How to clean ATV motor | Remove mud stains - MUST SEE
Тәжірибелік нұсқаулар және стиль
Today i try a product by Napa (Mac's) called "Aluminum Brightner". This stuff works and is no joke. Do NOT leave on motor for more than 20 seconds and rinse off immediately after that to insure product is diluted well. Make sure to wear proper safety gear (ie Eye, hands & mouth) protection at all times when using. Do NOT use this on painted surfaces or shiney aluminum surfaces. This product works best and safest on "Cast aluminum" with NO finish or polish. to get tougher stains you may need to carefully use a brush to agitate surface lightly and use several coats and rinse repeatedly. After using product and happy with results (I recommend running motor in a well ventilated area) unit motor is completely dry and all possible resiude is evaporated off.
Read directions on product carefully before using and all the dangers of product as i am NOT responsible for misuse of this product.
Thanks for watching and if it was helpful please like the video and drop a comment below!
Пікірлер: 49
Please consider subscribing and share any tips and suggestions with me. I would like to say I have gotten alot better with making videos since I uploaded this 8 months ago.
Looks awesome!
Thank you for the video, just what I have been looking for.👍👍👍
@DGCoinPusher
4 жыл бұрын
Just be careful with it and you will have good results
Looks good!
Easy off foaming oven cleaner works amazing
Reminds me of condensing coil cleaner for ac unit. It reacts with aluminum then, foams, lifts off dirt leaving shiny.
@DGCoinPusher
2 жыл бұрын
Interesting!
@tosc6004
Жыл бұрын
Very interesting. I have a can leftover from doing the RV a/c fins. Did you ever try it out?
great job!!!!
@DGCoinPusher
3 жыл бұрын
Happy Thanksgiving!
It works the way your doing it but you could add an extra 1% but agitating it with a toothbrush or something
That’s the stuff we use on are lie floors it’s strong but scrub it with a stiff brush
Buy a dedicated detail brush for in between the fins and removing soil.
Toilet bowl cleaner and a brush will do better than that and it's thicker so it clings to it just don't leave it on there for a long time squirt it on brush it let it sit for 30 seconds and rinse with pressure washer
@harrysheldon7897
Жыл бұрын
what kind of toilet bowl cleaner do you use thanks
@lakerdigital
3 ай бұрын
What brand of toilet bowl cleaner?
Long term review, does it start to eat away plastic it rubber ? After washed a couple times?
How do you like the sunf tires have the same on a Honda 520
@DGCoinPusher
3 жыл бұрын
They tear up stuff just ask my dad.. lol jk but seriously there fair priced (or was) when i bought them.
@troye.1309
3 жыл бұрын
I bought a set of 26's last year and liked them so much that I bought a set of 27's this year. I run 5lds. In them and it's a very comfy ride.
Use a paint brush to scrub the cases n head
@DGCoinPusher
3 жыл бұрын
Thanks! I have definitely discovered that a simple paint brush actually can clean alot more than you think!
Would this work on the exhaust header
@DGCoinPusher
2 жыл бұрын
No only aluminum
Those air cooled are the hardest to clean
@DGCoinPusher
3 жыл бұрын
Until you use this method lol
@kevinfoster2308
3 жыл бұрын
@@DGCoinPusher I did! I used pontoon aluminum cleaner and its looks almost new. Did my differential cases too.
Hey buddy, I have one question. Are you just using straight bleach or is it mixed with somthing
@DGCoinPusher
3 жыл бұрын
It's not bleach.
@njkay0033
3 жыл бұрын
Did you watch the video?
@Riley.m565
3 жыл бұрын
@@njkay0033 yeah but there's probably a mixture in it
Where did you buy that ?
@DGCoinPusher
3 жыл бұрын
Napa store!
@DGCoinPusher
3 жыл бұрын
Be careful with it. It works great but if you just leave it on for more than a few minutes it will start working too well
@jankee991
3 жыл бұрын
Im from Puerto Rico and the shipping is 23 dollars is crazy 😂
@DGCoinPusher
3 жыл бұрын
@@jankee991 that's outrageous!!!!
@jankee991
3 жыл бұрын
You know about other thing that can work ?
Purple power works almost the same just spray on wait a minute and wash off
@DGCoinPusher
3 жыл бұрын
I did try that actually! and it did get most of the dirt off. Appreciate the comment and thanks for watching. 🙂
Spray it with white vinegar.
Yea I wont be using anything like that , it will put pits in the engine , if yae keep using it and after a while you will have oxidation problems anywhere you put that shit , good old elbow grease and dish detergent , and soft bristle brush or two lol
@dmo848
2 жыл бұрын
Right. I'm in there with a damn tooth brush but it does a damn good job if u take your time
@DGCoinPusher
2 жыл бұрын
I agree with that
@shredder_mang3211
10 ай бұрын
This is definitely just for restoration and you should def clean and polish after this so it doesn’t reoxidize and keep it clean
@jonathangaliano2617
6 күн бұрын
@@shredder_mang3211 What is a good all purpose cleaner to use on ATVs, motorycles, etc? I just got an 88 Yamaha Moto 4 350 last week and slowly going through it fixing some stuff up and cleaning it real good. Did the same thing with an old XJ650 I have so I already have tons of brushes but never really know what's the best thing to use to clean? Looking for something that I can use on mostly everything.. metal, plastic, engine, rubber, etc. I actually started using WD-40 for some stuff and it seems to work pretty good but not sure how much it's gonna hold dirt and gunk once it gets riddin. As crazy as it sounds when I was sitting on the ground for hours over a few nights cleaning my motorcycle engine.. after using WD40 and some other stuff for a while I tried windex and it worked wayyyyy bettery. Obv I know it's horrible to use on that kind of stuff hence the need for a GOOD cleaner for old gunked up dirty stuff and then how to protect afterward?