Tools and materials:
✅ Double-head bolt
✅Wrench 🔧 or plier
✅Torque wrench
Steps
1️⃣ Insert the double-head bolt.
Pass the double-head bolt through the holes in the shaft sleeve.
2️⃣ Align the yokes.
Align the yokes so that the holes in the flange yoke and sleeve yoke with bolts are lined up.
3️⃣ Thread the nuts🔩 onto the bolt.
Thread the nuts onto the bolt by hand until they are snug.
4️⃣ Tighten the nuts.
Use a wrench or socket to tighten the nuts evenly⚙️.
5️⃣ Check for alignment.
Once the nuts are tight, check to make sure that the yokes are still aligned.
#cardanshaft#gearcoupling #driveshaft #universaljointcoupling #factory #transmission #spareparts #repair #cardano