How To CLEAN an Engine Bay for $2.37..... AMAZING!!
Clean your engine in 15 minutes and with little money. We've made it even Cheaper and Faster to clean your engine compartment. Now your engine compartment can look brand new, just like it was off the showroom floor :)
Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bdf6a6ky
We Guarantee you will love it.
***********************************************
If you would like to help us out.
www.paypal.me/YourSweetProjec...
***********************************************
No air compressor needed, you can always wipe it down with some shop towels :)
How To Build a:
Superduppertelescooperhandydandy Air Nozzle
• Build a "Sweet Project...
1 CAN, will do up to 3 engine bays.
USA TOOLS:
You Can USE any of these
to clean and shine
amzn.to/40GrhuX
amzn.to/3HNJQov
amzn.to/2HTWnu5
OR
amzn.to/2Ib3IVa
or
Very Best Clean & Shine amzn.to/2QsqFI0
Multi-Purpose Towels amzn.to/2hK8QoD
To Keep it Looking Great amzn.to/2jCHktN
Venom Gloves amzn.to/2B8kLBh
_______________________________________________
UK Tools
Clean and Shine amzn.to/2KF7fu5
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. BEFORE ATTEMPTING OUR METHODS MAKE SURE YOU CHECK WITH YOUR MANUFACTURER. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this KZread channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
Пікірлер: 718
*****NO air compressor needed, you can always wipe it down with some shop towels***** :) If you are worried about your alternator see this kzread.info/dash/bejne/paKfmtqefcvMhdY.html Hello Everyone, Well we have bested ourselves by improving a method we thought was already awesome, we did it by lowering the cost even more in cleaning an engine compartment. One thing about Sweet Project Cars we never quit trying to improve ourselves and our methods for YOU!!!
@NazVick
5 жыл бұрын
Looks like Julio got it right! Nice result like this and for cheap is always a good thing! Thanks Mike.
@johnbeer5242
5 жыл бұрын
Sweet Project Cars thanks👏😀👍👍
@wba68
5 жыл бұрын
Just look at that Sweeeeeeeeeet Shine!!! 👍😎👍
@briancooper4767
5 жыл бұрын
Great result spc, keep up the great videos!
@SweetProjectCars
5 жыл бұрын
victor thank you so much for that :)
I've been using this very carefully on the plastic under the hood I'm glad to hear it's safe for the alternator in the whole motor thanks I learned so much from your Channel
I’ve got a relentless grinding job where completion of a project is measured in months and years and success is often subjective. Using your techniques on my cars and trucks has been therapeutic for me. Beautiful and unquestionable results in practically minutes. Thank you so much!
@SweetProjectCars
5 жыл бұрын
David thank you very much for your very kind comments my friend ...mike
@MrRustyB100
5 жыл бұрын
Best SPC comment of the day! ✔️
This channel is on my top 5 of preferences...every video is super helpful.. good job and please keep uploading videos ... I have to say that my favorite is the one where you show how to restore leather seats
This has definitely become my absolute favorite DIYer channel on youtube. Thank's, you guys! And by guys I mean you and the mouse in your pocket.
Definitely gonna give this a shot. Messed my spark plugs up once before using a degreaser and pressure washer. Water free way👍
Oh damn!!!!! It's been a little bit since I have been on here but I'm back!! You guys are still banging out great tips!!!!!!! Thank you for sharing as always, and Julio congrats on the promotion!!!!
Thank you so very much for giving your knowledge all around the world I watch your videos religiously and decided it was time to try this on my 1. 2001 Honda Civic, 2. My 2003 Dodge pickup, 3. 2007 Chevy Colorado all engines are in perfect working condition so with that said I also did the headlights on all 3 with your guidance all by hand and it came out SWEEEEET! I have decided to start my own business thanks to you. Thank you again.... I never reply to you tube but you definitely deserve the praises of all your you tube fans. Can’t wait to learn more Your fan for ever.
@SweetProjectCars
5 жыл бұрын
Bart Mendez good to hear that and we wish you tons of success it is a great trade for sure :)
Just when I thought this couldn't be improved you made it cheaper to do without compromising the end result !!!!!👍👍 thanks again....
@SweetProjectCars
5 жыл бұрын
kcdaniels58 thank you very much our good friend and subscriber :)
Great job Julio is right this is an awesome tip going to have to try this myself I spend way too much time under the hood to keep it clean once every four car washes
@SweetProjectCars
5 жыл бұрын
703 CRUIZ'N you will love the results my friend :)
I did this today on my 2003 GMC Sierra and it worked great! Thanks so much for this. I didn’t have an air compressor so I just used old rags I had laying around. It did take the whole can but works as advertised. I think it may work even better if the engine is slightly warm, not hot just warm. Thanks much!
@SweetProjectCars
5 жыл бұрын
Scott Newton god deal my friend we are glad it worked for you and you are correct a slightly warm motor works very good thanks for sharing :) mike
This is the best car channel in youtube. There are many good ones, but this one is the best because it shows you how to do things on a budget and the right way. Kudos to you Sweetprojectcars.
@SweetProjectCars
5 жыл бұрын
tree fiddy We try really hard to try and save good people money with limited products
This is great. Way better than any KZread video that involves multiple chemicals, tools, pressure washers.
@SweetProjectCars
4 жыл бұрын
Thank you very much glad we could be of help have a great night mad Mike sweet project cars
I used this method to clean the engine on both my truck and car. This is easy and it makes it look brand new again without any problems to the electrical system. Thanks.
@SweetProjectCars
Жыл бұрын
Great job! Thank you for watching and sharing your results, hope you have a fantastic weekend. mad Mike the hammer SPC
I used the Meguiar's Tire Foam and it really worked well. Thanks for the video, this was very helpful. I sprayed it on, waited 5 minutes and blew on it with the air hose. Wiped with a cloth any areas that were still a little grimey, and then repeated the process one more time. I am very happy with the results, and would not have thought of this.....Thank You !
@SweetProjectCars
4 жыл бұрын
Most cleaning type tire foams do a great job in this process thank you for sharing have a great day Mike Sweet project cars
It’s like you guys are reading my mind and then post a video! I just washed, cleaned, and 9H coated the Honda plastic engine cover on my 2006 Ridgeline and was just figuring out how I was gonna clean the engine bay without using hi-pressure hose. Not ashamed to say it, I have a SERIOUS man-crush on you guys @Sweet Project Cars! Or as I’ve learned, I “ship” you guys hard. 🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
@SweetProjectCars
5 жыл бұрын
Sounds like you’re all set my friend glad we could help
I'm gonna have to try this on my CUSHMAN, & lawn tractors.
As I mentioned in the first video you did with this cleaning method, Outstanding job! Always a Sweet Looking Ride with cheap and affordable ways to detail /maintain your vehicles! Keep up the great work gents!
@SweetProjectCars
5 жыл бұрын
Halsey Marcoux always great to see you my friend and loyal sub !!! mike
@halseyballistic
5 жыл бұрын
@@SweetProjectCars always great to know that my loyalty is appreciated here with the Sweet Project Cars Crew! Keep on rockin Mr Mike!
@SweetProjectCars
5 жыл бұрын
Halsey you got it my friend :)
Here in South africa we use Rally No Hands also white foam spray also spray everything use complete can then close the hood next morning open the hood and whipe to a buff looks brand new.
Great job as usual Julio Caesar Chavez comes through!! Lol Merry Christmas
Wow!! Amazing is right! Thanks for sharing. 👍✌️
*Spotting that bare loom harness behind the alternator- probably saved the Customer from a future untimely breakdown. Awesome spit shine job, Julio!*
@SweetProjectCars
5 жыл бұрын
Yeah we fixed it up for them no charge that’s the great thing about working on your own vehicle you get the find things like that could be a serious problem down the road
Really nice,I believe I would hit with the hose first ,but still it does an incredible job !
Usually these kind of cleanings in my experience only last for a day or two. Once the shining agents in the spray wear off usually you'll see that there is still a layer of dirt on most of the components. I think using a brush to agitate the dirt off of the surface while using a cleaner works best.
@SweetProjectCars
5 жыл бұрын
Heathclor no need to do any of that my friend just spray this on and wipe it off and you are good to go and you will have no side effects with dust or anything else
Been using that method for years. Tire foam will also keep those black and grey plastic parts such as bumper trim, cowling etc. looking new without the messy silicone look.
@SweetProjectCars
5 жыл бұрын
Clarkecars you got it my friend :)
I've used NO TOUCH tire care before & it works!! Even on the dirty paint on the passenger side fender, just wipe the painted potion with a rag before it dries. Heck might be the same stuff just branded differently.
@SweetProjectCars
5 жыл бұрын
forgotmylogininfo you can use what you like of course we are just sharing what has worked for us each and every time..
I wiped my engine bay down first then hit it with the turtle wax tire foam not to much but hit it in areas I needed. Let it sit and came back wiped it all down just to recap on the spots.. Looks nice!
@SweetProjectCars
5 жыл бұрын
IBF good deal glad to hear that :)
Hey thanks for sending me those two videos I'm going to do my burn hole thanks and keep up the great work
@SweetProjectCars
5 жыл бұрын
bruce worman you are very welcome my friend :) mike
Glad i came across this video. Doing this tomorrow. Julio was right.
This works! I just tried it. I was amazed at how well it does.
@SweetProjectCars
2 жыл бұрын
Awesome, Robert! Thank you for watching and sharing your fantastic results, we really appreciate it, have a great day my friend. mad Mike the hammer SPC
Looks good 👍, i think ide rather do this than spray it with pressure washer at car wash
OK, FINALLY got around to this project this afternoon - used the Meguiar's Hot Shine Tire Foam - and MAN, did it ever work really well! My engine looks almost new. Had to get inventive with the powered-air step - got my very powerful backpack blower and used a stepladder to get just above the engine - worked awesome! GREAT, tip. What I liked most (besides the result) is that it's so easy. LOL, I shudder to think I've used a pressure washer in the past.
@SweetProjectCars
3 жыл бұрын
Nice!! Way to adapt and overcome, excellent job! Thank you so much for watching and sharing your process, we really appreciate it. Hope you have a fantastic day my friend. mad Mike the hammer SPC
You are amazing. Thank you for sharing your techniques. Signed, The Old Man
@SweetProjectCars
5 жыл бұрын
Old man thank you very much my friend we appreciate that have a fantastic day
Just found your channel. Love it! And they are awesome to say the least. Great job
@SweetProjectCars
3 жыл бұрын
Welcome aboard! Glad to have you with us Greg. Thank you for watching and commenting, have a fantastic day. mad Mike the hammer SPC
Wow looks great! Will definitely try this after a little more research.
@SweetProjectCars
5 жыл бұрын
We have been doing it for close to 15 years on over 2 thousand or more of our customers vehicles with Neverr and issue have a great day
I was all revved up for this one , what a job
@SweetProjectCars
5 жыл бұрын
Martin we appreciate that my friend have a fantastic night
Doing that in reverse is a good way to fill the can back .LOL
I purposely didn't skip the ad so this great channel can get paid 👍🏼
@SweetProjectCars
5 жыл бұрын
Thank you Ray fire we appreciate that
Tire shine spray works great on the frame and wheel wells
@SweetProjectCars
5 жыл бұрын
Joshua Neal it sure does thanks for sharing your tip my friend
Nice Job !!! Definitely going to give this a try.. 👍👍👍
@SweetProjectCars
5 жыл бұрын
Reaper Ronin you will love the results my friend :)
Love your videos you are the wizard of oz of cars I have done 4customers cars of mine this way and Made a pretty penny to thank you my wizard
@SweetProjectCars
5 жыл бұрын
Thank you Tony we truly appreciate that our new Sweet project cars charter member
Very nice tip Mike. Thanks and keep up going!
@SweetProjectCars
5 жыл бұрын
Thank you very much Mr. Nico we truly appreciate that if you could do a small favor and share our channel and Videos that would really help us out
I use greased lightning cleaner from dollar general its $1 and then dollar store tire shine. Looks great and the engine bay is decreased. Ill definatly try your method and compare.
@SweetProjectCars
5 жыл бұрын
Thank you very much for sharing you will love the results of this
Thumbs up! Thanks for all your videos. Love them!
@SweetProjectCars
5 жыл бұрын
thank you thank you we appreciate that and if you could do us a favor and share our videos and channel that would be great
Simple green works pretty good also, along with Bleche White tire cleaner. It doesn't add any shine though...
@ohboy3622
5 жыл бұрын
Make sure you get the simple green safe for aluminum. The original will etch aluminum
Pretty amazing......imaging that!!! Time to give Julio a raise. ;-)
@SweetProjectCars
5 жыл бұрын
Leonardokite ya that was the tough part lol
@papahoe6718
5 жыл бұрын
@@SweetProjectCars Ya,,,mo money for julio
Works great I've been using foam tire cleaner on my engines for years no problems. Also works good on exposed frame rails on truck and fender wells.
@pg1171
5 жыл бұрын
Yes it does. I've done that also! Works great!
Excelent job Julio!!!!
Thats funny, sitting here watchen your video and at the end a quote, "wheres the franks hot sauce" I have some right in front of me hahaha
Looks nice, I personally like getting under the hood and degrease and hand wash every nook and cranny. Not big on the slick shine effect, love that fresh, new, “you can literally eat out of your engine bay” look. Been using the armor all and air hose method for a while now however. Helps out on those dried out shabby interiors too and hard to reach areas.
@SweetProjectCars
5 жыл бұрын
Well Noah I can tell you this you are a very rare person who likes to keep their Engine bay that clean other than us here some people subscribe to this channel and do not even enjoy working on their car I don’t quite understand that AnyWho glad to hear your fanatic like us have a great day Mike
@noaht5191
5 жыл бұрын
Sweet Project Cars it’s a lot easier to keep one that clean living in the south, especially in the winter months.....those techniques and using your seat repair techniques have helped me make my 2000 Z71 look brand new inside again.
@SweetProjectCars
5 жыл бұрын
Noah you’re one of the good ones that’s for sure wish we had many more just like you that share our affinity for keeping their vehicles looking great
@noaht5191
5 жыл бұрын
Sweet Project Cars Thanks. Your channel has already been highly recommended to some friends in the used car business. They really appreciate your content too. It’s amazing how many people don’t actually know how to properly clean and repair simple things on a vehicle. Keep up the good work!
Thank you for sharing I have a 1988 bronco and I was looking for a effective way to do it and not hurt the old electronics and hoses when I clean it in the spring I am sure the engine bay has never been cleaned in 20 years
@SweetProjectCars
5 жыл бұрын
Itz_not_ brennan you will love this and it is safe for everything and no bad fumes it may take a couple times to get a real dirty engine bay clean.
@itz_not_brennan8088
5 жыл бұрын
@@SweetProjectCars thank you I can't wait to try it
Nice method, gorgeous engine and thumbs up for Who-Lee-Oh!
@SweetProjectCars
5 жыл бұрын
Thank you very much we truly appreciate that Gracias
Another great, simple and affordable way to get the job done! I have a question about keeping mice out for winter storage. I know a clean engine is where to start, but what is the best way to go about keeping out pesky rodents and other things to do to get your car ready for storage months? Thanks so much!
@SweetProjectCars
3 жыл бұрын
Funny you ask.... we are working on a video pertaining to just that! We will have it out in a couple weeks. Thanks Billy! Have a great afternoon, keep your eyes out for the vid. mad Mike the hammer SPC
@zoezzzarko1117
3 жыл бұрын
@@SweetProjectCars Did you put up the mice video yet? 😲
@Zincink
Жыл бұрын
mouse traps? I put peppermint oil on cotton balls around my dad’s car. It smells like a dentist office haha 😆
Do you have a video on how you made your xtended spray nozzle? Thanks in advance. Another great vid by the way. I just did my sons jeep headlights with mothers aluminum polish, man easy peasy :)
@SweetProjectCars
5 жыл бұрын
Neil if you look in the show more of the video description you’ll find all the tools in related videos even for the handy-dandy air nozzles and good to hear that your jeeps headlights turned out awesome
Idk... I think my kids are even bigger animals. I prefer the name gremlins 🤪
Another greeting video thanks Mike but I do have a question do you have a video on how to fix a cigarette burn hole in a cloth car seat
@SweetProjectCars
5 жыл бұрын
bruce worman this video will work for cig burns kzread.info/dash/bejne/qn-Vx7eAhqfgebg.html or this one kzread.info/dash/bejne/iZWW1ryEe8Wbp8o.html
WOW,, I will keep watching, just keep posting videos. Thanks again for ANOTHER GREAT VIEDO,TIP..>>!!
@SweetProjectCars
5 жыл бұрын
Thank you Rod we will do that my friend if you could do us a favor and share our videos in our channel that would be great
Auto enthusiast & racer who loves your channel, thank you very much. Next, Think I missed something on how its $ 2.37. I use the expensive cans of tire shine like in your details section, did you make some of your own cheap ?
@SweetProjectCars
2 жыл бұрын
LOL, that's called inflation Blake :( Crazy huh! Thank you for watching and sharing, have a great day my friend. mad Mike the hammer SPC
just wondering how it cleaned up those usually oily valve covers. I use super clean de-greaser from walmart. Soak it then wash off then i apply dressing and only a thin coat so it doesnt attrack more dirt.
@SweetProjectCars
5 жыл бұрын
TheCamaro5 it cleans everything spotless in minutes and safely.
Got a 3.8 Cutlass and was always concerned with washing the engine bay because I didn't want it to short out my wires and spark plugs etc I was gonna take it to a spray place and power spray it first but was wondering if I need to cover anything with a bag or just leave it running spray as I go?
@SweetProjectCars
5 жыл бұрын
Wyatt Powell we do it just like you see in the video we do advise against power washing with water. Always check with your manufacturer before doing any of our videos...
Good job going to put it on my to do list..thanx
@SweetProjectCars
5 жыл бұрын
Nas Khan thank you and we are glad to help keep you busy my friend lol
This product and the next best one is way too expensive to order here in Northern Ireland. I know this may not be as good but would it do? Gunk Engine Degreaser spray foam. It's an old diesel, 26 years old although I guess that's not important. Should I cover the alternator? Thanks guys.
@michaelanthony508
5 жыл бұрын
what does it cost to ship from the usa to you?
I used Armor All Tire Foam on a Buick and it came out beautifully. It took all of 1 can. Two cans would have been better. It was great to clean around the under hood sound deadening material under the hood. I’d never been able to clean that. Would I be able to use method this on a Prius engine? Thanks. Love your videos!
@SweetProjectCars
3 жыл бұрын
That's awesome, thanks for sharing. Take a look at this video if you are wondering about the prius kzread.info/dash/bejne/paKfmtqefcvMhdY.html Thanks for your question. Have a great day. mad Mike the hammer SPC
@VeganRod
3 жыл бұрын
@@SweetProjectCars thank you. I’ll be cleaning the Prius tomorrow.
Good job Julio 👍
Wooooooow!! That's not only CLEAN it's SWEEEET&FOAMY!! Really,, that is a cool way to clean up the engine bay!!😉 Alot easier then the ol' pressure washer!! It just blew my mind 🤯 way ta go SPC 👍
@SweetProjectCars
5 жыл бұрын
Thank you Ed it is very simple to do that’s for sure thank you for sharing with us have a great day
i have a 2019 toyota vios with a cvt transmission.. is it safe and ok to use any tire foam to clean the engine bay? im very afraid to do it. please help - im from the 🇵🇭
I want to thank u . I will try this on my jeep
@SweetProjectCars
5 жыл бұрын
Sandra Mccoy you will love the results my friend :)
Congrats Julio! 😄
@SweetProjectCars
5 жыл бұрын
hafeexius he did good on this for sure :)
Beautiful. I think you had a similar video before and you use ARMOR ALL TIRE FOAM?
@SweetProjectCars
5 жыл бұрын
Edwin Coolet we do have that other video as mentioned in this video we were just showing an even cheaper way to do it my friend.
Looks good, thanks for the tip. 👍
@SweetProjectCars
5 жыл бұрын
Thank you very much my friend we truly appreciate that
Foaming cleaners always seem to penetrate better than average liquid all purpose cleaners.i use aerosol foamy upholstery cleaner and a detail brush on Chrysler product interior plastic trim vs the all purpose and a detail brush due to the deep texture in Chrysler plastic trim.that penetrating action looks like it works great on the engine compartment.I’ll definetly give that a whirl. Great video as always mike. Please keep them coming
@SweetProjectCars
5 жыл бұрын
Hey George we appreciate that very much and you are exactly correct the farming cleaners do penetrate much better
That Julio is one smart amigo.
@SweetProjectCars
5 жыл бұрын
Bruce he is a legend in his own mind as we always say to him course were all picking on each other around here all the time anyhow
So what would you advise to dissolve the bugs and grime that get stuck in the radiator without dissolving the aluminum in the radiator?
@SweetProjectCars
5 жыл бұрын
We use super clean straight undiluted sprayed on let it set take a power washer and they come right off
This worked great for me. Thanks
@SweetProjectCars
5 жыл бұрын
Good Deal glad we could help
So the foam based tire cleaner is also safe for engine bay inside the hood?
so, it;s $2.49 or $2.37?!......lol Nice video, as always. Straight to the point and cut the BS.
@SweetProjectCars
5 жыл бұрын
GD Kaci well if you pay tax it can be either way ty mike
I use oven cleaner from dollor store works good and also get some purple power that's all what I use a pressure washer or just using regular water hose too but I always cover up the alternator to keep it from getting wet from water or anything and if the vehicle has a computer underneath the hood that's visible that could get soaked also cover that up as well . And then use compressed air after all of that and its clean . but I will never ever use shine stuff on my engine or anybody else's all that does is make a mess and make it worse and collect dust and dirt everywhere
@SweetProjectCars
5 жыл бұрын
CD'S Automotive & Repair none of that is needed here, just spray this on and blow or wipe it off done, with no chance of damage to outlying body paint or bad fumes.
@sbains560
5 жыл бұрын
Oven cleaner is to caustic
New way to try to clean up the mud toy!
Congratulations Julio ! "ABOUT TIME" you get the proper recognition of your hard work. I been using Turtle wax brand dressing after friend says good stuff last few years. Growing up in the 80s it was uncool use Turtle wax brand for some reason with my Detialing friends.
@SweetProjectCars
5 жыл бұрын
Kyle growing up in the 80s as well I’m with you on that I don’t know what the deal was why it was so uncool
@kylemlm
5 жыл бұрын
@@SweetProjectCars No clue..I think we thought it was cheap. My Dad & his friends use Dupont 7..We started Car cleaner wax by Maguire's ..then went to #7 Maguies mix with #3...SOS pad and Mothers polish on the aluminum and stainless steel...Buff the exhaust and gas tanks on Buick GN. LOL
Thanks a ton, guys.
i have a question, i really like your homemade tire,vinyl, leather, and rubber protector, why couldn't you use it the same way you used the McGuire's tire spray you used to detail the engine compartment.
@SweetProjectCars
3 жыл бұрын
Great point! you could as long has it has a cleaner in it
Great job 👍
Is there a lingering odor from the cleaner afterward or does it dissipate in a few days? Thanks...
@SweetProjectCars
5 жыл бұрын
lavapix no ill effects of this method in any way :)
Julio does not exist. You are pulling our chain
@SweetProjectCars
5 жыл бұрын
Nenad Stanojevic OH MY FRIEND...he is all too real...sometimes he just likes to pick on everyone here as he is a real jokester and some wish I'm sure he did not exist LOL
@iamelvisman68
5 жыл бұрын
Julio exists in all of our hearts
@SweetProjectCars
5 жыл бұрын
He sure does he sure does
@SweetProjectCars
5 жыл бұрын
Hello he is way to shy for that I can tell you that much ...
@DSFiveO
5 жыл бұрын
@@SweetProjectCars 🤔🤔 i think julio is maybe just youur other personality
It's like having the remote in your hand, it takes little effort, press the button and relax. I'll try it on my work cloths on the carpet and get two jobs done in no time:) Thanks Brother great tips. Don't use shaving cream:)?
@SweetProjectCars
5 жыл бұрын
That’s exactly what it’s like my friend very simple
After applying the tire foam twice, can I spray it off with water instead of wiping it with rags? It seems to me that there are some spots that rags will not reach.
@SweetProjectCars
5 жыл бұрын
J. Wilson you can spray it off with whatever you like my friend we are just showing you the way we do it so it does not cause any issues thanks mike
can you use this in the air filter box?
🍬🍬Sweeeeeeeeet sweeet sweeet channel🍬🍬 Everytime I see the bell rings from your channel i'm like 💪💪
@SweetProjectCars
5 жыл бұрын
Thank You very much my friend we appreciate that and if you can do us a favor by sharing our channel and videos we would truly appreciate that as well thanks Mike
Nice! This is good! I will try it! Did you clean the top hood?
@SweetProjectCars
5 жыл бұрын
We clean everything under the hood with this method my friend you will love the results
I did not see the name of this product link unless the is tire foam cleaner. Thanks!
@SweetProjectCars
5 жыл бұрын
Ron L you are correct
brilliant video,excellent result..
@SweetProjectCars
5 жыл бұрын
MINIMOTOMADNESS thank you very much our good friend and subscriber :)
Awesome video, I have a question car that I need to do this too is a Kia and it’s Ecu sets in engine compartment behind battery do you think it’s safe to spray it too?
@SweetProjectCars
5 жыл бұрын
Mike Ross everything on a motor is safe to use this on other than items under covers of course. if it's covered by a factory cover its fair game for cleaning it this method :)
@mikeross58
5 жыл бұрын
Sweet Project Cars thank you
Here is what I don’t understand...... I get everyone has an opinion but what I do not get is the “Thumbs Downs” Even if the product doesn’t work or you disagree I don’t see anyone of those people taking the time to try to help other like Mike and SPC ! I’m not saying this to blow smoke up Mikes A$$ but and I speak for most of us. THANK YOU!!! Thank you for taking the the time to educate us DIY’rs
@SweetProjectCars
5 жыл бұрын
Big Mike thank you for this ,. After being on KZread as long as we have and understanding the niche that we are in there are many many other car channels that are not doing very well we usually get pretty much the same amount of thumbs down on most of our videos this comes from those out there trying to get a leg up on KZread with their channels doing car repair and the like. There’s nothing we can do about that it’s much like the Internet most of the reviews done on companies are not real especially if they’re bad reviews companies pay people to go out and give bad reviews to their competition. I wish this did not happen but it is the way it is. Also I’m going to send you a comment that I just received and the link to the video you can read the comment and my reply back to them, it proves that most people do not watch the entire video and listen to what is being said and done, then they take bits and pieces of it they may watch one minute of a five-minute video and then say that it is bad or incomplete and then give it a thumbs down where if they were to watch the entire video they would understand how things are being done. Knowledge is power and Many are lacking in their attention span.
@SweetProjectCars
5 жыл бұрын
kzread.info/dash/bejne/a3uu0ducece-Yto.html the video and the comment just received and my reply back Comment : C List 22 minutes ago Looks like you just highlighted the scratch. I dont know where you think it disappeared to. My Reply: Sweet Project Cars 17 seconds ago C List I have to ask you a question, did you watch the entire video and listen to everything that was being said? Because your comment was heavily answered in the video. Thank you very much have a great day
@mikeb6418
5 жыл бұрын
Unbelievable I’ve seen this video like I’ve seen all your others. What a Dumb S#%t. Mike please keep doing what your doing. We appreciate it brother
@SweetProjectCars
5 жыл бұрын
Mike most quit on youtube because of the sheer tenacity it takes to deal with all the %$#%$^ you know what I mean...but we have been through much worse in our lives so we are very very tough skinned to let some try to drive us out...plus I'm Irish and that gives me the tenacity needed sometimes LOL
@rayjones3212
5 жыл бұрын
I've heard that the "Thumbs Down" that you see on many of the videos are directly related to the number of "bots" that visit these pages. "Bots" being short for "Robots" or software that is part of the search engines that constantly search the internet to keep their cached file / website address locations up to date. So in case you didn't know, there are many search engines which are part of the internet - not just Google. I just thought I would mention this here.
another great one
would this method work to clean 2-stroke trimmers and leaf blowers? Possibly lawnmower engines? Just a lot of extra oil and junk on them.
@SweetProjectCars
5 жыл бұрын
Larsen & Larsen Auction Company we use this first on those amzn.to/2JPbmqQ then use the video in question
Great videos, sir! I like your channel because you get right to the point, no long winded explanation about what your going to do, what you’re doing and what you did. Keep it up!
@SweetProjectCars
5 жыл бұрын
rwl6935 thank you very much my friend :)
@kris856
5 жыл бұрын
@@SweetProjectCars Exactly. This is the reason also in my case why I love your channel so much. Keep up good work, please.
@SweetProjectCars
5 жыл бұрын
Herr thank you so much that means a whole lot to us more than you’ll ever know have a great night thanks Mike
Not a problem if you don’t have an air hose/air nozzle to blow off the residual I assume?
@SweetProjectCars
5 жыл бұрын
Allan Johnson no air compressor needed, you can always wipe it down with some shop towels :)
Nice ima try that
Is this only for plastics? I bought a Pontiac Grand Prix GTP, thing sat there for a while and collected a lot of dust and grime. Would this be okay to put on a supercharger? The engine?
@SweetProjectCars
5 жыл бұрын
this will work on all the engine compartment no matter what the material
Good job julioooooo👍