best video ever. it took me 4-5 tries to find someone just hooking them up. everyone else's videos looked like Lian LI promotional videos and I just wanted to see how to properly hook them up. thank you for your service 💓

@TheProvokedPrawn

Жыл бұрын

Thanks Gary. Glad to help, hope you enjoyed enough to subscribe 🦐

@TheRockford22

Жыл бұрын

Same boat! This helped a lot since the 3 groups of 3 with a single in the rear was exactly the setup I’m looking at. Only question is if I get a single pack for the rear will that still connect to the controller or no?

@HydrixTheory

Жыл бұрын

omg same i could either only get the rgb to work or just the fans to spin not both it was frustrating

@theblackghost4246

Жыл бұрын

@@TheProvokedPrawn I’m confused, do I gotta connect the 3 pin 5v rgb header AND the usb to the motherboard or can I only have the 5v 3 pin connected?

@GuidoDePalma

Жыл бұрын

@@TheRockford22 yes but using one of the (4) cable that comes with the 3 pack.

I cannot describe how grateful I am to find this video and being able to enjoy this channel... Insanely helpful that you actually walked through each part of the fan package and how to set them up.

@TheProvokedPrawn

Жыл бұрын

Glad to found it helpful. Hope you enjoyed enough to subscribe 🦐

Dude thank you for this. Was going crazy trying to find more connections on my motherboard as the 2 were already full. Life saver for a newb on his first build!

Thank you for the very thorough video. I have made my own custom cables for the fans which involed new wires and soldering to the fan header connections. I tested my system but the fans were not spinning. In half panic that I have done something wrong and potentially fried my fans, I searched the internet if anyone else experienced this phenomenon. Your video came up and was able to answer my question and I could continue with the build. Nice instructional btw, and probably will come in handy for many!

@TheProvokedPrawn

Жыл бұрын

Fantastic! Glad to hear it. Hope you appreciated enough to sub.

i was confused on what i needed to have plugged in and you cleared it up. thx

I cannot explain in words how happy and grateful I am, thank you so much for explaining this.

@TheProvokedPrawn

Жыл бұрын

You're welcome. Glad to help. Say thanks by smashing subscribe, join or indeed, super thanks! :)

Time to pull my case apart and redo EVERYTHING. I think I need this Lian Li controller

I cant tell which is more cleanly done.. the fans OR the video! Very clear overview 👍

@TheProvokedPrawn

4 ай бұрын

Glad you enjoyed it! Hope you appreciated enough to subscribe 🦐

Thanx for taking the difficulty out of this install for beginners like myself. I have a lian li 2 case so i was thinking of new fans and lian li make the connectability very easy. Great vid mate, keep it up!

@TheProvokedPrawn

Жыл бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

lol thank you so much i was gonna give up on my first build bc i didn't know where tf the wires to the fans went and you just saved my life thank you so much

I’m setting these up in my new case tomorrow, thanks for the great video. Subbed

I recently got the V2 uni fans and the Galahad aio 360 and I love them. Your video was a big help.

@TheProvokedPrawn

Жыл бұрын

Glad to help!

Awesome videos bro! Just finished my build, your lian li uni fans guides carried me through :D thanks again and keep up the good work, you are helping a lot of people

@TheProvokedPrawn

Жыл бұрын

Glad to help Silvio

@user-vo2wc4qk5b

5 ай бұрын

​@@TheProvokedPrawnHey, great video , but can I connect 3 × triple pack fans = 9 fans if I only have 1 argb headers on my motherboard. PLEASE REPLY

@nathancooke5269

5 ай бұрын

Yes you can, you can do up to 4 sets of 4 (16 fans) total on just 1 of the controller boxes and that controller box only needs 1 usb header (MB), 1 fan header (MB) 1 rgb header (MB) and 2 sata cables (power supply)​@user-vo2wc4qk5b

@nathancooke5269

5 ай бұрын

​@@user-vo2wc4qk5b not sure if it tagged you or not

I'm about to set up my fans and this is the most helpful video! Thank you!✌️

@TheProvokedPrawn

Жыл бұрын

Thanks for watching. Hope you enjoyed enough to subscribe! :)

This video made me get the fans. Also, thank you for showing how they all work. This video saved me time. Thank you!

@TheProvokedPrawn

Жыл бұрын

Glad to help Sir Randall 👍

I got 12 fans in my case 😂 my wallet about to really hurt with these fans but thank you so much for being the only one to actually answer my question about the control and the amount i can plug into it

@zeiadosamaahmedngi3390

2 ай бұрын

Can you help me i don't undersrand how to control the fans using l connect software and not using motherboard software

im loving the look of these fans and wouldn't mind upgrading to them sometime soon

@TheProvokedPrawn

Жыл бұрын

They're great

I was just desperate to understand better how many USB, RGB and fans connections I would need to use 9 infinity fans, you just saved my life bro

@TheProvokedPrawn

9 ай бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

Thank you so much for this video. I've been trying to do more research on these fans before I decided to buy them. You were the only one bothered to do this

@TheProvokedPrawn

2 ай бұрын

Glad I could help!

Brilliant video thank you! Excited to try and set mine up now

@TheProvokedPrawn

Жыл бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

Thank you for this video. I’m going to build my first pc and your channel is a huge help. Subbed!

@TheProvokedPrawn

Жыл бұрын

Thanks Jonathan, I'm glad to help.

Bought two 3-packs and they came with splitters for the controller-to-fan plugs. Which means you can connect two sets of two into one of the controller plugs. Crazy how much thought they put into this product. Hands down the easiest fans to work with.

@dhplayground

Жыл бұрын

Yeah, I just bought 7(2 packs + single) and I m very impress with what came in the boxes, more cables then I will ever need. Thinking of buying another 3 pack and replacing my Galahad fans too now.

@twinstars8812

Жыл бұрын

Does that mean you can have 5 sets of fans plugged into 1 controller? (with 2 sets of the fan using the splitter and only occupying 1 slot on the controller) Thanks!

@tehMilcho

Жыл бұрын

Beware the power limits there are reports of burned splitters because of overloading it.

@Mike8827

Жыл бұрын

@@twinstars8812 i think the maximum amount of fans is 16. however , if running that many fans on one controller , I would plug in the second SATA cable for sure .

@Mike8827

Жыл бұрын

Did you buy the SL Infinity version? Or SL V2? For my infinity fans i don’t see a splitter cable …

I just used this video to build my first pc! I just wanted to say thank you!

@TheProvokedPrawn

Жыл бұрын

Glad I could help! Hope you appreciated enough to subscribe 🦐

@gowhop

Жыл бұрын

@@TheProvokedPrawn Absolutely! I've been a Sub for a while now, and your videos never cease to be helpful. Thank you again.

This helped a ton I was testing the fans on a makeshift rig out of old parts and was wondering why they weren’t spinning when I turned it on.

@TheProvokedPrawn

Жыл бұрын

Glad to help. Thanks for watching. Hope you enjoyed enough to subscribe! :)

At this point, with all the reviews and tutorials, I might master how to setup the fans even though I don't have a single pack. Still waiting to be available in my country. Great vid though!

@TheProvokedPrawn

Жыл бұрын

Hope you get them soon!

This is like, perfect. Every question and thought I had along the way was answered in perfect order. I'm just happy this video exists. It gives me hope lol

@TheProvokedPrawn

8 ай бұрын

Glad to help. Return the favour by subscribing 🦐

Thank you for explaining the rgb to mobo plugs

@TheProvokedPrawn

Жыл бұрын

No problem 👍

worth noting, that you get the thick connector (from the triple box) 3 times total. so if you have a 3x3 + 1 setup you will be missing 1 cable for the single fan. so if you play on doing more than 3 groups, buy 2 triple boxes

@GuidoDePalma

Жыл бұрын

they give 4 cables, not 3 :)

Thank you so much for this tutorial!

@TheProvokedPrawn

Жыл бұрын

You're welcome. Subscribe to show the love.

just built my first pc and was worried I did something wrong installing these fans but when I got to the part where you said Dont worry, install L Connect and the fans will spin, what a relief 😂 just downloading Windows now and getting ready to stick it in the new pc. thanks for the video, def the most accurate video on how to install these fans. You got my sub!!! And not trying to be weird, but your voice is extremely soothing 😂😂😂 I felt very relaxed watching this vid. thanks again bro🦾😎👍

@TheProvokedPrawn

Жыл бұрын

Happy to help!

@maxkruppa3716

5 сағат бұрын

The RGB lighting only works after you boot into Windows and then download the L-Connect software?

thanks this video was super useful, im trying to get my hands on 9 120s, and 3 140s, but its like the 140s dont exist i cant find then anywhere

Thanks for the Video. Was easy to understand and helped me out alot!

@TheProvokedPrawn

8 ай бұрын

Glad to help you out 👍

very well explained my friend ty so much. I don't need 1/2 the stuff I thought I needed. just the fans 🙂

@TheProvokedPrawn

28 күн бұрын

Glad it helped

thank u i m building my fist pc and i was needing some tips and u helped me a lot im really grateful

@TheProvokedPrawn

Ай бұрын

Glad to help. You might find this playlist useful too - How to build a gaming PC: kzread.info/head/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z

🙂 neat, thx for explaining the wiring

can you use a y-splitter to connect a single fan to a row of 3 so back extract & the 3 fans on the top of the case & then connect it to the control box in the back ???

The only disappointing thing about the 3 pack, was the manual, had to scrape up the info here and there to find out the controller's capabilities. Wish I would of found this video an hour ago ;)

just saying: very thoughtful of lian li to create daisy chained fans because their cases need a lot of fans

That was an extremely helpful video

@TheProvokedPrawn

2 ай бұрын

Glad it was helpful!

Best guide and explanation ever

@TheProvokedPrawn

Ай бұрын

Glad you think so! Hope you enjoyed enough to subscribe 🦐

@almouallimifamily339

Ай бұрын

Sure thing, I just realized I didn't but when I came back to vid cuz i wanted to ask u, i have galahad 2 trinity radiator and UNI SL fan and TL LCD fan, the question is can i use the controller of the uni sl fans with the tl lcd ?

hey, great video. Quick question. How many of this connection cables do you get with this? Enough to connect these 4 groups of fans?

Fantastic video, keep up the good work. Liked and subscribed

@TheProvokedPrawn

4 ай бұрын

Thanks a lot!

Wonderful explanation. Thanks !

@TheProvokedPrawn

6 ай бұрын

You are welcome! Hope you enjoyed enough to subscribe.

Helpful video! And believe it or not i did connect them wrong 😅

That knife.. is adorable.

@TheProvokedPrawn

Жыл бұрын

No one is getting shanked by it. That's for sure.

Bro. Bro. SO useful man! Great video!! It helped me out a TON :)

@TheProvokedPrawn

6 ай бұрын

Glad it helped! Hope you enjoyed enough to subscribe 🦐

Hey there! Thanks for the vid Iit will definitely help me a lot when I eventually build my pc. My question is is it possible to connect 9 fans like 3 3pack with 3 fans as an aio, 3 (connected together) as intake and the last 3 is separated into 1-2 fans. Is that possible to power since I will have 1 120 size fan space on the rear and 2 120 in the bottom. Is that possible? Case is hyte y60 researched how mount 3 fans on the side so there will be 3 on the side 3 on top with radiator(aio) and 2 in the basement 1 in rear

sh*t dude... your voice is made for audio books! pure gold!

@TheProvokedPrawn

9 ай бұрын

Thanks. Hopefully people like it for KZread too

Thanks for the video Prawn! I have 2 groups of 4 and after I downloaded L connect 3 the top fan in both strings quit lightning up, the fans still work and I can change the speed, but no RGB and just in the one fan on each..?

Mate that mini pocket knife is the cutest knife I've seen lol

@TheProvokedPrawn

Жыл бұрын

It's a Wish special 😂

Thanks for the video. This is super helpful. Quick question, if I replace an GPU AIO fan with these Liam li fans, where would I connect the fan control? I know just like cpu aio I can connect into the sync slot for rgb control.

Hey! Thank for the video, as I see you are using ROG STRIX motherboard in the last part, so the LL hub will let you control these fans in the Armory Crate and will detect as separate chassis fans (groups) ? At the moment I have AL model of fans, and I had them plugged to the PWM motherboard header directly, as the motherboard could not detect them in the bios.

Thanks ~ relevant info. 👍👍

Damn nice fans! I'll be buying them

Thanks for clarifying the fans not spinning on start up. I thought I bent a pin or something.

@TheProvokedPrawn

Жыл бұрын

It was a panic for me too 🤣 apparently it's because of the fact the fans can go to zero rpm and so that's what they default to

Great guide! Does the triple pack of fans come with multiple of the 2in1 power and RGB connections? (the flat connector that connects to the box) So for the 10 fan setup demo'd in the video, I would be able to buy a single triple pack, and 7 single fans, and have all I need to connect them all? Thanks!

Great vid, very informative. Hoping you or someone else can answer this: if I had the controller hub and wanted to forgo using L-Connect by connecting the PWM and RGB cables to separate controllers instead (in my case, an Aquacomputer Octo and Farbwerk), how exactly does control work for the fans? Would the controllers detect all the fans connected to the hub as one fan and thus mirror settings across all fans? Or will all the fans be recognized individually, allowing for individual speed and RGB control?

Thank you for the great video. Regards the controller in theory if you have OL11 Dynamic XL, same 10x SL Infinity 120 arrangement as your video (3xfan group side, bottom, Galahad 360 top and single rear) both 24 & (3x8 gpu) strimer V2 cables. How do you connect the fans, strimers & Cooler controllers or would one of these triple fan pack controllers manage to link & control everything? Would it be the Galahad in sync 1 and the strimer controller in sync 2? Thanks again

I have the Air Mini case as well! Trying to setup it up exactly as yours. So it's 5 sets of fans with 2 controllers. All fans are going to the controllers, and controllers to motherboard right? Is it possible to have all 5 sets of fan plugged into 1 controller (using a splitter for 2 of those sets), on Lian Li's manual it seems doable, have you tried? Thanks!!

Hi! i love ur videos, ur voice is so calm. can u add like timestamps in the description? that would be very helpful

@TheProvokedPrawn

Жыл бұрын

I want to but it takes so much extra time, time that I could spend making more videos. 😭

@punchspelledbackwards

Жыл бұрын

@@TheProvokedPrawn Makes sense

How are you supposed to set all this up if your mobo only has 1 3PIN connector. I have an Asus ROG Strix B550-F Gaming Wifi II board.

@almouallimifamily339

Ай бұрын

Me too, im out of i/O

Hey mate, awesome video, really helpful! Is it possible to use the controller without the Micro USB cable? I have all fans plugged in, 3 groups of 3, one solo for exhaust, into the controller ports, the PWM and ARGB connectors plugged into my board, and ignored the Micro USB cable because I didn't want to use LConnect. However, when I turned on my system, no RGB came through for the fans, but they were all spinning. Is that the reason why, not using the Micro USB? Thanks in advance!!

How do you connect a single fan to the sync on the hub? The 3 pin layout on the fan and the hub is different.

Thank you for this. I have 3 sets of fans like in this video, except my AIO cooler is the Galahad II LCD. I have the case fans on the SL controller, the AIO & it’s 3 fans on the AIO controller but the rgbs aren’t syncing with the other fans. In the L connect app it’s on its own and have to configure it separately from the case fans. Anyway to sync them all together?

Great video! Thanks.

@TheProvokedPrawn

8 ай бұрын

Glad to help. Hope you enjoyed enough to subscribe 🦐

@kennylorentzon

8 ай бұрын

Sure did! :) @@TheProvokedPrawn

Im trying to hook up my fans but i found that i don't have enough SATA power connectors to connect the control box along with my lian li v1 strimmers to the power as well. Do i need to purchase a SATA splitter to have enough imputs for power?

How do you synchronize the RGB of one Infinity fan (connected to CPU fan header) to 3 other groups connected to the L controller? I am thinking of using one Infinity fan connected to the CPU fan header and 4 other Infinity fans connected to the controller (connected to the system fan header). But what do you do with the RGB connector of the CPU fan to sync with the fans connected to the controller?

Can these be used in a way, that one is exhaust and two are intakes?

Hey, great video , but can I connect 3 × triple pack fans = 9 fans if I only have 1 argb headers on my motherboard. PLEASE REPLY

Hey bud - thankyou for this video, awesome stuff -subbed!! Does anyone know how to connect these to an AIO? I have the three pack/ a bunch of individual fans - hoping I can get them onto my AIO without caussing grief (aka want the AIO to control the fan speed)

Ty, now I know how to setup my 9x fans yyo my 011 d EVO Chassie 😍

@TheProvokedPrawn

Жыл бұрын

I aim to please. Hope you enjoyed enough to sub.

Awesome video thank you 🙏

@TheProvokedPrawn

11 ай бұрын

You're welcome Dave. Hope you enjoyed enough to sub!

Does the single fan connect to the controller as well? You showed it had a PWM/ARGB connector and those dont go into the control box you showed. Im hoping the single fan comes with some kind of adapter to let you route a single and groups into one controller.

If I connect all the fans to the controller. Can I use other software to control the fans like Argus monitor or Fan Control. Or do I have to use L connect to control the fan speeds. I would really like to use Argus monitor, thanks!

excellent video but in my uni fans lian li sl-inf 120 3 pack i dont have spliter cable only single cable coming ouut of the fans and should go only to the controler. Im trying to use with ryuujin 2 360 but fans must go only to lian li controler

hi, i have the sl120 with the fan controller, id like to buy the infinity fans too but i dont want a second fan controler, what can i do? buy them in single boxes without the fan controller? i understand that in this case i have to connect them to the MB, can i use L-connect3 software on them? or can i connect them to the old sl120 fan controler?

Hi. Where are the SYNC effects gone in I-Connect 3? I mean the Meteor Sync or Runaway Sync. Heaving one color startin from the upper left corner and ending on the left bottom corner, and back?

Just got 10 infinity fans.. miss my corsair fans.. sooo much more adjustability in ICUE!!!!

I have the Lancool 216. Will I need the extra ARGB cable kit to connect the front 160mm fans to the controller l box for RGB control?

do i need the sl infinity controller that comes with a x3 pack (cant buy it by itself) or can i also use the sl uni fan L-connect 3.0 controller?

I just commented on the other video about the different contrillers So i can use the triple pack controller with the lcd aio ?

I have a corsair H150i elite, that came with a controller, my question is, if I use the SL Infinity fans, 9 x120 & 4 x 140, will I have to use the Lian li controller and what controller will I used for the AIO? Please advise

But can I plug the fans together, then plug the single wire into an ARGB hub and gain the same level of control? Or do I need to separate each fan and wire them to the hub individually?

Thanks a lot for this. This is one of the best tutorials I've come across. I have one tiny question. I went out yesterday and the infinity fans and did this setup you have here. Installed the fans and only one set of 3 light up and spin, all the others do not do anything. I tried switching the port on the controller but only the same 3 working. Any ideas what could be happening?

@TheProvokedPrawn

9 ай бұрын

kzread.info/dash/bejne/qqGAq7dtYLi1hqw.html

Awesome video!

@TheProvokedPrawn

9 күн бұрын

Glad you enjoyed it. Hope you appreciated enough to subscribe 🦐

Do I need to plug in the fan 4 pin in order for fan to work or just the 3.0 usb. I can get one or the other to work but not both. I have the INF fans. I have the control box but do need to plug in the 4 pin that’s what I want to know. I have the flat fan plug. Nevermind I figured it out.

The very first and educative video ever. In this case where did you connect the Galahad AIO Led? Big thumbs up for your work.

@TheProvokedPrawn

Жыл бұрын

The Galahad was already installed to be honest (from when I did that video), so I didn't mess with the wiring or use the new control box as I probably could have.

@musicsthearts7648

Жыл бұрын

@@TheProvokedPrawn I asked because I have 9 UniFans connected with one controller(with non space left) and I don't know how to connect the Galahad Led connector. Can you help me with?

@TheProvokedPrawn

Жыл бұрын

@@musicsthearts7648 connect it to the RGB header on your motherboard?

@musicsthearts7648

Жыл бұрын

The thing the AIO LED cable is made to be insert into the controller box. But there's no space left since the fans with rgb are connected in all 4 modules of the controller.

if you just use the sys fan headers and not the RGB ones, will the fans still function as normal, just without the RGB?

Awesome video, detailed and high quality! But since I'm not the brightest and may have missed this part, I'd just like to confirm: 1.A single pack fan, will work just off of the motherboard connectors and does not need the controller? 2.Can the RGB and fan speed be controlled via the motherboard headers and software, or do I need to install Lian Li's proprietary software?

@TheProvokedPrawn

Жыл бұрын

Correct

@TheEightTofu

Жыл бұрын

@@TheProvokedPrawn the single can just be plug in cpu fan header? im planning to use it as a cpu fan

Just curious with the single pack connector can you hook that up to the control box as well?

So I have 4 different cables from 8 sl inf 120 fans, 2 individual fans and 2 sets of 3 fans daisy chained (one of which are the 3 fans for the radiator). I am also using the Galahad ii sl inf 360 aio. Can you please explain how I can connect all the cables to the L connect 3 controller to sync the rgb of the fans and the pump.

Am i able to do 2 / 2 / 2 / 1 (2 triple packs and a single) for my ITX and still have them into one hub? going by the video it seems i can but just want to check before i blow £200 on fans 🙃

do you have to pugin the RGB cable for the fans to work ? its just because my mobo is that old it dont have any argb headers

I had to order 9x single fans instead of 3 packs due to shipping constraints. How can I solve the issue of not having the controller specific cables now? I'm thinking about ordering the controller separately, but from your video I realized I need a different connector on the fans from the ones that are supplied by the single units (which ends in 1 argb + 1 pwm outputs)

@The Provoked Prawn Hi sir, any chance you can do/show a Lian Li Dynamic EVO XL with 4 fans on the side and bottom? I really want to fill the case with fans and it already sucks that the Coolers are only built with 3 fans.

The wire of Lian li not lose in the hub you recommend? Cuz I tried other hub and it’s lose easy to take out in one move

Just got the salad 2 about and a set of three fans. Is there an adapter to connect one set of three fans to another set of three fans so I would only then have one set of wires to connect to a controller or mb

So if I want to put 9 of the infinity fans in my case I have to buy one triple pack and 6 single packs? So i can connect all 9 of them on one controll-hub

youre a life saver

@TheProvokedPrawn

10 ай бұрын

Sub for more life saving tips

Will these fans work if I replace my kraken x72 fans with these ? I’m curious since the kraken cpu cooler has 3 fan connections and the lian li will only have one