Did it. Cleaned it. Fixed it. Thank you. Perfect. I've paid 4x for the dealer to pick up my bike and fix it. I did it in 30 minutes myself this time. Thanks again!

Because of my health, it's been a long time that I did not do motorcycle mechanics so i thanks you for the refresh. You guys are good!

Great....need to know how to take it out of the bike too.............half as helpful as I needed.

this is way better than the last "how to clean scooter carburetor" video I watched. he just sprayed some carb cleaner in the bowl, and said if the jets are clogged, buy a new carburetor 😐

Just recently acquired a Lifan 50cc that has been sitting for some time. I have good spark and compression. It also runs with a little starter fluid. This video was just what I was looking for on cleaning out the carb. Thanks a ton!

@JoyceMcCombsPhotography

7 жыл бұрын

Congrats on your new 50cc purchase. We are happy you found this video helpful. Please let us know if there are any other topics you would like to see from Wild Hogs Scooters.

This video is extremely underrated

Very nice and easy to follow video. I'll be sure to stop by your shop to purchase something now that you save me a little money on carb cleaning. Thanks

Great teacher I like the way you explain it’s helping me a lot thanks

Great detailed how to video JJ! I got mine out and cleaned with no problem thanks to you. You rock!

Thank you for the demo.

Short sweet and simple 👍

Great video!!!!!

My favorite videos are the ones where they say “we already did this step”, also when the people making the video assume you know how to remove a carburetor (in this case)- do I clamp the hoses that I disconnect from the carb? Do the hoses have a certain order? Do the carburetor jets have to screw back in to the exact location? Do I clean the whole carb with brake cleaner? This video will never be played in a garage near trained mechanics- know your audience people!!

Best video on 50cc carbs

@JoyceMcCombsPhotography

7 жыл бұрын

Thank you Felicitous Fox! If there are any other scooter subjects you'd like us to cover please let us know.

Thanks man .

Thank yo for the tips

Thank you

Hi thks four your excellent video I have a Piaggio Zip 2T every time when I start the scooter I need to warm up first before I drive is normal thank

I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.thks four your video

Really hope this will help

What kind of air filter would work best for the carb?

the acceleratir pump is missing the rubber i think it’s safe just what do you think

I have a tao tao 50cc 4 stroke brand new. First time running it engine bogs down on acceleration and stalls at full throttle. Bought it from Texas and live in Michigan. Hope it a simple fix.

I believe my problem is the carb float bowl...? When I give it throttle, I get pulses of power and lagging. But as cruising speeds and smoother throttle it's fine. But also, when I'm driving along if I go full throttle and pull it all the way back... I start slowing down and lose power. I have no idea why, but it acts as though I just let off the throttle completely. Maybe it has to do with my very long throttle, or the same dirty carb issue. The guy before me drive it with a broken air cleaner housing, but I got the replacement, so my carb should stay clean now. Other than those two odd things, my 2002 Honda Metropolitan is amazing. I love it and I'm currently customizing it.

@calebprod

5 жыл бұрын

I have the same problem. How to fix?

@DanteYewToob

5 жыл бұрын

@@calebprod I just guessed it was a dirty float bowl, and i guess I was right because it runs great now. I used B-12 carb cleaner fuel additive, it's pretty cheap and available at Walmart or anywhere. I followed the instructions and added a tiny bit extra to a full tank and just rode hard and fast for about an hour and it worked great. On my next fill up I used seafoam to keep it clean and improve performance and it has run like new since. All the throttle issues are gone. I plan to run seafoam or another stabilizer and cleaner every other tank or so to keep it nice and clean, and I'll do a small amount of B-12 once a year or so for maintenance. Good luck, I hope it works out for you.

so i have a new carb for 50cc.gas flows into it fine, but when i open the throttle it doesnt come out, any tips?

how and to what value the operating clay level regulator should be set

My Chinese 50cc scooter starts and idles just fine but any revs above idle the engine dies, I hope it's just the carb main jet that needs cleaning.!

What to do if accelerator pump stuck?

Big problem, the screws to remove the bottom case have been fixed so there is no entry !!! Know where I can order one ?

Had my scooter for almost two years gonna do this weekend but just replace the drive belt now it stalling everytime I stopped but start rite back up and the kickstart is getting stuck downward

the acceleration rod is missing the rubber… does it matter?

Doesn't it have a fuel line connected to it that would also have to be disconnected to remove it?

Is the proper term for a 49/50 cc scooter a Piglet instead of a Hog?

Hi there, great tutorial..... can you tell me more about the componants on the float bowl, I think it's called a 'valve check ' or something similar. I removed the 2 screws from the plate and exposed a rubber flange & spring etc etc, off to one side was a tiny brass screw that I removed along with a tiny spring underneath it.... is there meant to be a tiny ball bearing under that spring located in the housing as I found one on my work cloth after stripping this area ???? So on reassembly it would be ball bearing - tiny spring - brass screw ???? Any advice from anyone on this ball bearing and it's correct location would great... thanks bud

@MegaRusty64

6 жыл бұрын

You call it the 'accelerator pump', the tiny brass screw right next to it ??

@JoyceMcCombsPhotography

6 жыл бұрын

Sorry for the delay. Wild Hogs Scooters loves their customers and is always happy to help anyone with scooter questions. You can contact them directly thru their website www.wildhogsscooter.com. They have 5 locations in Florida to choose from.

Hi JJ, we are having problems with our scooter. Can you please help.

My 50cc scooter is stinking with fumes when in idle mode.is it possible to fix that...

The smaller jet you removed, you have the holes at the bottom. Do you or can you rin a wire through the length of the jet. Top to bottom?

@JoyceMcCombsPhotography

6 жыл бұрын

Sorry for the response delay. Wild Hogs Scooters loves their customers and is always happy to help anyone with scooter questions. You can contact them directly thru their website www.wildhogsscooter.com. They have 5 locations in Florida to choose from.

The needle was stuck and we broke the wires..what do we do now??

I have a taotao 50, it was left sitting for about two years, recently decided to start it. Well realized I had to clean out the carburetor, the toughest part was cleaning out the jets. I saw another video, some guy used the thin metal wire inside a twist tie. So, I rummaged through my miscellaneous drawer with many twist ties, found a couple, (here's a helpful trick, use a lighter to burn off the plastic or metal surrounding the wire in the twist tie makes it super easy) Ok, I was able to remove the Big jet and stick the thin metal through, cleaning it out. The problem was with the small jet, the thin metal wouldn't fit, I looked and looked for a metal thin enough, eventually I found a thin enough piece of metal to fit. The scooter runs, oh.....make sure to drain the old gas, it will cause the scooter not to run well.

@johng.3740

2 жыл бұрын

There is one more thing, after cleaning the carburetor the scooter wouldn't start unless I gave it much gas, I finally figured out that the vacuum fuel regulator (fuel petcock) was the problem. At first I thought it was the valve lash adjustment, but it wasn't, I ended up putting in a big bore kit, still same problem...the scooter was left sitting for about 2 years, the old gasoline degraded and possibly hardened the vacuum regulator mechanism. I replaced it and it starts and runs great.

Trying to wire the scooter up with your electrical wires to the motor

I just picked up a pitbull 50cc bike, it dies if its at idle for more than 1 minute and bogs down when i try to accelerate rapidly, as long as im at half throttle or less it runs fine. Could that be cause by the carburetor?

@A_SVentures

5 жыл бұрын

Your running rich, try going down a few sizes on your main jet

Hi man. Is it carburetor issues if my 50cc 2 stroke scooter can't maintain its idle after i turn it on every morning or when parked a couple of hours? It starts but will just die down and i end up putting it on slight rev for about 5 mins before it can maintain its idle. It's a 2017 scooter with only 1400km on it. Appreciate any help. Cheers

@OliverGottberg

5 жыл бұрын

Nino Echavez Im not an expert at all but when my scooter had been in the garage over the winter i had similar issues so i think it’s worth giving it a shot

Is there any big differences between a 2 stroke carb and a 4 stroke?

@johnyersdel3067

2 жыл бұрын

Not really

This is for 4t

I have a 2013 bashan vip Chinese scooter. it won't start and it leaking gas from the side lube. need help.

@JoyceMcCombsPhotography

6 жыл бұрын

Sorry for the delay. Wild Hogs Scooters loves their customers and is always happy to help anyone with scooter questions. You can contact them directly thru their website www.wildhogsscooter.com. They have 5 locations in Florida to choose from.

Hey there, I just wanted to let you know I watched your video (repeatedly - since I had never done anything like that before), but I got the job done and it runs great. However, I have another issue, I had a guy to come down and change out my plug - he added more gas, and somehow he got the cap on cock-eyed, now I cant' get it open to put gas in. What should I do?

@JoyceMcCombsPhotography

6 жыл бұрын

Sorry for the delay. Wild Hogs Scooters loves their customers and is always happy to help anyone with scooter questions. You can contact them directly thru their website www.wildhogsscooter.com. They have 5 locations in Florida to choose from.

Mine doesnt have screws to take bowl off looks like rivets.

Hi, man macht alle Düsen raus, dann das Gehäuse mit Pressluft durchblasen, wenn vorhanden ein Ultraschallbad durchführen Was Du hier gezeigt hast ist leider zu wenig. Vor allem wenn der Vergaser lange nicht in Betrieb gewesen ist.

What do you do with the gasoline you drain from the carburetor? I want to try to clean my scooter,but what to do with the gas?

@jonesjones7057

2 жыл бұрын

I know its been awhile but in case you haven't worked on your scooter yet, its a small amount of gas. If you put it in a container uncovered it'll evaporate in a day unless its really cold outside.

@Khloe_dancer_model

2 жыл бұрын

@@jonesjones7057 I haven’t touched my scooter.So it evaporated?

What is the fee for a carb cleaning?

@coltrushton219

3 жыл бұрын

Do it yourself

Nice subbed =) where are u from btw?

@JoyceMcCombsPhotography

5 жыл бұрын

Xenon TO Winter Park Florida

I just use pressurized air

What the video don't show is how to disconnect the stupid throttle cable part thats where im stuck and my carb don't have 3 screws in the bottom only 2

Bro you need some closeup shots of what youre doing...

For some reason it says your channels called Joyce McCoombs photography😂😂

@JoyceMcCombsPhotography

4 жыл бұрын

Sean Docherty yes, I’m the photographer who created these videos. I hope they have been helpful to you.

I “checked” My ac pump and got squirted in the chest with gasoline😂

at 1:40 the guy in the background disappears

@JoyceMcCombsPhotography

6 жыл бұрын

LOL He sat down in a chair behind the guy talking. You can see a dog go over to him at 1:53 because he is eating his lunch. Great eye @CrazyCroatianCA. Thanks for watching so intently. Glad you enjoyed the video.

How about if the screw won’t come out

@87jenno

3 жыл бұрын

Mines are too tight .

Evo

Why he smiling lol

I'm @ 0.31 seconds this is a waste of time without knowing how to remove it

Thank you

Bro you need some closeup shots of what youre doing...