I hooked up my subwoofer as you suggested, by coming off of the receiver to the subwoofer, then from subwoofer to speakers…….works perfectly 👍👍

This is great information Thank you for posting, it’s helping me with my set up

@mykandrew

2 ай бұрын

Nice! Glad I could help!

I am really old school currently with a very simple panasonic receiver...it only has one line input and two speaker outputs. I want to buy an active subwoofer. Using the Panasonic receiver and line cables it will mean keeping the subwoofer near to or underneath the receiver. Your video helped more than any other so far. I picked up cheaply a newer system with a subwoofer speaker output. It's flashy and bulky (Sony GTZ2) but it'll do. Thanks for your presentation.

@mykandrew

Жыл бұрын

I am glad I could help and happy that you're enjoying your setup!

@yes-69

2 ай бұрын

flashy and bulky is nice

4:29 so many channel try to explain that cables from amp spkr (B sets) to sub then to front spkrs but it's hard to visualize the connection from what outputs of the subs to front speakers?

Hi Mike, amazing review..Can I ask a quick question, I am complete beginer in this HT journey, just bought myself a Kef Q950, Kef Surrounds, Denon x3500 (old one from my cousin), SVS SB1000 and AudioaLab 7000a.. Currently Denon is running the Surround and Centre, and the SUB.. Audiolab is running as pre-amp with those Kef950s.. I am currently happy with the setup, but want to try connecting SVS to AudioLab... Not exactly sure with the cabling part, will it be a Y Splitter type RCA, 1 Male to the "In" socket in SVS to 2 Male RCA in the Pre-Outs sockets in the AudioLab

Right on Thank you for the advice

Hi Mike thanks for review perfect video I have klipsch fives and sub SVS1000 pro could u say how can i contact together it’s mean how much volume and crossover , phase i can choose to best result thanks 🙏

Do I need a Y-type XLR cable to connect Perlisten D212s with Denon AVR AH1?Or can I connect using a single XLR to one of the outputs?

So I've got 12" woofs in my 70s-vintage JBL L-65s. Wondering if I'll really gain much by adding a sub, and would it need to be more in the realm of 16 inches to be effective?

thank u sir

@mykandrew

Жыл бұрын

No problem! Thanks for the support!

That gorgeous and amazing Starke Sound subwoofer with XLR. I daisy chain 2 x stark sound subwoofers.

@mykandrew

Жыл бұрын

That is a good way to go. You got some nice bass in your system!

@chebrubin

Жыл бұрын

@@mykandrew Best XLR subwoofer in the business that will get the wife approval. Desmond at Starke Sound is a genius.

Feeding a powered subwoofer from the output of an amplifier seems wrong to me. The powered sub would want to see a line level signal I would have thought. Maybe I misunderstand something.

I have two bass units, when going to main speakers with speaker wire, the same way, would this, ground out the system , bass to main speakers

how do you connect KEF LSX to a sub from the wharfedale dx-2 surround sound system?

I have vintage adcom preamp and amp separates, no A/B speakers option on preamp, only one pair. no "speaker out" connection on svs sub. I used main out 1 for amp and main out 2 for sub. Many dont have 2nd main outs. how would i have added sub without it? I guess to use a RCA "Y" if had only 1 main out to go to amp and sub...

What is the subwoofer coaxial input on a receiver for??..And what does switched and unswitched AC plug ins mean?

Explained BEAUTIFULLY. Thank you

So I have a Rel1003 and I am trying to connect to a Marantz pm6007 with a dedicated sub out(single). Bought a QED sub cable and am a little confused as to where to plug in, can you help pls.

Very good. In a nutshell, all you need to know without blah, blah, blah. Thank you.

@mykandrew

Жыл бұрын

You are welcome!

Great tutorial. It's the best I've seen actually. My AVR has a sub out so that was easy. My other gear is older so I use the speaker level ins and outs and it takes the bass load off of my speakers. I'm not a bass head but I just like the low end extension.

@mykandrew

Жыл бұрын

Thanks for the support Mike! It's way easier with the sub out and line level in for sure.

I have an onkyo HT R560 av receiver. It’s a 7.2 home theater system. Bear with me because I don’t know how to talk all this jive. I purchased four Polk art-800 series home theater speakers along w/ a center speaker and a velodyne ct-100 subwoofer. I have no clue what wiring is needed or how to install the subwoofer. Help!

Have you ever thought about trying an active highpass filter when integrating subs?

@mykandrew

Жыл бұрын

I have considered it, I will definitely give it a try in a future video!

@dajikbatarang1

Жыл бұрын

@@mykandrew Im about to try, hopefully all goes well!

GOOD MORNING COLORADO!

@mykandrew

Жыл бұрын

Lol

@thegoat164

Жыл бұрын

The home of Lieutenant Joe Kenda....Colorado Springs

I need to know how to connect up a Sony subwoofer model s a w c t 390

I have a sound bar. And a 12 inch Kenwood subwoofer. I wanna use the soundbar for the speakers. How would I go about hooking that up to my TV?

@mykandrew

8 ай бұрын

Your soundbar needs to have a subwoofer output to be able to use the Kenwood sub. If that’s the case then hook up your sound bar through optical or HDMI Arc to your tv.

Can I connect a LE40B530P7WXCD COAX CABLE TO A SKW-658 POWERED SUBWOOFER

My subwoofer sound low . How do u know if u have a bad subwoofer speaker?

I understand your connections from the receiver to the sub but on your sub, and my sub, there is no connections for output to the mains… so then what!? Please reply.

Yet another confusing video on how to do speaker level connection. The video shows you connecting the wires from the receiver to the sub INPUT connectors. But no mention of how the signal is then passed to main speakers. You do mention that IF the sub has speaker level outs then connect the mains to those. But on this svs those arent present. So now what?

@rustydusty275

8 ай бұрын

You have a receiver right?

@tomelew8465

8 ай бұрын

Yes.

@ovidiurusu4490

6 ай бұрын

Dude You Connect the receiver sub out to the SW input there a 10€ male to 2x male cable, I hope it helped you, there also sub out to the receiver. I just read the manual lol. So I connected.

@meowhsu

6 ай бұрын

My question exactly ....

@BoRerunn

3 ай бұрын

Make a video ​@@ovidiurusu4490

I have two subwoofers connected to a 1,000 watt home theater system. I had to cut the power to them because of people in my neighborhood whining about it, LOL!

@mykandrew

Жыл бұрын

I dont like neighbors who complain about bass lol

Most concise video yet.

@mykandrew

Жыл бұрын

Thank you!

Why same amplifier are out of phase.

So not helpful. No idea what you're saying. Too fast. Not explaining well. No idea what your terms mean. I'll find someone who will explain slower and better.

Too fast paced and you go off on tangents.

This video is very hard to listen to. The sound is hyper compressed and irritatingly unnatural. Your voice is rushed and anxious sounding. The topic doesn't specify a powered subwoofer. Make the required adjustments please.

NOW WITH AND OLFDER AMP?? WITHOUT SUB-OUT YOU TELL ME TO USE NO OTHER SPEAKER!! GO BACK HOME AND START SCHOOL OVER?