HOW TO CONNECT ESP8266 TO WIFI NETWORK | Ut Go
Ғылым және технология
Learn how to connect ESP8266 board to WiFi Network.
Component Link:
ESP8266 Board : amzn.to/3XaJjDu
Buy ESP8266 Development Board : amzn.to/2sR2EjS
Please share your suggestions and thoughts regarding this video in the comment section. Thanks for watching.
Need any help, ask in the comment section
.
Like | Share | Subscribe
Royalty Free Music from Bensound
Пікірлер: 66
Works perfect, cross checked in my internet provider's settings as well, it is connected with the same IP that the serial monitor outputs. Install necessary libraries to IDE to make it work. Thank you!!
@UtGoTech
Жыл бұрын
Good to hear👍
@CrazyMadafaka96
Жыл бұрын
@@UtGoTech a small problem I realised later is that it disconnects if I leave it for some time. Could you suggest a way in the code to check if it disconnects? So you can get it back online.
@UtGoTech
Жыл бұрын
if (WiFi.status() == WL_CONNECTED) { Serial.println(F("WiFi connected!")); Serial.println("IP address: "); Serial.println(WiFi.localIP()); } else { // Code to reconnect }
@CrazyMadafaka96
Жыл бұрын
@@UtGoTech I'll try that, thanks!!
nice vid, easy to understood. thanks
@UtGoTech
2 жыл бұрын
Welcome
Great work thanks for making this video
@UtGoTech
Жыл бұрын
Welcome
Thanks bro
@UtGoTech
Жыл бұрын
Welcome
did you connected NodeMCU esp8266 directly with computer or connected esp8622 with arduino then connecting arduino with computer?
@UtGoTech
11 ай бұрын
Connected directly with computer.
Hi, I cant see my board in wifi on my computer and in serial monitor i can only see '?'. please help
@UtGoTech
8 ай бұрын
Select proper Serial Communication Baud rate.
The serial monitor only puts out ASCII) Symbols?
@trigster
Жыл бұрын
when i set in on 74880 baud it says: ets Jan 8 2013,rst cause:2, boot mode:(1,6)
@UtGoTech
Жыл бұрын
Check the serial speed in code and in the serial monitor, both must be same.
Once we connect the chip to the wifi...will it get automatically connected to the wifi once we enter the wifi region
@UtGoTech
Жыл бұрын
Yes
nice video ffs
@UtGoTech
Жыл бұрын
Thanks👍
not declared in scope I have no idea
@UtGoTech
2 жыл бұрын
Please explain the fault.
if it doesnt work change the baud rate to 9600
@UtGoTech
Жыл бұрын
Ok
I wanted that a esp8266 main server control many esp8266 boards Esp8266 main server Esp8266 board 1 Esp8266 board 2 Esp8266 board 3 and more A one esp control main esp boards need audrino code
@UtGoTech
2 жыл бұрын
You can use blynk iot or UDP for that.
hello,I get some trouble here,when I uplaoding finish, serial moniter shows some "?" with brick , there is no ip adress in my serial moniter, how can I fix it?
@UtGoTech
7 ай бұрын
Select the correct baud rate
@user-ob4wi8cn2g
7 ай бұрын
baud rate is both 115200,may I ask you what the flash size need to choose? and what else need to set in the tool ?
@UtGoTech
7 ай бұрын
Flash size depends on the type of or variant of the board you are using. Look for the baud rate in the code then select the same baud rate in the serial monitor. Baud rate is written in Serial.begin() function
@user-ob4wi8cn2g
7 ай бұрын
@@UtGoTech I use Serial begin(115200) and serial monitor use 115200 too.I finally successful because I change the flash size,but I’m not sure what select is true. 1M,4M,512K? (My esp8266 module is Esp01s with Arduino uno not nodemcu)
@UtGoTech
7 ай бұрын
Ok👍
Make sure your wifi band is 2.4GHz
@aqilahmzln
9 ай бұрын
Thank you. This comment save me
@yuilhan4275
7 ай бұрын
BRUH THIS IS VERY HELPFUL
@dormiegogoi5406
3 ай бұрын
Thankyou
@UtGoTech
3 ай бұрын
Welcome
can u please share the code link with us
@UtGoTech
Жыл бұрын
You can find this code in example sketch.
@nehamiglani1498
Жыл бұрын
@@UtGoTech Thanks a lot!
Please give your code
@UtGoTech
9 ай бұрын
You can easily find code in the example sketches that came with the esp library.
how did you connect to your pc
@UtGoTech
2 жыл бұрын
Through wire or through wifi ?
Bro just showed his ip adress lol😅😅
@UtGoTech
3 ай бұрын
This is not my public IP address, so no issues.
Send code plz. Copy paste karna h
@UtGoTech
27 күн бұрын
You will get in example sketches
@csquare4685
25 күн бұрын
@@UtGoTech okay thank you
@UtGoTech
25 күн бұрын
👍
I can't connect my mobile with esp8266
@UtGoTech
2 жыл бұрын
Use ip address to connect to your ESP
@hematkarangiya9692
2 жыл бұрын
@@UtGoTech ip address hi nahi a raha he
@UtGoTech
2 жыл бұрын
Your can get IP Address of you ESP module from serial monitor
@hematkarangiya9692
2 жыл бұрын
@@UtGoTech serial monitor me dot hi ate he ip nahi ata
@UtGoTech
2 жыл бұрын
Which code you are using
. Variables and constants in RAM (global, static), used 30844 / 80192 bytes (38%) ║ SEGMENT BYTES DESCRIPTION ╠══ DATA 1556 initialized variables ╠══ RODATA 2512 constants ╚══ BSS 26776 zeroed variables . Instruction RAM (IRAM_ATTR, ICACHE_RAM_ATTR), used 61247 / 65536 bytes (93%) ║ SEGMENT BYTES DESCRIPTION ╠══ ICACHE 32768 reserved space for flash instruction cache ╚══ IRAM 28479 code in IRAM . Code in flash (default, ICACHE_FLASH_ATTR), used 254244 / 1048576 bytes (24%) ║ SEGMENT BYTES DESCRIPTION ╚══ IROM 254244 code in flash now it became this
@UtGoTech
4 ай бұрын
What issues are you facing?