thanks for that .

good evening Michael , another great video , 🙂

@michaeldranfield7140

Ай бұрын

Many thanks for that .

Really fascinating Michael I never knew what they were like thanks for the upload 😊

@michaeldranfield7140

Ай бұрын

Many thanks for that .

Very interessting, thank you 😊

@michaeldranfield7140

Ай бұрын

Many thanks for that .

4:00 "That's moths on me jumper!" I had moths under my floor boards. I think they're eating the woolen insulation on the central heating pipes!

@michaeldranfield7140

Ай бұрын

I need to look into this , that was an expensive jumper !

About 70 years ago when I was a spotty youth, I had a very old wind-up acoustic record player, a floor standing job it was. One day I was playing an old 78rpm record and there was a large clutter and one of the legs just fell off. On examination, the lower parts of the unit and legs were full of wood worm holes. Well, beyond repair.

@michaeldranfield7140

Ай бұрын

that was the problem with this quite collectable record player , the cabinet was so bad you could push your finger thorough it .

I always thought woodworm were tiny, not these gorged fat slugs!!! Fascinating video and some very interesting comments as well. Seems like a very good thorough solution.

@michaeldranfield7140

Ай бұрын

a thing I have noticed by the exit holes some are a lot bigger than others although I don't know what the significance is , poss some male , some female ??

WOW! i am surprised how BIG these are in the UK. On Land they appear much MUCH smaller. At least in central europe.

@dimitrismaster

Ай бұрын

Island gigantism.Just thank the Lord they didn't grow to gigantic proportions like some 80s b movie.

@michaeldranfield7140

Ай бұрын

they certainly made a mess of the record player , it was just turning to dust .

Very interesting .we used to put cabinets with wood worm in a bag than then in a freezer for 3 weeks. not sure if this had any effect but the old guy i worked for at the time ,swar by it

hate these things. I've just had to put a nice Strad radio out because it started in there after a few years of being dormant. It was one of the few radios I didnt treat. I use the gallon cans of Sika woodworm killer from Screwfix or Toolstation, I forget. They hatched out in a portacabin so I fumigated it with an old ICI Fumite smoke firework.

Great video Michael may you be wormless soon

@michaeldranfield7140

Ай бұрын

Hoping so , the trouble is you don't realise you have woodworm until they pop out .

All it takes is one repair to be infested with them and if you don't notice it by the time it has been returned to the customer, chances are your workshop will be infested, and they can the find their way into other items in wood cabinets. A good reeason for inspecting any item carefully when it first arrives.

@michaeldranfield7140

Ай бұрын

I have heard that they lay eggs in the cracks and crevices around the edges so I am assuming this is the place to do an initial inspection for any holes ?

@Barbarapape

Ай бұрын

@@michaeldranfield7140 The worst items i have found for been infected are the cabinets that are covered in rexine or vynl wrap, they hide underneath it and you only find out when they leave a trail of wood dust by then the cabinet will start to fall apart. One thing they don't like is Jeyes fliud, the smell seems to stop them in their tracks

Blithering things!!

Please can you give us some advice on how to get rid of moths too?

@michaeldranfield7140

Ай бұрын

this is something I am going to have to look into , that was an expensive marks and spencer jumper !

@OaklynHall

Ай бұрын

@@michaeldranfield7140 Please do some research and let us know as moths are problematic in my home too!

Horrible things, got a PYE qac3 with some in, doused the thing in rentokill solvent based stuff, seems ok now,i have heard that putting the cabinet in the deep freezer can kill them, never tried it though!.

@michaeldranfield7140

Ай бұрын

quite possible , I also hear baking in an oven has the same effect but could well destroy the cabinet .

Interesting video. I would like to see the beetles in more detail so I can recognize any I see. Living in the USA, lots of houses are made of wood, so these woodworm cause a serious threat to a house. Thank you.

@chattonlad9382

Ай бұрын

I think the latin name is Anobium Punctatum, if I've got the spelling right.

@michaeldranfield7140

Ай бұрын

according to the internet there are many different varieties so in the USA you might have different ones to the UK , but yes you wouldn't want these in a house made of wood .

I wasn't aware of these miserable little buggers. Are they only indigenous to certain areas ? I've been servicing stuff for almost 45 years now, and I've never encountered any.

@michaeldranfield7140

Ай бұрын

I don't actually know the answer to this but I have read there are many different varieties so its quite possible the answer to your question is yes .

They no doubt need oxygen. You could purge the radio with CO2 during the clingfilm wrapping! It probably wouldn't be contained by the clingfilm for more than a few days. Perhaps drop the wrapped & CO2ed radio into a good polythene bag with the opening sealed at the top. (CO2 is heavy). Or plumb all the treated radios into a constant trickle feed of CO2. I use "Pub" CO2 for MIG welding. A full pub size bottle was about £15. (2 years ago). The regulator can be more expensive. I got a cheep used one from eBay.

@alanm8932

Ай бұрын

Another thought on oxygen... There are probably things you could put inside the radio that would "use up" any available oxygen inside. (Not a candle!) I'm not familiar with what form that would take. Maybe some sort of container where you peel off a seal to activate it? Maybe even just iron filings but keep them away from the speaker!

@michaeldranfield7140

Ай бұрын

@@alanm8932 like a getter in a thermionic valve .

@michaeldranfield7140

Ай бұрын

Never thought of that , I have C02

@alanm8932

Ай бұрын

@@michaeldranfield7140 if you ever get any wriggles on the loose, like you showed in this video, you could put them in a jam jar with CO2 & see how long they last. Perhaps at the same time, put some others in a jam jar with air, for comparison.

Its a facinating video. Ive had these things in my brick built shed for over 30 years and they keep coming back. All the shelving collapsed and i had to resort to not storing any wooden items in there. 3 years ago I found a trace in the airing cupboard of the house itself. They must have flown. Everyone should be well educated on the behaviour of these things, i found out the hard way. Heaven forbid if tbey get beneath the floorboards. What about if the grubs that spilled out on the floor get wedged between the treads on the soles of your shoes and you took them home? Would they die? I'm assuming they'd have to be in fly form to spread. How far can they fly? Many questions. I shall keep this video marked for future reference, as when you see pictures its not the same as seeing it in our real environmrnt and hsving it explained to you. At least all of our future electronic enthusiasts will not encounter any wooden items. Only last week i had the chance of buying a1959 philips 17 inch set and I walked away. Marvellous.

@michaeldranfield7140

Ай бұрын

from my own examination I have found the grub , once removed from a hole will not attempt to make a new hole , even when placed on another piece wood, I dont know how far they fly but I have heard they always fly towards light and after emerging as a fly they only have a few weeks to live , I have come up with another idea I might try just in case , one of those sticky fly traps hanging up in the workshop but illuminated by a white LED light , this should catch any activity in the night.

Coming upon the next video... I'll be dealing with clothes moths! I threw away 3 radio cabinets recently. The first I noticed was little deposits of pale dust around the radio. Then I saw the clusters of holes. Such a shame.

@michaeldranfield7140

Ай бұрын

I need to sort the moth problem , that was an expensive jumper ! I generally don't like scrapping things but the record player was just turning to dust , you could just push your finger though it .

@colintinker7778

Ай бұрын

@@michaeldranfield7140 I'll bet many radios have been thrown because of woodworm. A few years back I had a battery valve set with woodworm in it. I removed the cabinet and put it in the corner of the garage for about a year. When I saw it later it had fallen apart.. and just like your example was like mush!

Hello. You have video on you channel, about solid state el84. Can you send me on mail, schematic your project? I interesting guitar devices building, and first time seen solid state sl84 in all internet!

@michaeldranfield7140

Ай бұрын

Sorry I wouldn't know where to look now as its a long time ago but it was based loosely on the solid state PL802 I think it was .

@pavellysovliveindemos

Ай бұрын

Ok. Thanks!

very interesting , they wouldnt make a very good pet then ? lol

@michaeldranfield7140

Ай бұрын

no , they have all shrivelled up now !