this is best series ever of esp32 it has everything i want like same esp32 board and i also want how we can use html file as is this included in this series thankyou so much sir for your efforts

Wonderful tutorial, thank you very much.

Just in case this helps someone. My ESP-WROOM-32 REFUSED to connect to my home SSID. Connected to my Phone Hotspot fine, but not home SSID. Packet capturing the network showed the device was sending a DHCP DISCOVER, and my router responded with DHCP OFFER. HOWEVER, the offer had an "error" that the NTP value was not a multiple of 4. No idea why... looked fine to me. I deleted the NTP value from my DHCP server on my router and the ESP32 connected fine ever since.

Your videos are excellent. Clear explanations, great length, great graphics etc. Nice job!

@EnjoyMechatronics

4 ай бұрын

Much appreciated!

Excellent tutorial, well explained, thank you very much for your contribution.

@EnjoyMechatronics

Жыл бұрын

I'm so glad you like it 😊

Really great videos man! Very informative, concise and well put together. I really appreciate it

@EnjoyMechatronics

4 ай бұрын

Glad you like them!

bro ur actually the best at giving good info

How did you get around the Debug issues? What version of the Arduino IDE are you using?

Sir Thank you for your simple teaching with vast knowledge

Great! Thank you so much, your video helped me a lot.

@EnjoyMechatronics

5 ай бұрын

Glad it helped!

Thank you, that was very easy to follow

@EnjoyMechatronics

8 ай бұрын

Glad it helped!

Nice tutorial. Thanks.

@EnjoyMechatronics

Жыл бұрын

Glad it was helpful!

Excellent tutorial, thank you very much

@EnjoyMechatronics

9 ай бұрын

Glad it was helpful!

making a tank with esp32. great series to help

why is there a delay (around 3 to 5seconds) for led to turn on /off

hi i unconnected my lap from esp and then i cannot access to the IP address anymore, so i wonder if there is a way to commnicate wirelessly to turn on/off the led (i use battery to power the ESP32)

Thanks for a nice clip. I am just want to know that how many stations that the esp32 (access point) can be connected. As far as I know it can be connected just 2 ( 1 master, 2 slaves).

It supports 5g or 5gh band

Hello can I connect raspberry pi 4 with esp32? And send data from raspberry to esp32? if yes could you pls tell how to do that?

sir it show like connecing only ,it not connected to my network wht can i do..will u pleasesuggest a solution for it

Great tutorial. Liked and subbed.

@EnjoyMechatronics

3 ай бұрын

Awesome, thank you!

Thank you

Sir, I have question. While I upload to esp32 there have "flash read error 1000", what I Should do. thank you sir

Why its showing " waiting for download" in serial monitor after pressing reset button of ESP32CAM??

how to get .hex file for that

Amazing tutorial! Does the Ip-adress change everytime, or do i need a domain-adress? Does my smartphone also be connected on the same wifi? Edit: Can I create an additional File for html code and one for javascript?

@EnjoyMechatronics

9 ай бұрын

> Yeah, the ip address does change, but we could use ESPmDNS library to assign a simple name instead. > With this method, you have to be connected to the same network > You can add multiple files by using Peripheral Interface Flash File System (SPIFFS). SPIFFS is a lightweight filesystem created for microcontrollers with a flash chip, which is connected by SPI bus, like the ESP32 flash memory.

@wildboyy

9 ай бұрын

Thank you for your fast response :D@@EnjoyMechatronics

hello is there a reason i cant open the ip address ?

Thank sir 😊

@EnjoyMechatronics

11 ай бұрын

So nice of you

how would you control the the client esp32(Station mode) with the central esp32(SoftAP)?

@chiquitathechicken

Ай бұрын

ESPNow, it's a protocol in the ESP32 exapmles.

Thanks . Sir

@EnjoyMechatronics

Жыл бұрын

Any time

I don't know what I'm doing different than you but there are NO wifi examples included in the download from the board manager. The latest is 2.0.14 but I went all the way back to the package you installed in the last video, 2.0.5 and there still were no wifi examples. Edit: I went to your Github page and found an Arduino ESP32 package and tried to use the simplewebserver file from it, but is does not work. It stope at, "Leaving... Hard resetting via RTS pin..."

@chiquitathechicken

Ай бұрын

1. Please use the serial monitor to view what it says, the screen your looking at is not the serial monitor, but rather the output. 2. You have to set your microcontroller to the ESP32 bundle for you to see all the examples of the ESP32.

it throws the "Brownout detector was triggered" error. the board is connected to a laptop through its usb port. is there anything i can do to bypass this error and make the esp32 work?

@chiquitathechicken

Ай бұрын

That means your energy is too little for the ESP32, here's the code to disable it. #include "soc/soc.h" #include "soc/rtc_cntl_reg.h" void setup() { WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0); } this code basically tells the esp32 to stfu and do its work as intended, but its still better to get a better cable for the esp32.

@tocube1

Ай бұрын

@@chiquitathechicken thanks mate. surprisingly, switching to a different usb port solved the issue for me. It's weird!

Nice for new students Good

@EnjoyMechatronics

6 ай бұрын

Yes, thanks

Thanks for this good video now my ESP32 works with wifi

@EnjoyMechatronics

4 ай бұрын

Glad it helped

How much distance it can connect wifi..i mean there is any limit for this

@EnjoyMechatronics

4 ай бұрын

It's about 30 meters

Sir my ESP 32 is not connecting to wifi what can I do ?

@EnjoyMechatronics

Жыл бұрын

Try to reset it using its enable/reset key

@evigaming7611

Жыл бұрын

@@EnjoyMechatronics sir I'm done that bat it's not working.

@mtlmvn3650

Жыл бұрын

Sir please can you share this programing code

@victorananth

10 ай бұрын

Are there any issues with the Mesh routers?

excellent tutorial. How do I contact you?

@EnjoyMechatronics

6 ай бұрын

Here

@mas11ful

6 ай бұрын

@@EnjoyMechatronics I am needing some help with displaying a web page. Maybe you can guide me in the right direction. I want to use an ESP32 as a web server and have it transmit battery voltage, rpm, scale mph, and mph. I have the math and programming figured out so I can read it on the serial port, but don’t know how to get it to be able to see the information on a iPhone or iPad. I am 72 years old and have a hard time learning all this computer stuff, but I am trying. I have watched some of your videos, but still not sure how to get the variables to display on a web page. Thanks for listening.

Sir please provide code

@EnjoyMechatronics

Жыл бұрын

kzread.info/dash/bejne/k3xn1a5-gayaj9o.html

Randomly came across this tech. Can someone tell me what you guys use this board for?

@matteoraggi662

4 ай бұрын

It’s used a lot for IoT

Serial monitor is just printing dots

@lollyispolly522

Жыл бұрын

Okay it got connected but my esp kept blinking even when I clicked on off

@chiquitathechicken

Ай бұрын

1. Did you set the Baud to the correct amount? if not, place your baud to the same amount as stated on Serial.begin();. 2. Did you use the correct GPIO pin? check again to make sure, if not, please ensure that you used the correct code for it.

ANYWAYS is not a word. In English, try saying anyway.

@EnjoyMechatronics

9 ай бұрын

Thanks 😊

������������� mi ESP send this to the terminal :l

@hexagonal7708

10 ай бұрын

press reset button on your esp32 or check the baudrate

@chiquitathechicken

Ай бұрын

Check your baud, if its on 9600 like how a lot of codes set their baud rate to, change it to what Serial.begin(); says on the ESP-32 code.