I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.thks four your video
@MrBerenguer67Күн бұрын
Thks four your excellent video I have a Vespa Lx 50 my carburetor drope a little petrol from the bolw if I remove the carburetor to change the tray is not out of tune
@KennyEickelberg-kk3tv5 күн бұрын
Is the proper term for a 49/50 cc scooter a Piglet instead of a Hog?
@ThomasRose-po6lz23 күн бұрын
On a 50cc motor how do you prime the motor
@baaaakАй бұрын
Fucking dickhead it doesn’t work for me
@PatHaskell2 ай бұрын
I missed where the fuel and vacuum lines attach.
@therealcomediancandylady793 ай бұрын
You lost me at the throttle cable. Who said the camera person did a great job. 😮
@therealcomediancandylady793 ай бұрын
Jezzzz ...... your hand was in the way, for the throttle cable.😢
@wxmber48223 ай бұрын
6 year old video but still helped me fix my piaggio zip 4 stroke, nice instructions and easy to work on though i needed to readjust my air/fuel mixture again which was a little problem, but I got it to work :)
@luanaesposito14824 ай бұрын
Where did you buy the carburetor from
@robertmotion5 ай бұрын
this is great information. and great tutorial. /Bklyn👑
@ShafaqIftikhar-pw9ld5 ай бұрын
Great video!!!!!
@JoshuaYanez-hh8hc7 ай бұрын
Hello, I have a 50 cc Jinlun. Similar to this, but it had a sheetrock screw instead of the idle screw. I took it off. It dosent die or anything, the idle is a little bit high but not to bad. Like if I stop and don't hold the break it runs forward a bit. If I put out kick stand and let it run, sometimes it wants to take off a bit. I'm sure previous owner has it tight somewhere. Some people say if moped idles high that it can ruin the motor in long run or etc. If I was to put a screw on it, all it'll do is make it rev higher. So in this case does it really matter if I have it on or off? The idle screw. Thanks in advance.
@user-cv4tf3us6z7 ай бұрын
👍🎣⛵💯
@nitenerd9 ай бұрын
My favorite videos are the ones where they say “we already did this step”, also when the people making the video assume you know how to remove a carburetor (in this case)- do I clamp the hoses that I disconnect from the carb? Do the hoses have a certain order? Do the carburetor jets have to screw back in to the exact location? Do I clean the whole carb with brake cleaner? This video will never be played in a garage near trained mechanics- know your audience people!!
@elenababilonia97109 ай бұрын
Will this work on a 49cc
@josephgeorgeejr70399 ай бұрын
If your any age not using a helmet your a total fool!!
@jodie46099 ай бұрын
I'm @ 0.31 seconds this is a waste of time without knowing how to remove it
@brandonjoki553310 ай бұрын
Thank you for the help great video
@searchforalex10 ай бұрын
Any update for 2023? Trying to buy a scooter and just moved here, would love not have to walk everywhere
@Truereligiontreyy10 ай бұрын
😊
@AlisonCasilli11 ай бұрын
Great....need to know how to take it out of the bike too.............half as helpful as I needed.
@imremolnar900411 ай бұрын
how and to what value the operating clay level regulator should be set
@imremolnar900411 ай бұрын
How and to what size do you set the float
@jgrinnell7431 Жыл бұрын
Hi great vid I followed , myn starts up same carb as urs , Prety much first time , but I have no air filter and fuel leaking out of exhaust , and I still not sorted the idle , but will adjust the idle like you say , but will the idle sort out the mix ratio to?😊
@izzyzzty6769 Жыл бұрын
I “checked” My ac pump and got squirted in the chest with gasoline😂
@reginaldb.campbelljr.7451 Жыл бұрын
Thank you
@ReddMan_17 Жыл бұрын
Best vid. Thank you.
@tommygoldie655 Жыл бұрын
Is there a button for the choke somewhere?
@hydarmbm3456 Жыл бұрын
Hi. What is the difference between carbs with metal top cover and the ones with black top plastic cover?
@reginaldb.campbelljr.7451 Жыл бұрын
Thank yo for the tips
@Stonersteve26 Жыл бұрын
My Chinese 50cc scooter starts and idles just fine but any revs above idle the engine dies, I hope it's just the carb main jet that needs cleaning.!
@reginaldb.campbelljr.7451 Жыл бұрын
Good video
@YOUNGMONEYREX Жыл бұрын
Had my scooter for almost two years gonna do this weekend but just replace the drive belt now it stalling everytime I stopped but start rite back up and the kickstart is getting stuck downward
@misplacedangler Жыл бұрын
Doesn't it have a fuel line connected to it that would also have to be disconnected to remove it?
@PrestonMiddle Жыл бұрын
Sc?
@yevgeniylitvinov3365 Жыл бұрын
probably doesn't even start
@Theholder9 Жыл бұрын
peace to everyone, Where can I buy a new tool kit?
@Theholder9 Жыл бұрын
Is there a visual indication of how many CC's it is? Where do you look to find out?
@gabebbikes Жыл бұрын
What about mixture screw do you have to adjust that?
@xINVISIGOTHx Жыл бұрын
this is way better than the last "how to clean scooter carburetor" video I watched. he just sprayed some carb cleaner in the bowl, and said if the jets are clogged, buy a new carburetor 😐
@ScrapVulture111 Жыл бұрын
ty
@augusteking9238 Жыл бұрын
what carb is it
@Hitech82 Жыл бұрын
I have a 2010 Peace sport. Always used Royal Purple full synthetic oil. I have the big board kit 105cc, dual coil, taller rear gears, hoka slipper clutch and slide weights.This scooter will run 58mph all day long. My scooter runs all over virginia Beach. I have 9975.8 on the odometer. Never had a scratch.
@raulzayas9292 Жыл бұрын
Thanks 4 the video
@claudiaberaldi2916 Жыл бұрын
Finalmente un video chiaro per il montaggio del carburatore!!! complimenti!sei bravissimo!!
@earthling369 Жыл бұрын
Thank you very much!! Your video helped me get my moped back up and running.
@SuperIamIrish Жыл бұрын
🙃Where does the vacuum line go on the carb?
@congoparrot Жыл бұрын
thank you. dozens of videos and finally one to show me how to do this. do you have a vid on the best way to drain/clean the gas tank on a Buddy 50?
@williamschueren9926 Жыл бұрын
A new tao 50cc ...only 150 miles...it runs 30 mph...and sometimes 38 mph....seems like it takes off very slow...any suggestions...I have cleaned carbs b4...haven't tried nothing yet
Пікірлер
I need to change my carburetor tray. If I remove the carburetor, not moving the adjustment screws will it throw the carburetor out of control.thks four your video
Thks four your excellent video I have a Vespa Lx 50 my carburetor drope a little petrol from the bolw if I remove the carburetor to change the tray is not out of tune
Is the proper term for a 49/50 cc scooter a Piglet instead of a Hog?
On a 50cc motor how do you prime the motor
Fucking dickhead it doesn’t work for me
I missed where the fuel and vacuum lines attach.
You lost me at the throttle cable. Who said the camera person did a great job. 😮
Jezzzz ...... your hand was in the way, for the throttle cable.😢
6 year old video but still helped me fix my piaggio zip 4 stroke, nice instructions and easy to work on though i needed to readjust my air/fuel mixture again which was a little problem, but I got it to work :)
Where did you buy the carburetor from
this is great information. and great tutorial. /Bklyn👑
Great video!!!!!
Hello, I have a 50 cc Jinlun. Similar to this, but it had a sheetrock screw instead of the idle screw. I took it off. It dosent die or anything, the idle is a little bit high but not to bad. Like if I stop and don't hold the break it runs forward a bit. If I put out kick stand and let it run, sometimes it wants to take off a bit. I'm sure previous owner has it tight somewhere. Some people say if moped idles high that it can ruin the motor in long run or etc. If I was to put a screw on it, all it'll do is make it rev higher. So in this case does it really matter if I have it on or off? The idle screw. Thanks in advance.
👍🎣⛵💯
My favorite videos are the ones where they say “we already did this step”, also when the people making the video assume you know how to remove a carburetor (in this case)- do I clamp the hoses that I disconnect from the carb? Do the hoses have a certain order? Do the carburetor jets have to screw back in to the exact location? Do I clean the whole carb with brake cleaner? This video will never be played in a garage near trained mechanics- know your audience people!!
Will this work on a 49cc
If your any age not using a helmet your a total fool!!
I'm @ 0.31 seconds this is a waste of time without knowing how to remove it
Thank you for the help great video
Any update for 2023? Trying to buy a scooter and just moved here, would love not have to walk everywhere
😊
Great....need to know how to take it out of the bike too.............half as helpful as I needed.
how and to what value the operating clay level regulator should be set
How and to what size do you set the float
Hi great vid I followed , myn starts up same carb as urs , Prety much first time , but I have no air filter and fuel leaking out of exhaust , and I still not sorted the idle , but will adjust the idle like you say , but will the idle sort out the mix ratio to?😊
I “checked” My ac pump and got squirted in the chest with gasoline😂
Thank you
Best vid. Thank you.
Is there a button for the choke somewhere?
Hi. What is the difference between carbs with metal top cover and the ones with black top plastic cover?
Thank yo for the tips
My Chinese 50cc scooter starts and idles just fine but any revs above idle the engine dies, I hope it's just the carb main jet that needs cleaning.!
Good video
Had my scooter for almost two years gonna do this weekend but just replace the drive belt now it stalling everytime I stopped but start rite back up and the kickstart is getting stuck downward
Doesn't it have a fuel line connected to it that would also have to be disconnected to remove it?
Sc?
probably doesn't even start
peace to everyone, Where can I buy a new tool kit?
Is there a visual indication of how many CC's it is? Where do you look to find out?
What about mixture screw do you have to adjust that?
this is way better than the last "how to clean scooter carburetor" video I watched. he just sprayed some carb cleaner in the bowl, and said if the jets are clogged, buy a new carburetor 😐
ty
what carb is it
I have a 2010 Peace sport. Always used Royal Purple full synthetic oil. I have the big board kit 105cc, dual coil, taller rear gears, hoka slipper clutch and slide weights.This scooter will run 58mph all day long. My scooter runs all over virginia Beach. I have 9975.8 on the odometer. Never had a scratch.
Thanks 4 the video
Finalmente un video chiaro per il montaggio del carburatore!!! complimenti!sei bravissimo!!
Thank you very much!! Your video helped me get my moped back up and running.
🙃Where does the vacuum line go on the carb?
thank you. dozens of videos and finally one to show me how to do this. do you have a vid on the best way to drain/clean the gas tank on a Buddy 50?
A new tao 50cc ...only 150 miles...it runs 30 mph...and sometimes 38 mph....seems like it takes off very slow...any suggestions...I have cleaned carbs b4...haven't tried nothing yet