Why didn’t she show when she placed the gold leaves? I was waiting for that specific moment lol 😂

@ksentials4442

Ай бұрын

🤣 sorry, I have a video where I show this step. The gold is added to the silicon mold. You can also mix it into the cement mix with the mica powder... but for best results add on mold.

Absolutely beautiful 💕🙏 Thank you!

So beautiful...this video will do numbers because those are absolutely amazing 😍

@ksentials4442

2 жыл бұрын

Thank you so much!! ✨

so beautiful!! Thank you.

@ksentials4442

2 жыл бұрын

Thank you!!!

@mikekiske

2 жыл бұрын

@@ksentials4442 Hi, there. The final result looks so smooth. I never seen a cement piece look like that. And I have seen a lot videos like yours. What do you think is the key for that? Thanks.

gorgeous 😍😍😍😍

@ksentials4442

2 жыл бұрын

Thank you! 🙏🏻✨

Great video 💕🙏

@ksentials4442

Ай бұрын

Thank you!

Whooooooa how those gold flakes get in there? That’s awesome ❤️

@ksentials4442

Ай бұрын

I place them on the silicone mold. I have a video showing how 👍💕

Beautiful 🎉

@ksentials4442

2 жыл бұрын

Thank you!! 🤍✨

@YanirisTarot

2 жыл бұрын

I tried making similar jars with silicone molds, how long do you let the cement cure for before removing it from the mold? Mines tend to crack not sure if it is the type of cement I purchased. Great jobs one your molds they look very nicely done and would look beautiful as a decor piece ❤

@ksentials4442

2 жыл бұрын

Hi Yaniris, Thank you sooo much for your feedback. ✨ I typically de-mold within 4-6 hours of casting the molds. Since the cement tends to sweat during the curing process I like to get them out of the mold ASAP. What brand are you using? I'm currently working with Cement All and it has been great! I have also found that the amount and type of water maters. Try using distilled water. I live in florida, and have used both sink and distilled water to cast my molds. Both have worked great. I hope this info was helpful. Let me know how it goes.

@YanirisTarot

2 жыл бұрын

Thank you so much for your tips and information. I will try switching the cement, I have a feeling it is not great my mold tend to crack as I am taking them out. Sometimes they are uneven and have air bubbles. I do tap down and try shaking it to get bubbles out. Most likely it is the cement. Thank you again for your help and videos☺🤗

Its so beautiful. Even i want the mold , where can i get it. Even i wanna try its so interesting .

Lovely jars! How did you get the gold leaf inside the mold before pouring the cement? Love that effect!

@marciaajoseph

Жыл бұрын

You put the leaf in the silicone mold before you pour

Could you give me some advice? I’ve began making tester jars and I made a brown slightly darker than yours and it isn’t as smooth. The it has a ashy tint to it . Also, I just demoulded another one this morning and the color is darker in some areas. When mixing my pigment, cement and sand I make sure to mix dry first and then to a pancake consistency when adding the water. I’m losing my crap 🥹

Could you tell us where you got the moulds that you use in the video please? They are lovely, and I am wanting something with support while they are drying.

@ksentials4442

Ай бұрын

Thank you for your feedback 💕 The molds are from Modern Craft Lab.

Does MICA work? And why did you add the first chemical to it? Just got into making Candles and decided to make my own Unique containers.

hi! Your molds look different than the ones linked, where can i find the blue molds with the mold supports? Loved your video, thank you!

@ksentials4442

Жыл бұрын

Thank Jess! Yes, I was making them for a season and recently changed the vessels. I purchased the mold from modern craft labs.

Great video! Where can I get the mold covers that u use on the outside. And are they necessary for every mold? Ty so much.

@ksentials4442

6 ай бұрын

Hi, these came with the molds. I purchased them at The Modern Craft Lab. Not every mold brings a support, however, I do find it practical since concrete expands during the drying process. The additional support helps maintain a consistent shape.

Muito liindo seu trabalho, parabéns

You got that dark vessel using mica? I’m impressed.

@diannekelly3319

Жыл бұрын

No it’s impossible it is direct color pigment iron oxide with mica maybe in it to

@jennifferthompson7921

Жыл бұрын

@@diannekelly3319 she actually responded saying she did it with mica in my comment below.

@diannekelly3319

Жыл бұрын

My bad I wish I could get that beautiful color from mica have tons now I have to get pigment and they are not all created equally smh . Good crafting

Hi, thank you for this amazing content. I’ve been testing so many different wicks in my 3in tulip but none are working. I tested ECO 6-14, CD 6-20, LX22 & 24, Premiere 770-799 and HTP 104, 105, 121, 126. Do you have any suggestions?

@ksentials4442

2 жыл бұрын

Yes! But it truly depends on the type of wax you are using. I use golden 464 soy wax and eco 4

@paulmitchell8312

2 жыл бұрын

Hi sorry new to this communication so not sure if I am out of bounds by responding to your question. Try CDN wicks #6,7,8 I was like you until I found these wicks. Works perfect for my 3inc ceramic jars. Cheers

@abdlrhm

2 жыл бұрын

@@paulmitchell8312 thank you for the suggestions. Truly appreciate it. I will try those out.

@abdlrhm

2 жыл бұрын

@@ksentials4442 thank you for responding. Truly appreciate it.

Nice. What size molds are you using,? Are they from Modern Craft Labs?

@ksentials4442

2 жыл бұрын

Thank you! Yes they are! 3" tulip and 4" tulip short

Hi, what did you use to get gold pieces on your jars?

@ksentials4442

2 жыл бұрын

Hi Tina, I added gold leaf to the silicone molds. Here's a video I created showing how I add the gold leaf to the molds, while the molds are different, the process is the same. Check it out! kzread.info/dash/bejne/lJapzMWsZJTcerQ.html

They look great! Where did you get your color pigments?

@ksentials4442

2 жыл бұрын

Hi! 👋 I get mine at Direct Colors. directcolors.com/pigments/

@franchiseplaya75

Жыл бұрын

@@ksentials4442 are these pigments specifically for cement or can you use micas that you use in resin?

@ksentials4442

Ай бұрын

These are specifically for cement use

What size are those molds? I love that look!!!👍

@ksentials4442

2 жыл бұрын

Hi T, these are 3" and 4" molds.

@t.mccullough2240

2 жыл бұрын

@@ksentials4442The concrete, the color, the size of the mold, you got me right after the peel of the silicone 😂😝 KEEP DOING YOU!!! If you don't mind me asking how much do they hold?

Good morning do you seal your jars outside.

@ksentials4442

2 жыл бұрын

Yes, but only the bottom of the vessel, where the warming label would go

Hi, what do you use to seal your jars?

@ksentials4442

2 жыл бұрын

Hi Vicky, right now im using the water base sealer from Earth Safe Finishes.

What are you using to seal? Thank you in advance

@ksentials4442

2 жыл бұрын

Hi Tasha, I use a water base preserve /sealer. Check out my last eat video to see how I seal my jars.

Hi do you have a link where I can purchase these mold online?

@ksentials4442

Ай бұрын

Yes, In my description. The molds are from Modern Craft lab

How much galaxy did you use to get that color?

@ksentials4442

2 жыл бұрын

Hi Jennifer, I used approximately 2tps and 6oz cement. (half of the 12oz solo cup)

Hi. Any powder Mica mark can be use it? Thanks

@ksentials4442

6 ай бұрын

Preferably one specialized for concrete to get the best results.

Where do you get the concrete molds from?

@ksentials4442

6 ай бұрын

I purchased these online. Check out the description for supply details

can you use these pigments on hydrostone?

@ksentials4442

Ай бұрын

Not sure, the pigment mica I use is for cement/ concrete grade. It's from direct color

What ciment did you use?

@ksentials4442

2 жыл бұрын

Hi! I use Cement all, Rapid Set

Is it the same as used in resin

@ksentials4442

Ай бұрын

The one I'm using is cement/concrete grade from direct colors

What kind of cement are you using

@ksentials4442

9 ай бұрын

I'm using cement all, it's a quick dry blend. I purchased muñe at Home Depot.

Is that gold foil

@ksentials4442

2 жыл бұрын

Yes, it is!

Is this made using white cement?

@ksentials4442

Ай бұрын

Yes, white 👍

HI what is source to get the moulds Thanks

@ksentials4442

2 жыл бұрын

Hi!! I purchase mine from modern craft.

What do you use? It would be helpful if you wrote the name in English

@ksentials4442

6 ай бұрын

Hi!!! I do write the info in English 😊 maybe you need to adjust language settings on you tube... just a thought. Let me know what you need and I can respond here :)

Thats not concrete... its cement

@ksentials4442

2 жыл бұрын

Hi! Thanks for clarifying. Many crafters confuse the two. I'm glad you know the difference. The coloring process will work on either cement or concrete.

@asenn5627

2 жыл бұрын

@@ksentials4442 if you put some sand will be more durable. Only cement its not the best option.:)

@ksentials4442

2 жыл бұрын

Thank you so much for sharing. I'll give it a try.

So you don’t measure anything?

@ksentials4442

Ай бұрын

Yes, measurements are appear in video, lower left corner.