pro tip, dont cut toward your fingers and you wont cut yourself. Was taught this as a small child, has served me well.

@ROBNOB9X

7 жыл бұрын

It's a good tip, although I cut myself actually doing something non-related before the video with a different knife so my luck's still holding...for now lol

@mlggameryolo6132

7 жыл бұрын

Samuel Porter same here

@davidecastelletta9648

7 жыл бұрын

ROBNOB9X fuel???

@xnxxdeezy7358

7 жыл бұрын

Samuel Porter no shit Sherlock I have a bunch of knifes pro tip: don't say pro tip bc ur or only not a pro

@samuelporter9477

7 жыл бұрын

Eclihpse AK This is the most hilarious thing I've heard. Thanks for the laughs. A small child is telling me not to state the obvious because he has some knifes under his mattress which now qualifies him to regulate strangers. Fully grown and highly trained people.

The one I bought had a 1.5 min spin time. I cleaned it and now its only 45 secs.

@emresahin7151

7 жыл бұрын

Hi is a lie.

@bradharper9282

7 жыл бұрын

What's that?

@ROBNOB9X

7 жыл бұрын

If you're getting that spin time already then defo no need to clean them out. This is more for if your bearings are only getting several secs spin.

@doughy_

7 жыл бұрын

Brad Harper mine was 1 minute now it's 1.276 seconds

@WT6961

7 жыл бұрын

Mine was 6 minutes now its 7 minutes cause I rodent clean it lol DONT CLEAN YOUR BEARINGS the grease keeps the bearing from rusting.

when the acetone is in your parents room but their asleep

@ryandeleva5497

7 жыл бұрын

NQSL Jay R.I.P

Should use that grease remover on McDonald's

@Pamven

7 жыл бұрын

Lmfao.

@ROBNOB9X

7 жыл бұрын

Haha genuinely interested in trying this!

@toastersmaketea937

7 жыл бұрын

they do...

@HoangDX123

7 жыл бұрын

Lamelo Ball i

@sergioguerra680

7 жыл бұрын

Lamelo Ball lmao

Idk why....but you have a soothing voice....I could go to sleep listening to it....

bro you're the BEST!!! i tried and it worked thanks bro you're aawsome!!!

3 Days after buying a fidget spinner it only does up to a 5 sec spin, but after watching this video I managed to get it to a 1min spin :D Thanks!

I just noticed these are the same exact bearings that I got from my skateboard

thank you I tried this and it worked!!!!!!I subscribed

I have a brand new $30 spinner that only spun for 30 seconds. I checked the bearing and sure enough, it was rusted so I soaked it in white vinegar for an hour and all the rust came off. I then soaked the bearing in isopropyl alcohol (rubbing alcohol) to clean the bearing and then dried it with a hair dryer and now it spins for 2-3 minutes.

@rodrobosa655

7 жыл бұрын

does it really work? i accidentally put powder onto my spinner's bearings and now its fucked up

@KokoandFooFoo

7 жыл бұрын

Yes, it works. Vinegar is acidic and will loosen the rust and dirt in your bearing. Rubbing alcohol will then clean the bearing so that it's smooth and free of residue. When soaking, use a toothpick and spin the bearing several times while in the vinegar to free up the rust or dirt. Repeat this toothpick method when you soak it in alcohol as well. After soaking your bearing in vinegar and then rubbing alcohol, thoroughly dry the bearing with a hair dryer. If you want your spinner to spin fast and long, the bearing needs to be clean (people make the mistake of putting oil into the bearing because they think it will make the bearing more smooth. This is incorrect. Oil attracts dirt and dust and will get thicker in the bearing which will slow it down. If your spinner is noisy when it spins, you can add a very small pinhead drop of machine oil to make it less noisy but adding too much oil will slow down the spinning.) I would recommend pure white vinegar and rubbing alcohol because they're not harsh and do not contain additives or particulates that may gunk up the bearing. If you use strong industrial solvents, it may also corrode the bearing.

@rodrobosa655

7 жыл бұрын

I tried it but now the duration of the spin is 30 sec i guess im doing it wrong -_-

@rodrobosa655

7 жыл бұрын

I just brushed the bearing's rust is that fine?

@rodrobosa655

7 жыл бұрын

i dont have a hair dryer is that fine

To the owner of the video: I love your voice ... very smooth

Anyone else going crazy listening to this kid

What Abec bearings did you use for this video. I found some abec-5 bearings in my attic and decided to make a fidget spinner. I did all these steps and it seems to only spin for around 20 secs.

I suggest a citrus degreaser. I used an orange citrus degreaser on my bearings from some really old roller blade bearings, and 4 out of the 8 I had spin for more than 45 seconds when I put it in my 3D printed spinner. One spun for over 2 minutes, and another spun for over 3.

You can use lemons, they work well, and also acetone works. As well as olive oil, there's a lot of things that work.

@ayalaa6455

6 жыл бұрын

The Beast Incarnate Brock Lesnar why would you use lemons

I subscribed you your the best you made my spinner stay for 3min thank u so much

NAIL POLISH REMOVER WORKS AMAZINGLY

@ROBNOB9X

7 жыл бұрын

Nice idea.

@wrench6746

7 жыл бұрын

Lauren Bloxgell no it will fuck it up u need skate lube

@richardsebert6708

7 жыл бұрын

Lauren Bloxgell I will try that

@flaxx_hidayatulloh

7 жыл бұрын

Lauren Bloxgell it work or not? because my spinner is so noisy

@Pays7

7 жыл бұрын

Did it work?

love your vids,it worked

I boughht a fidget spinner from 7 11 ( the gas station lol) and it was broke when i bought it, and only spins about 5 secs. But after watching this video, im not going to need to return it :)

@ROBNOB9X

7 жыл бұрын

Nice :-)

@erikpayne8202

7 жыл бұрын

anonymous user did you fix it?

@unk982

7 жыл бұрын

Aidan Sullivan for me it would spin for 16 secs but I just kept spinning and now it spins for 2 mins

@alpharunner

7 жыл бұрын

Aidan Sullivan wow, I bought one from 7/11 too and I joke you not it spun for 4:22. Idk but after 2 days it started making weird metal grinding noises and Idk how to fix it

@kathiescavone9269

7 жыл бұрын

dude same

so, i got a fidget spinner like yours but the little blue things you have on your bearings are black on mine, the cap of the bearing, as example: the blue thing that covers the beads, keeps falling off and it really annoys me, is there a way to fix this. REPLY

That rubber type thing around the ball bearings, does that melt if put in alcohol ?

Hello, when i removed the cap, I removed the iron protector that makes the spheres together, is that a problem? One of them fell apart... Thank you!!

@beastplayzpvp3326

7 жыл бұрын

Vinicius, those balls inside the bearings are important that's what helps the bearing spin. It's fine if only one came out but try to be careful with the bearing!

@pixelmz

7 жыл бұрын

I mean the frame that hold them together felt, I think I just lost all my bearings because of this, they are all loose inside the bearing frame. I just got 16 bearings from a Rollerblade that were on my attic since 2010 :(

@jackbaldwin2092

7 жыл бұрын

BeastPlayz PvP those balls are the bearings!

@johnjohnson7261

7 жыл бұрын

You broke the bearing, nothing you can do about that

@sleepchaser4964

7 жыл бұрын

John Johnson, yes there is.

This video really helped, my spinner was squeaking like a rusty bike

Will this remove superglue. I tried to stick my broken spinner and glue went in the bearing.

nice 3d prints on those Fidget Spinners

can i use 70% alcohol for cleaning that bearing cause its little bit hard to find rubber cleaner in my country

The "gunk" on the bearing works as a lubricant so when you remove it the metal parts touch each other more so the bearing might get damaged after a while

thanks m8 that actually helped me soo much :)

Does this means it gets back to slow once again after couple of hrs or days from being cleaned?

5 minutes before watching this video I cleaned my bearing. what I did was opened my bearing's upper part which he opened and blasted it with water. and it got cleaner then ever.

My bearing is way smaller than the circles on the sides is there any way to make this kind of spinner go faster and longer? Can anyone help bc I couldnt find any videos

can you use "Awesome Cleaner". its a cleaning product and it cleans just about anything out, but just wondering.

did you 3d print the fidget spinner plastic (no bearings)

can i use nail polish remover? will it make the bearings rusty?

The reason those bearing covers dont come off easily is becouse those are not meant to be taken off (if i see correctly). Good bearings have covers that dont take much effort to remove.

@Twinkiesgaming

7 жыл бұрын

VIP-Design True ahaha

@ROBNOB9X

7 жыл бұрын

Fair enough, these were just really cheap ones so I could mess around with them. Spent the rest of my money on printer filament lol

thanks this really worked on my fidget sp5

@ROBNOB9X

7 жыл бұрын

No probs :-)

thanks man. it works.

The real fix is a device specially made to clean the small bearings - Sector 9 Antiseize Bearing Cleaner. It includes a tree to mount the bearings and degreaser. Then you top it off with Sector 9 Bearing Butter and your spinners will be moving quickly and for longer.

Hey guys i found if you take the two caps off of the spinner and place the spinner into a glass( dont let the fidget be smaller than the glass) fill the glass up just above the spinner with hot water NOT BOILING WATER for 5-10 minutes,you dry it off and place the caps back on the spinner will be more smooth to spin, ( reply if you did this I wanna know if it worked as well for you guts😊)

Such a good vid

What is the name of the cleaner?

I just put and rubbed some tap water into the barring it works just as good as new for mine no oil needed.

I prefer not to use wd40. Each of the bearing's ball surface somewhat very smooth like coated. I tested using dry silicon grease (also tested wd40 as well) and compare it to without lubricant (i just clean the bearing using thinner A Special liquid and dry it with hairdryer). The result is without lubricant is smoother and longer spin time (but a little more noisy)

@danielwilliam2873

7 жыл бұрын

the noisier your spinner the longer its spin

@cadenrae9328

6 жыл бұрын

Wd40 has water in it it’s water based it will rust your bearings over time don’t ask why I’m watching this after fidget spinners are out of style it’s for my scooter wheels

Great video

what do you do if the bearing cage is rubbing the frame?

When you spin it, why does it still look like it's 3 sided, like when i spin mine it just looks like a circle, but your sides appear when you spin it.

u can use zippo for remain the bearing,,, or use "standard" contact cleaner for spray

I suggest using any type of oil, for me vagtable oil works the best or baby oil any kind would work my spines used to be really loud but I let them sit for 1 or 2 hours before I left for school they may smell like oil but I don't mind

Thx for the video helped alot

You have a great youtuber voice

Thank you sir!

I can't remove my middle bearing in my TRi spinner what can I do

Thanks m8! Thank you so much.

What kind of liquid is the Ubik 2000 ?

I did with turpentine it spinned like 6x more but after half hour it didn't spin long anymore

Thank you dude

it really works

from where did I can get that liquid

If you want to clean it just put some thinner over it and clean with ear bud it really works

Can you do nail polish remover

it worked

i buy a new spinner and its spin 2.5 min , and then i give a wd-40 on my new spinner , and its just spin for 30 second. Are you have any solutions , to get back my spinner into 2.5 min spin?

@Connor-wf2zn

7 жыл бұрын

Audyna rs it's to thick of a lubricant, put the bearing in 100% acetone for around 8 minutes and it'll take off the wd40 then let the bearing dry

my spinner spin time is 4 minutes 30 second after i put some grease it make it slow and only spin for 40 second how i want to fix this?

my friend said use nail polish remover and now it only spins for 28 seconds instead of 1 minute and 28 seconds how do i fix this

doesn't removing the grease increases the friction?

wre did you buy that 2000 syuff

My fidget spinner is crackling I don't know how to fix it

can thinner clean it?

how much would a bearing cost

I just used my skateboard bearings and now it works much better lol and then I used the grease remover and I got like a 4:56 spin time

how can you take this off?

guys all I did was take the cap off and rinse it with water after it only spun for not even 30 seconds so try that first also use twesers to life the cap off!

if is rusty? what to do

Thanks bro for this video...

@ROBNOB9X

7 жыл бұрын

No problem :-)

Pls help me how to make bearing my bearing was lost yesterday😭😔

THANK YOU

Why does my new spinner have a really small bearing? It's like the width if my pinky. Is it good?

@zekeschriver1554

7 жыл бұрын

Neetu Sharma yes it's alright. There isn't only one type of bearing you know

@neetusharma3234

7 жыл бұрын

BurjYT thanks. but is it better than the regular one?

You all can wash your bearing with the water...then,you must dry your bearing with the hair dryer..make sure u make the bearing super dry...I had tried this before...my spinner spin from 49 sec to 2 min...If the bearing get rust...u can clean them with coke..btw sorry for bad english

thank you it worked

@ROBNOB9X

7 жыл бұрын

No probs, thanks.

You are too! Talkative

Can you show us how to get the bearings off the spinner?

@ROBNOB9X

7 жыл бұрын

If they're glued in then you'd have to dissolve the glue or something otherwise you'll probably need to push/bash them out but you may risk damaging the bearing unless you have another one to replace it.

What happens if you want to put the thing back on the bearings

@ThatGuy-fw8uu

7 жыл бұрын

Thrn your skrewed

My fidget spinner is crazy, last night when I tested it it spins for 2 mins then now it spins for 20 seconds tell me how to fix it pls.

i had a 1 dollar 95 cents SGD in singapore,it still spins for 3 min after so many months,those made in china ones,no bearing on the edges,only center,pure metal

Pro tip; wear safety glasses before trying to pry a grit cover off a bearing with a craft knife.

@danielwilliam2873

7 жыл бұрын

i've broke my box cutter knife 3 time

I've cleaned my bearings out, but they only spin for about 5 seconds, what can I do to improve this time? EDIT: I just watched the rest of the vid, and it shows that the bearing spins faster when you put it in the spinner, but I'm planning to make a homemade one, so what do I have to do to the spinner itself to make it spin fast?

@ROBNOB9X

7 жыл бұрын

Make the spinner as symmetrical as possible and add weight to the ends, like where I have other bearings in there, these are there to add inertia which makes the spinner spin better. Good luck.

@ariankagrand4467

7 жыл бұрын

Thanks! So far I've made 3 models, and my best one spins for 15-20 seconds. The problem is, I'm carving it out of cardboard (the base) and It's kinda hard, so the shapes aren't very symmetrical, so; even though the weight of both sides are very close and I've used a file to even it out, It's really hard to make it very symmetrical.

@ariankagrand4467

7 жыл бұрын

I have another problem, and it's that as soon as I clean my bearings, they can spin for up to 30 seconds, but after spinning it around 20-30 times, the spin time decreases down to 14-17. Why is this happening?

is there any alternatives for the Ubik 2000? Let me know if there is. Thx

@ROBNOB9X

7 жыл бұрын

Hi, Yeah if you google "Degreaser" or search it on Amazon then loads of brands come up. I just chose this one because it was on Amazon Prime and a good price.

@hello_awesome2175

7 жыл бұрын

thanks you're the best. :)

Would it help to clean out the side ones

@ROBNOB9X

7 жыл бұрын

Nah those ones are just used for their weight, not for actually spinning.

or you could just get better quality bearings to make it spin better

@ROBNOB9X

7 жыл бұрын

Depends how much money you want to spend though.

@TitanBeats

7 жыл бұрын

well High Quality bearings normally cost 5-10$ for a package with 4 bearings

@goonygaming3390

7 жыл бұрын

TitanBeats no most packets of bearings come in packs of 8 for skateboarding

@mohammedmohsin9414

7 жыл бұрын

use ceramic bearings . they provide better movement and smoothness

@Korosensei52

7 жыл бұрын

i use skf bearings on my spinners and they are probably one of the best bearings you can get, that are non ceramic. when a bearing is new, they always spin for a not so long time. its totally normal.

Doesn't removing the grease ruin the ball bearings inside after a while?

@ROBNOB9X

7 жыл бұрын

I'm not too sure tbh, perhaps as there's not too much weight/pressure on them they'll be ok. This is more for fidget spinners though rather than doing it for your skateboard or something.

I use really small bearings on my spinner and i get over 4 minutes of spin (spun by hand) and it makes lots of noise but it works really well. BTW anyone know how to get rid of the noise?

@ROBNOB9X

7 жыл бұрын

Have you tried WD40? Mine made a little bit of noise until I used that.

@Fibly

7 жыл бұрын

ROBNOB9X I'll try that

My bearing is new and it still squeaks and stops no Greece or sticky stuff in it NOTHING

shet my fidget eggs are so small thanks to you man you help me alot

@pizarr0107

7 жыл бұрын

oohh shet just got bought a fake one thats why it is small EGGSSSSS!!!! OH MAN!! GUYS HELP TRASH OR KEEP you guys decide

@coolnesscooley6622

7 жыл бұрын

PIZARR010 keep

@yousefessa4574

7 жыл бұрын

PIZARR010 wtf..

guys try WD-4D it works soo good jsut three coats/sprays thick and it improves it 50% for homemade ones :) hope this helps

you can also use window cleaner

Use dish soap but make sure it says super degreaser and Dr after

Bearing kis dukan se kharidu

thanks

this grease are there for some reason do you know ?? :).... (the name is oxidation).

how to remove bearing on fidget spinner?