I have watched over 15 tutorials today, and YOURS is the best SIMPLE description, hand DOWN............ I NOW understand, and will look no futher... THANK you!!

@dicksonkimanzi9510

5 жыл бұрын

yes he's the best in ip problems

Thank you for this. Not even a professional could help us, but watched this video and it fixed my issues immediately 👍🏼👍🏼👍🏼

@ENSSecurity

2 жыл бұрын

We're here to help. We are so happy you found a solution with this video. Feel free to reach out if you need anything else!

1 million likes to you, Sir! Thank you very much.

@ENSSecurity

5 жыл бұрын

No problem =)

thanks for very important and straight forward assistance on IP Cameras solutions ,it has been an issue for long time but now I fill ok .thanks very much looking forward for ur more technical support.

Your briefing methods was so easy to learn ...make more V clips advance technology in CCTV...

@ENSSecurity

5 жыл бұрын

Thank you. we will in the near future.

Greatly explained ever!! Love it. Thankyou for this

Excellent video. I even love the evil laugh at the end. 😁

you are my hero... you explained it better than any video on youtube... please keep going

@ENSSecurity

4 жыл бұрын

Thank you so much.

I didn't expect the laughing at the end hahaha! :) Nice video!

BEAUTIFULLY EXPLAINED . THANKS A LOT

Another great video! Very helpful!

@ENSSecurity

6 жыл бұрын

Thank you Very Much Thank you for watching. =)

Thank you for this helpful video..

Appreciate you taking the time to reply to almost every question posed here in the comments. Kind people still live here on earth.

@ENSSecurity

5 жыл бұрын

Thank you so much. I'm always trying to help.

another genius tutorial.thanks man. one of the best.

@ENSSecurity

4 жыл бұрын

Thank you.

Brilliant clear and straightforward

Excellent explained, A+ for you👍

Thanks great info! Helped me out!

Nice work Sir explain simply and easy way.

@ENSSecurity

5 жыл бұрын

Thank you I appreciated

Great precise to the point video, thank you sir

Thanks! This video helped me finally understand how to set up my NVR!! I read the manual that came with the camera and NVR over and over again and it did an awful job of explaining how to do it.

@ENSSecurity

5 жыл бұрын

Glad i can help =)

@rehan2118

3 жыл бұрын

@@ENSSecurity whats an MBR

@ENSSecurity

3 жыл бұрын

@@rehan2118 MBR stands for maximum bit rate allowing the bit rate to vary but only up to a maximum value, effectively VBR with a cap.

Thanks for your teaching on this video I will like to always follow your update and get more knowledge about IP camera installation.

I love this boss. You explained it well. A thousand Thank You!

Amazing video, thank you.God bles you.

I hope this is as easy as youved described.😅 thank you for the video

Powerful clips..love it la

This show is doing very well.

@ENSSecurity

4 жыл бұрын

Thank you.

Very explanatory.👍

Great Video to get knowledge Good luck Sir to you

@ENSSecurity

6 жыл бұрын

Thank you, =)

Very good teaching video

Thank you .. very well explained.

Thank you!

Your end laughing connected me with your ip address., Nice video bro💐

@ENSSecurity

3 жыл бұрын

You are welcome, glad you enjoyed. Subscribe, we have new videos coming soon.

Nice video.👍

Great video!!! 👍

iam a big fan of your vedios...and I Love the one and only unv ip cameras

Very Informative! Thanks

good video and very well explained thanks

Very well explained...,👌👌👌 Thanks...

Best video I've found yet. Good presentation. Music is a bit much, however.

great tutorial !

Thank you

Professional. Thank you

Nice man!👍

Great video, questions. Will it work if I connect those cameras directly to NVR? What's the point of Switch > Router I think to get internet right only. What's the difference? Where is the Uplink of that router to get internet?

@ENSSecurity

3 жыл бұрын

Thank you for your questions, if you connect cameras directly to the NVR they will work. The POE switch has a couple of uses, if the NVR can handle 32 cameras, many times the actual direct connections on the NVR can be 16. The POE switch adds the additional direct lines to get more cameras connected to the NVR. Connecting to the internet requires connecting the NVR to the Internet Provider. Hope this helps answer your questions. Let us know how we can assist.

@ProfitableAgribusinessIdeas

3 жыл бұрын

@@ENSSecurity thank you , so poe switch is optional as nvr has the POE switch itself. You are right👍

@ENSSecurity

3 жыл бұрын

@@ProfitableAgribusinessIdeas That is correct

Good video! Thank you!

Thanks, this really helps.

Very nice clear gd information thks for posting

Thank you well said...can now proceed to my homework

Great video.

Thank You sir😘😘

Top man!

@ENSSecurity

6 жыл бұрын

Thank you Very Much Thank you for watching. =)

Great tutorial clip

Thanks for the video

real nice and easy explained

@ENSSecurity

3 жыл бұрын

Thank you for your comments, we appreciate feed back.

Soo Good Explaine

Thank you very much.

Video is very good and explained the process step by step. But you didn’t explain why this method of cable configuration i.e. Cameras to Poe Switch then PoE Switch to Router and Router to NVR is more advantageous over the other method of Connecting Cameras to NVR PoE ports then NVR to a Switch or Router. And in which situations you would use this configuration than the other way. What are the pros and cons of both wiring configurations. Please explain. Thanks.

@govindrai93

Жыл бұрын

exactly, I didn't understand the purpose of this video.

thank you for sharing the ivdeo

Wicked laugh at the end 😊

cheers mate

nice video bro

Nice, basic video. You might want to mention DHCP range. Randomly picking IP addresses that are also in the router's DHCP table range is a recipe for disaster. I'm not saying that you need to explain all that in the video, but mention it so that installer can investigate and educate themselves further. Otherwise, there is a very good change that few days/weeks after installation they'll be getting phone calls about some cameras not working.

@ENSSecurity

6 жыл бұрын

Good point, and thank you for the feed back. for future reference I will try to explain as much as i can but at the same time be brief about it. =)

@VictorDiangouaya

27 минут бұрын

but he did ping those address and there is no reply so those IP address form the range allocate to ip camera. The router have the DHCP in it.

Hi, I'm planning to leave the switch in my roof and the NVR in the house. I will also connect the NVR to a UPS to provide a back up if someone would tamper with the main power. How should I connect it all to have the switch connect to the UPS as well? I reckon the switch must be directly connected to the UPS?

@ENSSecurity

5 жыл бұрын

Everything that you would like to have it ON in case the main power goes off needs to be connected to the UPS. if you are able to connect the NVR and other devices to the UPS simply use a Power Strip to connect more than one device to the UPS. if you cannot do that then you must get separate UPS to power the other devices that are not in range.

Can you connect more than one NVR to the PoE switch?

Thank you for the useful video I have a question, i have a Dahua IP camera and Dahua NVR 4 Channel but doesn’t have built in POE so i had to buy an external POE switch now my question is I don’t want to use router or internet i only need to connect one camera directly to the NVR, when i connect the nvr to the poe switch and the ip camera connected to switch poe but i got blank screen on the monitor that says:10.0.0.60 Can not find the network host So do i need to adjust the IP address for the camera make it the same as NVR IP address?? Thank you

@ENSSecurity

6 жыл бұрын

If you dont have a Router. then you need to create your own ghost network. set the ip address to the NVR static for example IP:192.168.1.10 SUB:255.255.255.0 Gateway: 192.168.1.1.. then connect a laptop to the PoE switch and use the software that Dahua uses to find the ip cameras on the network and set each camera with the same network setting except the IP. for example first IP camera 192.168.1.11 the second 192.168.1.12 with the same SUB and gateway and then you should be able to add them onto the NVR. hope this helps.

If I didn't use port forwarding that is if the router DHCP is enabled after assigning static IP to the NVR and the Cameras.Is it work seamlessly for year??

Mr. Sir Thanks a lot......lease may i request for a video clip on how to configure cameras both analog and I.P to the phone. Thanks

@ENSSecurity

5 жыл бұрын

Hi =) please see this video. this should help you. kzread.info/dash/bejne/i6eY1dNslNGeqs4.html

Perfect

Thanks for this great video. Question….. is this the same method if you plug the cameras directly into your NVR Poe ports??

@MrDarkstarpro

Жыл бұрын

no its would be 4 different ip rather then 1 with the switch

hey good day again to you. I was wondering if I could use a HDMI to ETHERNET adapter to transmit the video signal from my NVR to multiple TVs in different locations as a monitor to be able to view my network cameras??

@ENSSecurity

3 жыл бұрын

Hello Ian King, yes that is correct, you could use a HDMI to Ethernet Adapter to transmit the video signal,

Thanks for this tutorial. I have a question. Can a 4 channel NVR take up to 32 camera when using an external POE switch?

@ENSSecurity

4 жыл бұрын

Even though you can, you cannot record all of them.

Great Video! Question: SInce this setup is already connected to the network switch, can we do away the NVR and retrieve the video footage on a desktop PC instead? If it is possible, is there software available for me to interact with the cameras on a PC without a NVR?

@ENSSecurity

6 жыл бұрын

Yes that can be possible, but the Computer needs to be 24/7 ON in order to Record. Also make sure that your IP cameras Have a CMS Software. I really dont know what type of cameras you have at the moment but if they are Our Brand you can go to our website and download the NVMS1000 for windows or NVMS1200 for MAC under Support. Note that the HDD on the computer needs to have a large space for the IP video recording and also that the CMS does not work exactly like a regular NVR.

Great Info. I have a NVR that uses this softwear, when cameras are connected, they are not shown on the NVR, do we need to enable them, how do we do that.

nice video!! how do i add an IP camera to a DVR?

Very helpful video. I have one question. When setting the IP addresses for the cameras using this process does the IP address become static so that they do not change when the router loses power or when the NVR reboots? Thanks!

@ENSSecurity

6 жыл бұрын

if you are able to change the ip address of the ip cameras from the NVR, then the IP address of the IP cameras would be static. and nothing will happen if you reboot the network.

@robertfollis3501

6 жыл бұрын

Thank you

QUESTION DID YOU USE A CROSSOVER CABLE FROM ROUTER TO SWITCH OR LAN/PATCH ?

@ENSSecurity

4 жыл бұрын

Most consumer products support MDIX so cross over cables isn't necessary. We used a straight-through cable in this video but YMMV depending on what the equipment supports.

Excellent video....very well explained. However, I have a two questions I am hoping you can assist with. Q1... The configuration software that you use to check the settings of the network, and also add the cameras. Is this standard software that comes with the NVR or is it an additional purchase. And in addition to this, if the software is part of the NVR, where are you viewing this to enable you to adjust the settings. Is it via a HDMI cable to a monitor or to a PC screen. Q2... If one of these cameras was say a very high end IP PTZ camera whereby it needs additional power, say 12 or 24v, how do you connect this if the camera is say 15 to 20 mts from the camera to the POE switch. I'm sure the Adaptor does not have a cable that long. Is it possible to add a video on how this would be setup. I am thinking of getting a system using 1 or 2 IP PTZ cameras (high end) and want to ensure I get the right POE and NVR. I wouod also like it to work with a Apple environment NOT WINDOWS. Any assistance would be helpful...I find your videos very informative...Keep up the great work.

@ENSSecurity

6 жыл бұрын

Q1 A1.. That is part of the NVR interface and there is no additional Purchase. It comes standard on all our NVRS. Q2 A2. Most cases IP PTZ cameras Installers Run a Pair of 18 Gage wire to provide power. If the PTZ needs 24V AC you can run 24V AC on 18 Gage cable easily 800Ft. If you are running 12V DC you can easily run 200Ft. The connections as for the network stays the same. IP Cameras to PoE switch, PoE switch to the Router and NVR to the Router.. The NVR has a software client for PC and MAC OSX. Mobile remote is fully supported with Apple and Android devices. "Super Live Plus" that's the app name. Note: If you buy a NVR system and have IP cameras from different manufactures this features might not apply. It is recommended to have the NVR and IP cameras from the same manufacture or brand to work best. Thank you i hope you find this useful.

@mikee2056

6 жыл бұрын

Yes I did, thank you. Just wish you guys operated here in Australia, would get you to provide and install the system. Have a very hard time getting reliable feed back here. I am looking to spend a reasonable amount, just want it done properly.

@ENSSecurity

6 жыл бұрын

We hear you. I hope our help even from here can help you..

Can I connect the router to the POE switch instead of the NVR and the NVR directly to the POE switch? I ask the question because I think it will be better in case that there is no power and the NVR and the POE is running with a battery backup. And if that is the case what is the process to setup everything on the NVR?

@ENSSecurity

6 жыл бұрын

Yes, you will be able to connect everything to the PoE switch. Remember that the UpLink port on the PoE is the one that is going to be connected to the router. Hope this helps.

@zakiwagiman1039

6 жыл бұрын

meaning if we want to achieve this, we need POE switch that has more ports, right? anyhow...i was wondering, what is the difference between these 2 connection types; NVR to router VS NVR to POE switch? Please advice. Thank you.

@ENSSecurity

6 жыл бұрын

If you connect the NVR to the PoE switch and the PoE switch to the router makes no difference as the other way. The only thing is that if you connect the IP cameras to the PoE switch then the NVR would Auto configure the IP cameras instead of adding them manually

Bless up

Thanks for sharing this video.can i ask what are those characters to be input when configure camera ip address?im doing DIY CCTV in our home.all my 4 cameras indicated with camera 01 at the monitor.

@ENSSecurity

2 жыл бұрын

The IP address is of the camera is dependent on your network's IP address scheme. It might even be 192.168.1.1 like the video, but it can be different. Use the command prompt while connected to the same network to see your network address scheme.

@eugenearbuis8007

2 жыл бұрын

@@ENSSecurity Thank you, Sir looking forward of your future videos.

I have question I have Hikvision nvr when went in the camera configuration it see the camera it they when add camera. it say no ip camera find. the camera all hook to Ethernet port . I even change the ip address as closeer to the default gate. same same problem the camera that is connect through the wireless Bridget. some i was able to add it would say network unreachable.

@ENSSecurity

5 жыл бұрын

Do you have IP cameras that are Hikvision and an NVR hikvision?

What software are you using?

If PoE cameras support sd cards can you still use a PoE switch without the nvr?

Hello, I have an account with Eastern CCTV. Thank you for this video. Does the PoE have to be a gigabit PoE switch or is 10/100 ok?

@ENSSecurity

6 жыл бұрын

It all depends how many IP cameras you have connected to it and also at what MBPS you have them set at. For example if you have 10 IP cameras at the maximum of 10Mbps that equals to 100MBPS and if you have more cameras connected to the PoE switch then the network will not work properly on the PoE Switch. If you are going to connect a large number of IP cameras i recommend you the Gigabit Switch.

@williamirizarry1113

6 жыл бұрын

Hello, Thank you for your quick reply. Yes, this is 40 ip camera system. Can I go to a non-poe gigabit switch at the NVR and branch out to 5 seperate 8 channel 10/100 PoE switches each having 8 cameras? (or do the PoE switches also have to be 10/1000 switches?)

@ENSSecurity

6 жыл бұрын

Yes you can do that. You can connect the NVR to the Gigabit Switch and connect all you PoE 8 Channel Switches to the Gigabit switch as well.

What is the name of the software you using for configurations?

Can I add 32 camera in my 16 channel nvr using switch? Please let me know

@ENSSecurity

2 жыл бұрын

Hello, the channel maximum is the total IP cameras the unit can accept. If the NVR is a 32 channel but only has 16 ports on the back of the unit, you can use an external PoE to add the remaining cameras.

If I had a ethernet switch that had more POE ports than the NVR's POE ports, how many cameras could i connect to it?

Hello, thank you for this clear explanation. I have one question. I have connected the Nvr to the PoE switch. The PoE switch is connected to the router. If I search the cameras, he sees them, but al have the same ip adres and same image. How can I change this? Thank you in advance!

@ENSSecurity

4 жыл бұрын

You will need to use the appropriate IP configuration tool. Scan for the cameras with the tool, then assign IP addresses that follow the general network scheme. The tool will depend on the product line.

@moliena

4 жыл бұрын

ENS Security Plainview | Professional Security System Wholesaler thank you for the quick answer! I don’t think I have a config tool for this camera system.

I'm new to all of this can you plug the bot into the router and see the cameras on your computer or do you have to gave an nvr. I was think of recording using my computer or can you do that.great video btw

@ENSSecurity

5 жыл бұрын

You dont need to have an NVR to Watch the IP cameras remotely from a Computer. Some IP cameras have a software that would allow you to make your PC to record as an NVR but the PC needs to be on 24/7 just like an NVR would be. Also, the software allows you to see all IP cameras on the screen as if you had an NVR.

@nightstringers

5 жыл бұрын

@@ENSSecurity I thought that was the case as far as using a PC I'm guessing you have to have some kind of Hub to plug all the cameras into and of course power them if you're using Poe

@nightstringers

5 жыл бұрын

@@ENSSecurity thank you by the way preciate your reply

@ENSSecurity

5 жыл бұрын

@@nightstringers Correct.

Hi what if i want to have 2 poe switch? Does it work 2 cameras every switch ( wanna use the second switch to another building) so that only 1 cable for 2 cameras long range

@ENSSecurity

5 жыл бұрын

If you have 2 or 3 PoE switch you can connect them this way. From the Router connect a CAT5/6 To the first PoE switch on the UPLINK port, then plug one CAT5/6 on any PoE port in the PoE Switch and connect it to the 2nd PoE Switch on the UPLINK Port. This way you can connect as many cameras as the PoE switch is capable of using just one cable run to the Router. Note. You can also connect the NVR into the PoE Switch, Just make sure you connect the LAN port of the NVR to any available port on the PoE Switch.

Is it possible to connect the external switch to one of the NVR Internal Switch Ethernet ports (usually used for cameras) so that the cameras connected to the External Switch are assigned ip addresses from the nvr internal switch, so the cameras on the external switch appear to be on the internal switch’s network?

@ENSSecurity

3 жыл бұрын

Yes, in order to use all the channels that NVR's or DVR's offer you need to use an external switch to add more cameras. Many NVR's and DVR's do not have all the ports needed in the back. For example, an NVR that can handle 32 Cameras may only have 16 ports available, you would need an external switch to add the additional 16 cameras. However if a recorder is not able to handle more than 16 channels, adding a switch to add over that capacity will not work. The key is, how many channels can your recorder handle.

I have my camera cables and internet router in my garage. I have ethernet cable in my room which is connected to switch in garage. Can I put camera cables in that switch in garage and connect nvr in bedroom which has Ethernet cable coming from same switch?

@ENSSecurity

2 жыл бұрын

Hello, we recommend reaching out to your installer before changing wiring. If you are the installer, please reach out to our technical support department.

if I have a 16 channel NVR with 16 IP cameras can I group them either by 2X 8 port POE switch or 4 x 4 Port POE switch as long as the uplinks of each POE Switch and the LAN of the NVR is connected to the same router? Secondly could I add another router from one of my main router ethernet ports to handle my IP Cameras and NVR so I don't have too much overload on my main router between the IP CCTV system and other computers and tablets on the same network! Basically I want my IP CCTV system to have a dedicated network from my home computer/tablet network! PS: In my current home I have a 8CH NVR with 8 IP Cameras which are connected via the POE ports of the NVR, However I might be purchasing a bigger home which requires double the cameras that I currently have now and the structure seems to have more obstacles than my current home to have all 16 ethernet cables to meet at the same point!

@ENSSecurity

6 жыл бұрын

The answer to both of your questions is Yes you can. You might need to add the IP cameras manually because they are not connected directly to the PoE Ports on the NVR If they are EasternCCTV Titanium Series IP cameras and you have a titanium NVR just follow the steps on this video. If they are not EasternCCTV then you might need to refer to their manual or call their Tech support =)

@Hi-Tech-Ray

6 жыл бұрын

would I be correct to say that direct connection to the POE Ports of the NVR the IP cameras are automatically assigned IP addresses by the ports that each is connected to?

@ENSSecurity

6 жыл бұрын

Yes. The NVR would automatically assign and configure the IP camera. In order to do so the NVR and the IP camera has to be the same brand and of course they need to support Plug & Play Feature.

I want to use 3 poe switches, where to connect the other 2 poe switches? Can i interconnect the switches and connect just one switch to the router via gigabit ethernet wire/port?

@ENSSecurity

5 жыл бұрын

PoE switches they act just like any other network Switch. you can have many PoE switches connected in like a chain mode. if your PoE have an UpLink port then connect that to any available port on the other switches. As long as you have the IP cameras connected to a PoE port then you can connect the Switches any way you want as long as you don't exceed the maximum bandwidth of the Switch.

Hi what if i plugged a whole bunch of Cameras to the NVR and use another Switch to NVR and connect more cameras to the Switch will it work?

@ENSSecurity

5 жыл бұрын

if you connect the NVR LAN port to the External PoE Switch and the switch to the router then it will work. if you connect the POE switch to one of the POE ports on the NVR, there might be a chance that it might not work. also, the NVR has a limit to the number of IP cameras that you can add.

I have an 8 ch POE CCTV system, I want to run it like how you have run the setup, can I do that with a TP link to a plug then Ethernet cable to the NVR and the POE switch?

@ENSSecurity

2 жыл бұрын

I'm going to find out this information for you.

@ENSSecurity

2 жыл бұрын

Can you describe to me more about the "TP Link to a plug" device? Most importantly, though, avoid looping a PoE switch directly into the onboard PoE. Powerline and wireless adapters will vary depending on bandwidth capabilities of the device and environment and any special network restrictions the device may use. Hopefully this helps! Let us know about the "TP Link to a plug" you're referring to in your post.

Question? I assume that the cameras run off of the Ethernet cable power as the dc leads are disconnected. Is this correct?

@ENSSecurity

4 жыл бұрын

Yes, that is correct. As long as the camera is Power-over-Ethernet capable and connected to a PoE switch.

question what type of PoE switch device you are using? Brand made

@ENSSecurity

4 жыл бұрын

Hi, we are using the switches we carry. If you are using the UNV series, you can buy the UNV PoE switch. Please check our website: Accessories / Network Switches

Does the POE switch need an uplink port? My NVR network system will be separate from my internet network.

@ENSSecurity

5 жыл бұрын

You can also connect the NVR LAN port into any available port on the PoE switch. It is recommended for the PoE Switch to have an UPLINK port so it can be connected to the Router. If the PoE switch does not have an UPLINK port then simply connect one of the PoE ports to the router. So basically everything would be connected to the PoE Ports on the switch. NVR, IP Cameras and Router.

Hi I am having a problem adding my ip WiFi camera to my nvr! Is it the same process I need to follow to get it to work, it works on my nvr but once I unplug the LAN cable it freezes and says not available. I’m lost what to do now because all I want is to you it for the Wireless feature not have a LAN cable attached as that. defeats the object. Can you give some info what I can do as I’m not very tech

@ENSSecurity

4 жыл бұрын

The problem is likely either that: 1) power is not being given to the camera, so when you unplug it from a PoE switch you lose power to the camera. 2) you may be programming the cameras "wired" connection rather than it's 'wireless" NIC setting. or 3) Wireless signal at the mounting location isn't enough