How To: Clean and Seal a Motorcycle Gas Tank | Yamaha RX50 Restoration
Ойын-сауық
In this video, I show the process of cleaning and sealing my rusty 1983 Yamaha RX50 Gas tank using muriatic acid and por-15 gas tank sealer! This is a VERY important process, it will save your carburetors from getting clogged up, and could prevent your gas tank from leaking, gas leaks are very bad!
POR-15 Gas tank sealer is bad ass! It can seal pinholes, and even cracks!
Watch me restore a much worse gas tank: • Restoring a Rusty Gas ...
Buy POR-15 here: urlzs.com/BjvqV
Buy muriatic acid here: urlzs.com/AAHV7 (it's cheaper in stores)
I hope ya learned something!
Support my channel for more frequent (and better) uploads:
Patreon: / goldguy
Paypal: www.paypal.me/masonmcalister
Check out my extra parts store on eBay: www.ebay.com/usr/mcalistermoto
Follow my instagram @goldguy_official
Пікірлер: 194
This video gave me ~*Special*~ vibes. Ready to seal my bikes tank now.
Recommendation : place some glad wrap ( plastic food wrap ) or rubber glove; under the gas cap to protect it from the sealer. There is a really tiny breather hole that you DON"T want to block !!!!! . :)
@mobilecellmart7442
3 жыл бұрын
Thank Paul, That tip is very important on other tanks.
Just a tip for you, never EVER shake any sort of coating that you need to use to create an air-tight bond. Your going to create very small air bubbles in the coating and will therefor make it porous causing rust to return. Stir it instead.
2 comments... 1. I lost it when you showed the man and the giant rooster. That was genius. 2. please consider making the font color gold in the opening title “Gold Guy”. To me that is your signature. Love your videos.
Finally, someone who understands that to get a long lasting seal, your prep work [cleaning] must be first rate.
This has been an excellent video. It was so loosely put together that while it was one hundred percent effective, it was also fun and enjoyable. I loved it.
I have done this exact procedure. Works amazing.
I have a 1984 Honda 3 wheeler with a very rusted gas tank along with holes in it. This method was 110% worth it. You saved me a ton of money instead of fabricating it, possibly ruining it and spending quadruple the money!!! Very much appreciated !!
Love how the sound effects match the year of your bike!! :). In reality... really enjoyed and learned! Thanks for sharing!
I own a 1996 yamaha rx100 and it's the exact problem but hey thanks for the additional knowledge I never thought it could be restored👍👍🔥
Awesome videos love to see someone fixing things like I do ( without a million dollar shop and tools)
We use to do this when I worked at a shop a long time ago. It's the only way to prevent rust from plugging up the carb. Once they start rusting, it's done, gotta coat it or trash it.
Great work goldguy good content sure will apply ur knowledge to take on my gas tank love ur skills keep up the good content always and cant wait to see a vid of that tank painted
Just found your video. Now restoring my 1980 Honda PX50. Thanks!
This video was great. It was funny and informative at the same time. Keep it up!
Killing me pushing that tank around on the concrete!
@966Mako
4 жыл бұрын
Thought the same, until he said he was re-painting.
@auctioncrazy8053
4 жыл бұрын
I'm gonna do the same thing I'm scared
@davestrain9529
3 жыл бұрын
OH GAWD im 50 years old DONT Work that SPECIAL tank around on CONCRETE!
@krotchlickmeugh627
2 жыл бұрын
@@966Mako thats fine. If you really like to do bondo and sanding.
Gosh I love that little Special.
Thank you for making this video. Nice Job!! Very Helpful as most vintage bikes don't have tanks available on Ebay!!!!
Cant wait for the next episode 🛵
Nice. I appreciate the help. Actually the first time I’ve heard of por15 sealer.
I have an old 70 yamaha HT1 90cc enduro I've been dinkin around restoring and when I took the speedo cable off I noticed it looks exactly like the flex shaft from my 2016 Chinese dremel tool! Exactly the same inner rotating piece!!
Thanks for the great video! I have a red 1983 rx50 that I need to do this to, your tips will help me a lot THANKS! I also need to rebuild the carb, that or buy a new one.
Gonna give this a try on my R1 tank before I try and find a new one. Thanks.
@joelmcintyre3061
4 жыл бұрын
Just an update. I tried it and it works. A bit messy and the fumes from the acid tore my lungs a new one. Have done a couple treatments and all but a couple spots have come off.
Haha the cut to the "special" clip kills me every time 😂😂
@vinnymartinez2579
3 жыл бұрын
Yo how do I let it dry cap on or cap of do I rinse after if so what also have you ever done anything shorter than a 96 hr cure
@itssyedfazal
2 жыл бұрын
Same
Thank you for these videos man
Thanks I need to do this to my ts185 gas tank and a pinto gas tank I have thanks man definitely hoing to do it now that I know it works
Awesome video dude this helped me a lot
Great video! 👍
Great fix. Will try next fix.
Thanks so much I've been trying to clean my yamaha xj600s but failed at getting a good clean 2 times I think this will get the job done 3 times the charm right
Great video!!
Nice work
EXACTLY what I was looking for. Much appreciated man!! Can you get the tank sealer at a auto parts store? . Got a new sub!!
On Yer Bike sent me here.
Great job
Really heplful A big thank you ! 🤘
Very good video.
First time seeing your videos. Subbed instantly based off the into 😂
Good work Special 😎😎😎
lol i love when the scissors fell apart you turned them over and they said Harbor Freight lol most people give them shit but most of their stuff is decent for consumer use.
thank you very much for sharing
awesome very helpfull thank you
Sweet vid. I need to do the same with my Yamaha R1 tank. The gas that came out looked more like thin chocolate sauce it was so bad.
Great tips! I've also used a cork I shaved down to fit in the petcock hole which is a little easier to take on and off
@mellamodiego8458
2 жыл бұрын
im thinking of doing cork too….does the muriatic acid eat through it? also ive seen guys do muratic acid for only 20 minutes and say you shouldn’t do it any longer but this guy did it for a whole day…which is right?
@4fiddy_a_aron
2 жыл бұрын
@@mellamodiego8458 the cork held up fine. I even used a synthetic cork which worked just as good. I only had surface rust so I did it about 20 minutes and diluted it, I suppose you could go up to an hour if you had to, otherwise your pushing you luck unless you diluted it with water
This guy fcks.... for sure 😎 Took forever to find a proper gas tank resto video
Came for knowledge left amused
i have a Bajaj pulsar 150 DTSi I will try this. thank you for your tips.
Cant help but laugh everytime the " "special" clip pops up ahahaha good job
Awesome.. Thanx
Thank good info
cleaned out my fuel tank with good ol vinegar and gasoline wash. Topped it off, went for a ride, everything was great. a week later, the bike won't idle. i look inside the gas tank and it is completely rusted, and the gasoline has turned a brown color. gonna follow this exact video, and clean out the carb
Ever tried Tamco gast tank coat/sealer? What are gas tanks usually made of: steel? I plan to extend a Grom gas tank with sheet metal/welding so I'm researching. Thanks for the clip - exactly what I was looking for.
Nice vid GG...a gallon of vinegar,600 bbs, shake every hour, 36hrs, rinse with water, acetone and leave in the sun does a nice job. Zero risk.
@randypullman1155
5 жыл бұрын
Heat gun can melt the glue that holds the tank together.
@randypullman1155
5 жыл бұрын
I leave the tank upside down that way if its thick its thick at the top...out of the petcock area and outta the fuel and in the suns heat
@tristanhickenbottom4372
4 жыл бұрын
You don’t use a sealer at all then?
thx buddy
Just put my first coat on my 09 Yamaha FZ6R and it looks good so far. I’ll put 2 more on then let anyone know. It’s hard finding a video of someone doing it with a modern sport bike gas tank.
Awesome
I'm following you and like your methods. Bravo. I'm doing this method today on my 75 ts250. I only wonder how do you know the sealant is going to work if there's still some rust in the tank?
In the first minute I laughed 3 times. I love this
Muriatic acid is no joke. I use it at work all the time; we use full PPE and always under a fume hood.
@GoldGuyRides
5 жыл бұрын
Yeah it is no joke. What kinda work do you do?
@MotoMango
5 жыл бұрын
@@GoldGuyRides I'm a marine scientist. I work with microalgae and shellfish for NOAA. I use the muriatic acid for acid bathes haha nothing fancy.
@GoldGuyRides
5 жыл бұрын
Wow that's awesome man!
@MotoMango
5 жыл бұрын
@@GoldGuyRides I think so! Thanks man!
I just watch your video about cleaning a gas tank and sealing it. After 3 years how is the tank sealer holding up? I am about to do my tank, acid and sealer and was wondering if the sealer has started flaking off and plugging up your carb or strainer.
tks
I have 1974 Kawasaki Z1. It has been in the carage for 3-4 years now, and I used Annitrol to get rid off the rust. Then "washed" the tank with gas. Then filled the tank and put in the gas preservative, because bike will be without using in the carage. So.... 10min from "gas washing" tank was looking so rusted again. Before that it was beautiful and without any rust anymore. I have been thinkig about buying the kit where come the cleaning and the sealing materials. This is so frustrating that my work for the bike is useless. I did that at autumn and maybe at spring or summer I will buy the kit.
Do you know if the sealer has some heat resistance? Will I be able to powder coated afterworlds? Thanks.
New sub! Bro is sealing the motorcycle fuel tank to get rid of rust the same thing as “flushing” the motorcycle fuel tank?
Muratic acid wont cut thru varnished gas. You might get better results using a fast flash lacquer thinner and let it sit for a few days. Empty then fill the tank up with vinegar. Then rinse with thinner again. After that and you know that your tank is really dry you can treat cote. Also I have a long air nozzle that I put in the tank to see if any stubborn residue is hanging on in the corners.
Super
Hello, Thank you for your help. I am not sure if I can use the sealer. I have a 1984 VF 1000f. The pepcock valve control is operation on the side of the tank, I heard am concerned there might have a tube inside the tank and I am not sure if I should take the risk. I was told . Do you hand antho3 Ok thank
I have a small gas tank which holds about one and a half gallons. So do i put one gallon of muriatic acid and the rest water to the top?
Thank you, that was "special" 😅
Sir after applying the sealant it doesnt rust again....or again we want to clean this tank as mentioned in this video the same again....after some years... is this the same procedure apply to the car petrol tank also....
What is the process to recoat a tank that was coated years ago and needs new coating? There are some metal spots coming through the original tank coating
5:12 I'm sorry but I laugh so much 😂
this might be great because i have a tank with pin holes and a hairline crack. might seal it up.
What happens if you have some small puddles due to the sealer? And can you remove the puddles some how?
You should write in with a Sharpie “I’M” above the Special sticker. It would kill.
When will you take the TS185 on a test drive?
Did the sealer peel??? Or still good?
If you leave the acid in the tank for two days will it work better, or is that too long and could cause problems?
It won't flash rust when using the heat gun?
Where did you get the sealer from?
Hi, I was abot to clean the rust from my gas tank. So just poured a little muric acid inside, and smoke started coming out. Is that normal or I am doing something wrong. I poured some water before. And one night back I sparayed some wd40. Please let me know if the smoke is ok,or something wro ng.
Hello! I got a question. How to unstuck the gas cap? Mine is that one kind that flip(?) to open. Thanks for the video anyway...
@GoldGuyRides
5 жыл бұрын
Spray the whole gas cap mechanism with pb blaster! (A penatrating oil)
U can use apple cider vinegar or just white vinegar also,, right????? Instead of the acid??
*SPECIAL*
I am going to give this a go. This acid is not available in the U.K., its called Hydrochloride acid here. Can you tell me what concentration of acid is in Muriatic?
Thanks for the video, would the sealer mean i can store the tank without fuel and it wont rust on the inside?
@GoldGuyRides
4 жыл бұрын
Yes!
Looks thorough but extremely time consuming and it’s the only way ?
Where did you dispose of the chemicals and fuel
so you have to wait 4 days to dry?
Yo what is the mixture for the water and baking soda?
Specially
Hello. Hows your tank to date?
You sell the scrambler?
Can I use hydrochloric acid instead?
only thing after the baking soda rinse should be alcohol and drain that , let air dry for bit then the hair dryer or shop vac exhaust
SPECIAL ....
ive seen people on youtube say you should not let muratic acid in the tank for no more than 20 minutes and you let it sit over night ….which is right?
I just drained all of the gas out of my tank the other day and and noticed that the original sealer was chipping up. Is the muriatic acid strong enough to take all of the old sealer off?
@tristanhickenbottom4372
4 жыл бұрын
Cosmo Sparshatt I used acetone then muratic then paint thinner and that seemed to work best
Cool deal, what do you think about evaporust and did you ever use it?
@GoldGuyRides
5 жыл бұрын
I have used it, it takes a while to dissolve the rust but eventually the part will be very clean..In my case it took about 2 full days to dissolve all the rust.
@lynnh7694
5 жыл бұрын
@@GoldGuyRides Thanks for the response, I have purchased the Evaporust but, I have never used it before and was wondering how well it works. I just ordered the Por-15 tank sealer. I was just going to use the Evaporust and that was it. I'm glad I saw your video so I can complete the process.
Here is a comment for the algorithm overlords.