DIY - IP CCTV camera installation, using a Single POE switch with view on phone.
Ғылым және технология
Step by step guide on How to Install IP CCTV Cameras using a POE switch connected to a non POE NVR.
1. This video shows all the steps in installing an IP Camera
2. This video shows the process of fully connecting POE IP Cameras and Non POE IP Cameras to the NVR through a POE Switch.
3. The video uses Non POE NVR.
4. The non POE NVR requires a POE Switch to help connect the cameras to the NVR.
5. The POE switch both supplies power to the cameras and also receives all the cameras and feeds the camera out puts to the NVR.
6. In addition, this video explains how remote view setup for the CCTV video access on Phone is done, starting from the connection Process to the phone configuration.
7. The whole process is explained in this video, from the connection of the cameras to the testing of the systems and remote viewing on phone.
Background Music: Royalty free Music from Bensound.
Пікірлер: 116
Nice presentation. I've been following your videos in order to learn how to install CCTV cameras.
@Tech_Inside_Out
2 жыл бұрын
Thanks for the compliment. Expect more videos in the coming days.
You have such a great teaching skills the way you're explaining things make us more engaged, concentrate, and the explanation are simple and clean thanks anyway for sharing your knowledge with us really appreciate
@Tech_Inside_Out
Жыл бұрын
I give God the Glory for wisdom. Thanks so much for watching
great tutorial, thank you for this.
@Tech_Inside_Out
Жыл бұрын
Thank you for appreciating it and thanks so much for watching.
Great job thanks for helpful videos .
@Tech_Inside_Out
11 ай бұрын
Most welcome Sir. Please visit our channel at www.youtube.com/@Tech_inside_out
Very informative. Gracias. 👍
@Tech_Inside_Out
2 жыл бұрын
Glad it was helpful! Expect more informative videos.
Concise and on point
@Tech_Inside_Out
Жыл бұрын
Thanks very much
Thanks for your information. Very nice
@Tech_Inside_Out
Жыл бұрын
You are welcome
I am really enjoying it may God bless you for sharing your knowledge with us
@Tech_Inside_Out
10 ай бұрын
God bless you too. There is more on my channel at www.youtube.com/@Tech_inside_out
@josephbernardamponsah8219
3 ай бұрын
Can I get your contact Sir. Thanks
Really clear video Thanks for share
@Tech_Inside_Out
8 ай бұрын
Most welcome
Thanks for the video!
@Tech_Inside_Out
2 ай бұрын
You're welcome
Thank you so much❤
@Tech_Inside_Out
7 күн бұрын
Most welcome
Thanks I really appreciate
@Tech_Inside_Out
2 ай бұрын
Thank you
Thank you brother Benedict
@Tech_Inside_Out
Жыл бұрын
You are welcome. There is more when you visit our channel, www.youtube.com/@Tech_inside_out
@johnnycox3207
10 ай бұрын
@@Tech_Inside_Out2:52
Great explanation and nice video 👏 👏 👏
@Tech_Inside_Out
Жыл бұрын
Thank you
Good job
@Tech_Inside_Out
Жыл бұрын
Thanks
THANKS
@Tech_Inside_Out
Жыл бұрын
You are most welcome, There is more on our channel www.youtube.com/@Tech_inside_out We do appreciate your time on our channel.
You are one of the best!!👏👏
@Tech_Inside_Out
Жыл бұрын
We thank God. Am glad it was helpful.
Awesome
@Tech_Inside_Out
Жыл бұрын
Thank you
hi..thank you for sharing this video..just want to ask if the router will have wifi signal to connect other devices
@Tech_Inside_Out
2 ай бұрын
Yes, the router will still have WiFi signal for connecting other devices
Hi, pls must the NVR be a Poe NVR as well?? And What type of network cable do you use for your installation? cat5 or cat6… thanks
@Tech_Inside_Out
2 жыл бұрын
The NVR should not necessarily be a POE NVR. What i used in this Video is a non POE NVR. I used Cat 6 network cables in this very demonstration but Cat 5 cables also work perfectly.
@joseph5315
2 жыл бұрын
@@Tech_Inside_Out I appreciate your reply Thanks.. looking forward to more videos from you
Very good explanation... Really nice.. I have total 5ports PoE switch with one uplink port... One cable connected from Modem to uplink port of PoE.... NVR is connected to one port of PoE switch...also 2cameras are connected in the PoE switch...is it correct sir.. Can you put a video on PoE switch Function and how does the data's are transferred... Thanks a lot for your video...God Bless,,👍👍👍
@Tech_Inside_Out
Жыл бұрын
Hello Jeyapandian, The connection you explained will work as you are using just 2 cameras but when using about 10 or more cameras, this method will not work. The best way out is to connect the NVR to the modem and maintain all the other connections as you have connected. That will make the network more efficient. I will consider doing another video on POE Switch as requested. Thank you for watching, God bless you too.
@jeyapandiann7051
Жыл бұрын
@@Tech_Inside_Out Regards👍👍👍
Thx
@Tech_Inside_Out
Жыл бұрын
Most welcome. There is more when you visit our channel, www.youtube.com/@Tech_inside_out
Thank you...which type of cable are being used...? 1 Straight, 2 cross. 3 over, roll over???
@Tech_Inside_Out
7 ай бұрын
Straight through cables
@vipulakularathne3664
7 ай бұрын
@@Tech_Inside_Out 🙏 thank you vary much sharing the knowledge.... Sir I want know that how can I install and configure the distance recording what are the h/W and software protocols we need. Ex , my office at away from 20 km and I want to do keep recorder NVR or other at my home.
This channel is precious, already subscribed. Sir I want to ask how do all IP cameras be able to access the internet and provide remote access when your internet router is not connected to a modem or fiber cable from your ISP through the blue colour WAN/Internet port of the router? This is the only part that I don't get it. Thanks!
@Tech_Inside_Out
Жыл бұрын
1. My router contains a SIM card through which i receive Internet into the router. 2. Since the router is connected to the network switch and the cameras are also connected to the switch, they will receive the Internet which is shared on the switch. Am preparing a new video that will explain how all these happens, ie Switches and router connections and how they function.
@johnsonjohnson129
Жыл бұрын
@@Tech_Inside_Out I see, but why SIM card connection is chosen in such scenario? Cellular data has limited usage, expensive and the internet connection is unstable when being interfered by bad weather such as rain. Would you suggest to use ISP modem subscription with an actual optic fiber running into an office for internet connectivity?
@shuaibalghazali3405
Жыл бұрын
@@johnsonjohnson129 that sounds more expensive and would take a longer process. I believe he's just using what's best for him. Remember this is also a tutorial
sir why didnt you put the ethernet cable from the router on poe ports insted of lan port?.
@Tech_Inside_Out
Жыл бұрын
The Uplink port of the POE switch has been optimised to deliver at a higher bandwidth than the POE ports and that facilities ease of video transfer or transmission. That will mean that there will be much path for video flow with no breaks.
Good
@Tech_Inside_Out
Жыл бұрын
Thank you
Am about to install for the first time a poe powered ip camera's, are they stable and can power the camera well?
@Tech_Inside_Out
8 ай бұрын
Yes. very stable, reliable and simple
Hi Im quite confuse why are there two uplinks? cant a single uplink be enough to carry the 4 ports? please enlighten me thank you
@Tech_Inside_Out
Жыл бұрын
Hello, 1. The two uplink ports help in connecting two switches together, whiles connecting one to an NVR. This video might provide much information. kzread.info/dash/bejne/pm2c2KiDl9Gqmrg.html 2. One uplink port is enough to carry all 4 ports.
Hello, so if we connect router to uplink port, it will work totally fine? What is adventage of connecting it in poe port instead to uplink port?
@Tech_Inside_Out
Жыл бұрын
Using the Uplink port rather has advantages over using the normal POE ports. The Uplink port has been designed to handle a higher bandwidth than the normal ports and so in larger camera networks, the best place to connect a router is the Uplink port
@kithsiri.wijebandara
2 ай бұрын
Thank you for the question. I found this when Iam searching for a answer for this question.
hi on your video you say cat 6 cables will cat 5 work or do the cables have to be cat 6, thanks,
@Tech_Inside_Out
Жыл бұрын
Cat 5 cables work.
@tildrik
Жыл бұрын
@@Tech_Inside_Out thank you for the speedy response
What is the use of the third terminal of the IP camera
@Tech_Inside_Out
Жыл бұрын
Its for audio connection from the camera out to other devices.
Having a 8chPoe nvr and 7 Poe cam connected. Want to connect 1 non Poe cam to the poenvr. Would I need a Poe switch for connecting one nonpoe to the Poe nvr pls? Or there’s a way to beat it.
@Tech_Inside_Out
Жыл бұрын
You need a POE splitter connected to that 8th port to split the signal coming from the NVR into video and power. The video is the RJ45 end and the power goes into the ethernet jack of the camera and you are sorted. As mentioned, i will do a video explaining all these.
@swaggst
Жыл бұрын
@@Tech_Inside_Out pls have you done a video explaining this as you said?
@Tech_Inside_Out
Жыл бұрын
@SwaggStreet Inc Please which one are you referring to. I don't quite get the exact promise you are referring referring to
hi, can you explain the camera it is working till i have broadband internet, once i unplug cable from computer, it stop revording, not even letting view video on my phone, or if plug still in computer, but turn off broadband router, it stopped working camera, so camera will work only if i have broadband internet? without internet - i need NVR box recoder correct? any explanation will help me, i want instal in my car on the roof. with second battery. thank you
@Tech_Inside_Out
Жыл бұрын
IP Cameras do not require internet to work, there might be a break in your network some where that might have caused the problem. You need the NVR to do the recording unless you would like to record using your computer which is also possible. Please contact me if the problem persist. benedict.gborgblorvor@gmail.com
I have a single ICSEE camera which I want to directly connect to my Hikvision Turbo HD DVR. How can I do that?
@Tech_Inside_Out
7 ай бұрын
Please use this video as a guide kzread.info/dash/bejne/h6aLybhqdpqwdtY.html
Can we connect the router to the uplink port of Poe switch instead?
@Tech_Inside_Out
Жыл бұрын
That is recommended especially when using higher number of cameras since it delivers a higher bandwidth.
@reccakarl
Жыл бұрын
Can you make another video on how to connect multiple switches from access layer to core layer? Thanks
Can I use ip camera for a distance more than 100m pls
@Tech_Inside_Out
Жыл бұрын
You can do, provided you are able to position a switch at a distance within 100m from the cameras. You can watch my video on how to link multiple cameras to an NVR, it shows how it can be done
How do I know non pie camera from pod camera
@Tech_Inside_Out
7 ай бұрын
It is stated on the Camera
Is it possible for me to view what is happening in my home in Uganda when I am in Australia in my phone by help of CCTV camera
@Tech_Inside_Out
Жыл бұрын
Very very possible. Wherever you are in the world, you can see your house. Am currently working on a video in which i will show how you can even see multiple locations at another location
@Tech_Inside_Out
Жыл бұрын
If you have a house at Uganda, one at Australia, hou can see all of them at once from say in USA or wherever you find your self
Thank you Sir for the great work done. Can i get your contact? Thanks
@Tech_Inside_Out
3 ай бұрын
Thanks very much 020 704 1650
❤
@Tech_Inside_Out
Жыл бұрын
Thank you
What happen router connect to poe?because poe power 48v
@Tech_Inside_Out
19 күн бұрын
The POE switch is made an intelligent device to know when to supply power so that since the router does not require power from the POE Switch, the switch will not output power.
That's brief explanation
@Tech_Inside_Out
Жыл бұрын
Thank you.
How can I add a coax camera to this?
@Tech_Inside_Out
9 ай бұрын
Cameras that connect by Coax are analogue and can not be connected to digital systems.
@schwamieboy1
9 ай бұрын
So all CCTV cameras have to be replaced? @@Tech_Inside_Out
@Tech_Inside_Out
9 ай бұрын
@schwamieboy1 It depends on what you want to do and your financial capability.
@schwamieboy1
9 ай бұрын
I have 4 analog cameras that I want to add to my new 8 channel NVr which comes with 4 IP cameras. Do you have a tutorial on this? @@Tech_Inside_Out
What is tge meaning if POE?
@Tech_Inside_Out
Жыл бұрын
POE is Power Over Ethernet. I have created 2 other videos that give further explanation to POE. Please see the video links below kzread.info/dash/bejne/eoynttl_l87RdMY.html kzread.info/dash/bejne/onafxtFtqayooNY.html
nice but you only boot up and you're in the switch system.......... How do you get there?
@Tech_Inside_Out
Жыл бұрын
Thanks for your question, this video shows every process. There are processes that need to be shortened, for example the long boot time of the NVR which does not contain any instruction and hence you will not miss any information It really covers every detail. In case there is a particular point that is not too clear, please let me know so i can provide precise answers. Thank very much for contacting Tech Inside Out.
@abdulqadirrafiq6704
Жыл бұрын
@@Tech_Inside_Out I understood thank you ... At First I thought the DVR must be connected to a computer then to a monitor while the DVR works as the CPU itself
Very helpful, can I please have your contact?
@Tech_Inside_Out
Жыл бұрын
Hello Kwame, Thanks for your compliment. Please check your email.
My biggest challenge has understanding Splitter, Adapters, Extenders
@Tech_Inside_Out
Жыл бұрын
I will try and put something together along those lines
@richytechsolutions
Жыл бұрын
@@Tech_Inside_Out Thank you very much sir
what's the name of the application used to set up the cameras on the monitor?
@Tech_Inside_Out
Жыл бұрын
For the monitor, if i get you right there is no software required to display the cameras on the monitor. For display on computers, you require a VMS.
$
@Tech_Inside_Out
Жыл бұрын
Thanks