Hello Friends!!! Pls Like 👍 & Share this video with your friends. Don’t Forget to Subscribe.it's 🆓💯 🔔📢 kzread.info Take Care.😀 Lots of Love 💗💗💗 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

@sharifpulparambil

4 жыл бұрын

hey can u give me ur whatsapp?? i will be going to extend mine. but is very confusing

I've watched 30 videos on connecting two routers with wires. This is the only one that was not Lan to Lan but Lan to Wan. After hours of struggling this solved the issue and allowed me to connect the secondary router to the setup. What made it more difficult for me was that my primary router is a SIM card router too, so no other source of internet either, had to connect to the WAN. This helped, will save and like the video.

@torababdullah7952

3 жыл бұрын

this link worked for me. explained everything. i did that and worked perfectly. kzread.info/dash/bejne/fGmFrMRsf5Sfqqw.html

@rabnawaz7220

2 жыл бұрын

@@torababdullah7952 for a

@rabnawaz7220

2 жыл бұрын

@@torababdullah7952 for

@rabnawaz7220

2 жыл бұрын

@@torababdullah7952 for

@rabnawaz7220

2 жыл бұрын

@@torababdullah7952 for

Must Watch ➡ इस video में wifi से जुडी बहोत सी technical बाते है जो आपको इससे पहले शायद ही पता होगी ➡ kzread.info/dash/bejne/jK57o5Ruga-aY8o.html 🛒Buy Best Seller WiFi Router From Below link :- 🟩TP-Link TL-WR845N 300Mbps Wireless-N Router amzn.to/3e19S7u 🟩D-Link DIR-615 Wireless-N300 Router (Not a Modem) amzn.to/30mCCC7 🟩TP-Link TL-WR841N 300Mbps Wireless N amzn.to/2MUqSQO 🟩TP-LINK TL-WR840N 300Mbps Wireless N Router amzn.to/3e1aoSY 🟩TP-Link Archer C20 AC750 Wireless Dual Band Router amzn.to/3fgbNoX 🟩TP-Link Archer C6 Gigabit MU-MIMO Wireless Router, Dual Band 1200 Mbps Wi-Fi Speed amzn.to/2MP7pkA 🟩Tenda AC10 1200Mbps Wireless Smart Dual-Band Gigabit WiFi Router amzn.to/3fCeS3p 🟩D-Link DIR-841 - AC1200 MU-MIMO Wi-Fi Gigabit Router with Fast Ethernet LAN Ports amzn.to/3fxDbiN 🟩TP-Link Archer C50 AC1200 Dual Band Wireless Cable Router, Wi-Fi Speed Up to 867 Mbps/5 GHz + 300 Mbps/2.4 GHz, Supports Parental Control, Guest Wi-Fi, VPN amzn.to/3eGJkI1 🟩TP-Link TL-WR820N 300 Mbps Speed Wireless WiFi Router, Easy Setup, IPv6 Compatible, Supports Parent Control, Guest Network, Multi-Mode Wi-Fi Router amzn.to/2ZGeCLf 🟩TP-LINK TL-WR840N 300Mbps Wireless N Router (Not a Modem) amzn.to/30gD0Cc 🟩TP-LINK TL-WR940N Wireless-N450 Home Router (Not a Modem) amzn.to/397jUSI

For those who are curious like I was: You can use this method as a network switch on top of its Wifi extending capabilities! Great video, helped a ton!

@isaaccisneros9778

2 жыл бұрын

Hello, what do you mean by network switch?

Thank you so much for this vid! Super helpful 🙌 More power to you Local Guy!

bro thanks for the help it worked like a charm I had a router lying around just like that it helped me move from my top floor to ground floor due to internet accessibilty now at all floors thanks buddy

Liked and subscribed !

Many youtuber connect it to wan port .... But your method is 101% Right to setup it.... simply.

Thanks @local guy. I was able to set up my extended router.

You set them on two networks. How do you access the one from the other?

@BlackMamba-lt8oe

2 жыл бұрын

@Sushmita Jaiswal what if both the router are of different company

Can I connect a wired extended router at 100m distance? Coz I have 2 homes, one where I do work from home from 8 pm to 6 am after that no one stays there hence Wi-Fi remains unused in the day time. Approximately at the distance of 100 meters, I stay with my family. So I want to extend my wifi to my home where my family members can use the wifi, in the daytime. So please, assist I'm paying the full amount but only I can able to use it only between 8 pm to 6 am,

@shivakandagatla32

2 жыл бұрын

I'm also looking answer for same question.. Is the length of the wire (100 metres approximately) gonna effect the speed?

Very clear explanation. Thanks a lot :-)

Perfect 👍! Straight to the point! Thanks 🙏

In a lot of video shown the DHCP should be disabled in the extended router but here in this video both routers have DHCP enabled but subnets different hence allocation of IPs has no issue . Can you pls explain elaborately how both DHCP will work.

@localguy

3 жыл бұрын

here i used wan port so two different network created,hence to dhcp server for each network. if connected to lan port then both routers will be on same one network.so only one router will act as dhcp server.

good information

This guy sounds like a Windows Tech Support Scammer in India. Just kidding, thanks for the info.

@localguy

4 жыл бұрын

Thanks!!! Pls Like 👍 & Share. Don’t Forget to Subscribe. 🔔📢 kzread.info 👤Connect with me on Social Media @LocalGuyTech 📌Facebook@LocalGuyTech ➡ facebook.com/LocalGuyTech 📌Twitter@LocalGuyTech ➡ twitter.com/LocalGuyTech 📌Instagram@LocalGuyTech ➡ instagram.com/LocalGuyTech

@mayankgupta9376

3 жыл бұрын

War has been started for less 😂😂😂😂😂

@jasdsb

3 жыл бұрын

Probably his ex workplace

@techieboii

2 жыл бұрын

Right true

@adiayushgaming8538

2 жыл бұрын

We all sounds as him but not all are scammers

What color coding for utp cable did you use on router to router? Straight through or crossover? Thanks!

@localguy

3 жыл бұрын

Cross over. Btw Now a days Routers comes with auto mdi/mdix features allowing both cross and straight. Thanks.

This video is very helpful for me i have seen a lot of video but not proved helpful for me but this video is really helpful for me that is why i have subscribe this channel and thanks to local guy channel for such a awesome and helpful video.

Excellent! No shit only business. Great video, demonstration

Thank you,

can we have seem less connection between main router wifi and extended router wifi ? if not there we always need to select manually between two routers which is same as wifi extender like tp link. Is there a way of seemless connection between wifi ranges of main router and extended one? . only mesh router is the option ?

It direct works on my TPLink router once I auto detect the dynamic IP, no settings needed on the subnet Thank you Local Guy :D After referring multiple sites and youtube videos but still failed, your video solved my issue directly

Thankyou so much 🔥❤️

What? I should connect the LAN cable to the Root Router's Lan port and then the END of the cable to the WAN port of the SECONDARY Router? But I saw on the other videos that I should connect it also on the secondary router's lan port. Please tell the exact answer

@Ishmam_Dhrubo

4 жыл бұрын

I don't think you're right. It's wrong. I should've connected it LAN to LAN

@shasamad93

4 жыл бұрын

Lan to lan it wont work... Cause there's a pattern of input and output... If u selct both side output then from where the secondary router will collect data from internet... I mean ping... Lan port means output... Wan port means input for thr router..

@localguy

4 жыл бұрын

btw that's AP Mode you are talking about i.e Lan to lan.this video is for all routers.new routers supports different types of working mode like Router Mode,Access Point Mode Range Extender Mode,Repeater,Bride Mode,WISP Mode.and some old routers supports only router mode. by default all routers are in router mode. In this video it's router mode.two different subnets.

@localguy

4 жыл бұрын

No. it's not like that.if you want to use router as AP access point then connect cable to Lan port.new routers supports different types of working mode like Router Mode,Access Point Mode Range Extender Mode,Repeater,Bride Mode,WISP Mode.in this video it's router mode.cable connected to wan port.two different subnet created.

I watch so much video to connect lan to wlan but ur video help me 🙏🙏🙏

Thanks i have connected 2 routers successfully, but the speed of the 2nd Router is only 30~35 Mbps in a 250 Mbps connection, is there something can be done to increase the speed in the 2nd router

@amarjeetmann5800

2 жыл бұрын

Use the latest CAT cable and ensure that your 2nd router is a dual band router. The range of dual band router is less on 5Ghz but the speed is awesome. I am assuming you have a fibre connection at your home.

I have connected two routers via Lan port. If you connect to wan port, you need to configure different subnet mask, which is not a good idea for dhcp.

Quick question, can the extender routers lan ports be used aswell as wireless ?

I have two computers and one routers.... Should I buy one long Ethernet cable attach both computes in one routers??? And after that do I wanted to change settings in computer for passing net into both computers?

Thanks maan

thank you it helped me a lot

Your video is very helpful! Thank you!! So is there any way to connect to the other extended wifi automatically? I have to manually connect to my other wifi router manually :( have the same ssid on both routers. Thank you

Good

Nice video

Thanks

It worked thanx

Wow I didn't think it's complicated it's hard to follow

Sir, I have one question, hope you will reply, my root router is of 2.4ghz can i use extended router of dual band? Iam getting low speed on wifi on my current router & getting proper speed on lan, so by this method can i get good speed by using dual band router as extended router?

@preetishkumarnayak9061

3 жыл бұрын

Yes if you are connecting your dual band router via LAN cable to the main router. Then yes you will get good speeds on 5ghz wifi. But extending it wirelessly won't be that fruitful for you.

Sir is there any speed down during conecting a router to my main router ...suppose i have 50 mbps plan .. how much speed i got from my 2nd router after connecting in my main router

@tejpalsinhvihol7752

3 жыл бұрын

speed differnce will be about 2-3 mbps

Excellent video, it helped me . Thank you very much.

my house have 3 floor. in ground floor have 1 router which is main. I have put extended router in second floor and extended from main router. my question is for third router on third floor. should I extend from extended router from second floor or from main router? which is better and which pros and cons ?

@arjunlal6669

2 жыл бұрын

You can take the connection from 2 floor to 3 rd.. connect the lan cable to Lan port 1 (second floor) to Lanport 1 (third floor).. simple

This video is very helpful..... short simple and it works 🤟🤟

it worked thanks a lot!

Great video. Though, it would be best to state different networks are created.

Thank you so much, You saved my day ❤

@localguy

9 ай бұрын

Glad it helped!

Thank you so much bro .... For helping

@localguy

Жыл бұрын

Always welcome

I have dual band router fiber connection and using Archer A6 as an extender but to my dismay the Archer A6 doesn't make any difference in connection speeds whatsoever. Given the short length of the CAT 5E cable it can only be placed near to the root fiber router which renders it unutilized. Any Suggestions?

Quick question , wouldn’t you need to use a cross over cable since your connecting 2 routers together ?

@localguy

2 жыл бұрын

Now a days router comes with auto mdi/mdix port.so not to worry. Thanks

@thierrylaborde_6097

2 жыл бұрын

@@localguy thanks for the clarification

extremely detailed video. thankyou so much for making and sharing the video

Problem is i can't login to the admin page of the 2nd router when i type 192.168.1.1 i get directed to the admin page of the 1st router and not the 2nd router. Then how can i disable dhcp of 2nd router if i can't logon to its admin page? Pls help🥺🥺

@PRAEFECTVSMAGNVSXXXIII

3 жыл бұрын

You need to connect with the internet cable of the router you want to change the options on your PC

Very helpful, thanks!

Berry good ma man

Hii. Can I limite the bandwidth & amount of data to extended router? Plz help.🙏 & If it's possible how todo this?

SUperb WOrks 1000%%

So i should buy the same brand primary router to use a secondary router? Or i can buy any brands?

Awesome Video. Sorted my issue. Thanks a mil

thank you!!!!!

Thanks for info... I need to do set for 2nd router..... I don't know assigning ip.. Can you guide

So it’s Roots Lan to secondary’s Wan, correct? After this would I be able to connect multiple ethernets to secondary router without causing too much traffic on the ethernet that is currently bridging the two routers?

Do we need to rest the second router before configuration, as I was using ACT internet connection previously in TPLink router. Now I have taken HATHWAY internet connection. Pls confirm

Wow thanks

Thanks man, very nicely explained

Here I have to power on root router if i want to use extended router. Is there a way to power on any one of the router based on the need?

Can it work on Jio/Airtel fibre? Want to buy it for office work and office have more space than usual for one router. Send your thoughts, thank you.

Quick question, but if I have an AX router and my extender router is an AC router, am I limited to the slower speed of the AC router?

@localguy

2 жыл бұрын

802.11ac supports upto 1.34gbps datarate(on 80mhz channel) and upto 2.34gbps datarate speed (on 160mhz channel) so if isp speed is below than that nothing to worry. But for internal local Network it will affect. Thanks.

HI , thanks for the tutorial in this tutorial How should i configure the "range extender" ?? as an access point or range extender or a router ?? will this work for any mode i mean

@localguy

4 жыл бұрын

if you want to use router as AP access point then connect cable to Lan port.new routers supports different types of working mode like Router Mode,Access Point Mode Range Extender Mode,Repeater,Bride Mode,WISP Mode.in this video it's router mode.cable connected to wan port.two different subnet created.

@parkavij3077

3 жыл бұрын

@@localguy hi

@parkavij3077

3 жыл бұрын

@@localguy I am planning to use my old router as an extender if I get an Ethernet cable is that enough

Can you attach a USB hard drive to the extended router for NAS? I'd like to maintain 2 separate USB hard drives for NAS in 2 different location for redundancy. One on the home router and the other on the extended router in my outbuilding.

Very nice Video... Can I connect 1 more sub router via sub router? I have one connection and want to connect 2 sub router so that I will have full rang on 1st 2nd and 3rd flor.... please advise me

@localguy

2 жыл бұрын

Yes it will work. Thanks

Hello There want a quick help Can u tell me which cable is that blue one ( I also want to buy a ethernet cable for my router to connect pc) Thank you pls reply 💓

@localguy

4 жыл бұрын

You can buy cat5 cat6 cable

at 3:37 -- what if my d-link router doesnot have wireless password/pin on the backside ? 2 days ago I got bsnl ftth connection and I want to make use of my old router as a extender. could you please tell me what cable I need to buy? thanks in advance.

the rout router is from my internet provider and that's the router am connected to right now, but I don't have access to its setup page, and I want to get a new router to connect to each other, will it affect it if I not enable DHCP server?

If I do this can I access wifi of main and extender routers? And at the same time can i use both routers' LAN ports to connect to internet using my devices (i.e. laptops, computers)?

Great Tutorial, Thanks buddy

Thanks for sharing

I want to keep the Wifi credential and SSID same as main router like wireless extender. So that i don't have to switch my wifi network. It is possible? I guess this happens in large hotels

To those making tech scammer jokes here: If you're going to offend a billion people, at least make sure the joke is funny - an Indian

Tq so much sir🥰

Thanks for using English.. really helpful

@localguy

3 жыл бұрын

Where are you from?

Can we use 2 pair cat6 cable for connecting 2 routers by this method

@localguy

2 жыл бұрын

Yes you can. Thanks

Is it necessary to use a router of the same company? Or both the router can be of different companies?

@localguy

2 жыл бұрын

No. you can use any. Thanks

Thanks A whole bunch, you saved my life.

Well done to you. This was awesome too watch and comments show that. You are much appreciated thanks for the time spent. Wish you all the success on your channel. Will save and like.

@localguy

2 жыл бұрын

Thanks

thaanx it helps a lot can you please tell how to change main router to dual band i dont want to extend i just want to change router how to do it please reply.

thank you so much dada..

Thank you for this amazing video helped a lot 👍🏻

Great video. It was really helpful. I have a question. What should be the maximum length of lan cable? For 50 meters lan cable wt should be the configaration.

@localguy

2 жыл бұрын

Cat cable supports up to 100m. Thanks

Can I connect 2nd router ( use this as a extender ) without any wire ? wireless?

Helo brother my main router is tenda ac1200 and repeater is tplink wr850n.. so my question is will the settings be the same as you have told in the video??

@local guy sir.. what could be Maximum distance between those two router?...

@localguy

3 жыл бұрын

100m. Thanks

I wanna ask if we can connect 2 routers via LAN? I have an old tenda modem from airtel. I wanna used it as an extender. However, it doesn't has a WAN port. It old has DSL Kindly help me out

I did a LAN to LAN connection and there was a compromise in speed,will your method solve that ?

Why do we need to choose a different subnet from the WAN subnet ? Also I have an ADSL router as extender router so can I use it to connect to my root router ?

@localguy

4 жыл бұрын

You can connect ADSL router to main router kzread.info/dash/bejne/e6ybl6SJqtK0ZLA.html

Brother I have configured tp link tlwa701nd model for bridge with AP mode, the internet is working properly but now I'm not able to access the login page of tp link router. I have changed the IP address also but still can't access to router. I have watched so many videos on KZread but only on my router the problem is persisting.

Great tutorial! Am I able to have my devices automatically connect between the stronger signals or will it have to be done manually?

@localguy

2 жыл бұрын

Newer devices will connect to stronger signal auto.if not then you can use 3rd party app from playstore. Thanks

@squashed1995

2 жыл бұрын

@@localguy Is it possible to connect the cable from my primary routers WAN port to secondary routers LAN port? Will it work the same?

My router is at least 30 meters away from the main router can I get that long LAN cable? Cost is gonna be high, will it be a good idea, or can fiber optical cable can be used? Please help me out.

@localguy

2 жыл бұрын

Fiber will be expensive, instead use lan cable . Thanks

Just resetting the new router worked for me

@neeltej4123

3 жыл бұрын

Yes... It works that way ! Simple !

Why have you connected threads to the antenna port of black tp link router?

i did connect a extender router,but the thing is i am losing half of my bandwith like my main modemrouter can do 200mps on 5ghz band and 200mps on ethernet but when i connect extender router my speed cuts down to about 92 on my extender router but still im getting 200mps on root router .Im using cat 5e cable

Does the speed decreases in both as network is being shared or does it give orignal same speed on the root at well as extended router?? Please reply sir

@localguy

3 жыл бұрын

Speed depends on number of users accessing the internet. If one one active user you will get full speed. Thanks

I have a static IP as i am using internet for my work which required to whitelist my IP so how to i do in DCH Server setting? Thanks in advance