WOW! Super useful video! I have an old ENA 3 that we got as a gift that had stopped working for the past month. Managed to get the front off. Filled the sink with brown goop. I don't know how we managed to get a decent coffee out of the thing with all that stuff clogging the insides! Thanks a bunch!

Thank you very much for your clear explanation! This part doesn't belong to the standard cleaning/maintenance. We just cleaned this part and were shocked of the debrie that came out there. But, after 14 years (!) that's not strange... We still very much appreciate our Jura Ena 5! 😍

Thanks Milen! I often cleaned my E7 and was always annoyed it never produced clean water at the end of the cleaning cycle, even after 5 or 6 times in a row. Once I followed your video instructions on cleaning the dispenser it did!. I wish Jura would design this part so the user could clean it easily as general maintenance. Thanks very much!

Spot on instructions Milen and cheers for posting this video, after experiencing poor coffee dispensing for the past week then today signs of coffee spilling out the side of the spout I searched the internet and found your video instructions. A quick 5 minute cover removal then hot flush and clean, the spouts are now debris free, clean and dispensing coffee 100%. Cheers.

Thank you so much! Our Ena5 was leaking from the "seams" of the dispenser and this solved the problem perfectly. Very clear instructions and you just saved us a whole lot of time and money - hopefully now the machine will last for another 10+ years :)

Thank you soooo much Milen … my coffees were slowly getting worse and I knew coffee debris was the culprit … your video helped me clean my wonderful ENA5 back to new … also when removing the dispenser, it pays to rock it forward slightly then pull up, makes it easier to remove cleanly … there is great satisfaction in DIY maintenance ❤️😃

Thanks, Milen, just what I needed for my very old, neglected Ena5. It was disgusting inside. Used a toothbrush and multiple hot water rinses right inside the rotating part as well plus gentle use of scalpel to help remove the coffee stains from plastic bits. The holes at the bottom of the black thing were totally jammed up so I used the head of a pin to poke it out - so much solid gunk. This explains why my coffee was never hot enough, it was mixing with the old. Well done!

i have the ENA5. it's almost exactly the same as the ENA7. now mine all clean thanks to you!

Thank you so much Milen! I just saved my Ena 3 and my purse from a trip to a very expensive service center!!!! 👍🏼👍🏼👍🏼

Lots of thanks for this video. Just cleaned the dispenser for the first time in many years!! By the way, the tool to open the cover is mounted on the back of the dispenser :-)

Thank you Milen, this was an awesome video. For anyone cleaning this part out remember to also check the silver down spouts under the black part. They can also get clogged with buildup. Finally pay attention to the two small tabs on the bottom part of the cover, if they don't get aligned into the slots at the bottom part of the machine they can bend and get in the way of installing the cover back on. I bent one because I was not paying attention and had to break it off to get the cover back on.

@kukulaka

Жыл бұрын

Yes, I'd like to give that bottom part a thorough cleaning as well but have not figured out how to remove it. Has anyone managed to do this?

@boroleanudan545

11 ай бұрын

We cleaned the other part above the sink with some sticks made from wood and then wash it. Thank you for this video

Milen, you are a star! thank you so much for that very clear and very helpful video. Your instructions were easy to follow and worked brilliantly. The goo that was inside the coffee dispenser was horrible and now the coffee has a lovely crema. Interestingly, as you mentioned, the machine was not working properly after not being used for over a week. Once again, many thanks. Alan

I have been looking for a video explain how to clear blocked dispenser for ages thank you

Thank you! Finally a decent video! Health and prosperity to you, good man!

Thank you very much, I just cleaned my ENA following step by step your video, fantastic !

This was very helpful. Clear instructions that I used to successfully clean my Jura 4. Thank you.

Thanks man opening the plastic cover was a pain in the ass but it was downhill from there. Now my 15 y.o. Jura ena 7 works great again

Thanks for posting, I had blockage in the dispenser and cleared it! Saved me a service!!

Thanks you so much! The same method works on the ena 5 and saved us from paying 299 euro service costs.

Big thx My ENA 7 did need this info

Thank you so much Milen!!! 🙏🏻🙏🏻🙏🏻

Great video. Followed exactly and managed to clean all the bits in the spout. 👍

Thank you so much!!! You just saved me the time and expense of the service. Very much appreciated

Extremely helpful! Solved my problem immediately - thank you!

Thanks to you my coffee machine Ena5 works fine for many years 👏

Wow, made a big difference! Thank you very much for the tip!

Thank you so much.... This was so helpful

Thanks !!! it's works for my ENA4 . Save me money and time . Fonctionne aussi avec la JURA ENA 4, café coulait seulement d'un coté !!! Merci !!!

Thank you very much. It helped me a lot.

Thank you so much, you made my day 😍😍

Thx a lot! You just secured many more cups of nice coffee for me! :D

Also thank you, i have just cleaned the machine with your video👍👍

Thank you bought second hand and followed your advice it was cracked in coffee I was surprised how much came out thank you

Thanks, worked out great. Having good espresso again.

Amazingly simple!! Thanks a lot!!

Good tip! thanks for that, I had no foam, hope this works !

thank you, I couldn’t imagine that it is so easy to open it and clean it. So duty before I clean it.

Thanks very much - has made a huge difference to our coffee!

Thank You Milen :)

You explained that the locks are on the bottom, and you showed a great tool so that you don't damage. But I don't know how exactly we use this tool, Should i push it in?? pry to the front? Pry to back? Something else? I really appreciate the video but it would have helped me if you demonstrated how to open it, instead of only demonstrating how to close it- which looks very easy. The plastic cover breaks very easy! I wish could have found a decent video on how to open before I cracked it.

Thank man! Clear and clean.

What also being a good idea are using guitar plectrums (pick) to open plastic parts.

Thanks for this. There is another excellent “deep clean” video but it skips this crucial part on how to disassemble the dispenser without breaking the tabs …

Thank you so much Milen 🥰

Fantastic information, thank you

How can i take off the rotating part under it?

@kukulaka

Жыл бұрын

Also wondering this, I can see some clogging there, not easily dealt with while it's on the machine.

Thank you Sir. You sound a lot like Ayrton Senna !!

Thank you so much for this🥰🥰

Thanks so much! I was wondering how to do this for a while now :-)

You are the best !!!!!

Thank you so much. 👍

Thank You, friend, just saved me from 100 euros professional cleaning fee...

hello , please tell me how can i do decalcification?

I have ENA 9 my machine have a problem when I using time automatic turn off what is a problem this kind thank you

Thank you!!

How can I remove dispensers to clean them on ENA 3? Don’t you have some video about it?

Extra! merci beaucoup

Thx a lot.

Thx... good job.

The black part you unhooked from the hose looks like it is composed of two parts. Any idea how to separate them? That would help cleaning it out. i've tried without success.

@scottpiette8977

4 жыл бұрын

peter_c have you tried to clean out what is under the black part. I found mine was clogged and I needed to clear the silver part that is under the black part. I used a plastic zip tie and pushed it up from under, rinsed, and did it over and over again to clear the two drip spouts. You can also push from above once you can see light thru the spouts. You can also rotate the spout to get better access to cleaning. Hope that helps!

@peter_c

4 жыл бұрын

@@scottpiette8977 It's been a while, but I did clean the thing out as much as I could. Most of the nasty buildup was in the black part, and I don't think that comes apart. I forget what I used, something long and thin. Probably would be best done in an ultrasonic cleaner. But the lesson is not to use really finely ground coffee (I think it was a brick of vacuum packed something).