If your brake light stays on all you need to do is unplug both positive and negative connections and if the light stays on then you are good with the rear brake and you move up to the front brake sensor. All in all, it was a very informative video thank you for making it.

Thank you! I’ve been looking all day trying to find the issue! I attempted (dumbly) to replace my handgrips yesterday and couldn’t figure out why my brakes weren’t working! They work now! Much appreciated!!!

@GlidingOnTwos

26 күн бұрын

@brentsteckel1948 Glad the video was able to help you. 🤙🏽👍🏽

THANK YOU! I followed exactly what you said and re-searching my problem with my brake lights and sure enough I have my brake handle installed incorrectly. Thanks for the tip. I got you saved in my library.

@GlidingOnTwos

Ай бұрын

I'm glad my video was able to help you. Thanks for watching, and I appreciate the support. 🤙🏽👊🏽

Great step by step how-to video. Thanks

@GlidingOnTwos

Жыл бұрын

Thanks for watching! Hope it helped. 🤙🏾👊🏾

Nice job man, always good to share these type of informative videos… very helpful for the moto community! ✌️

@GlidingOnTwos

2 жыл бұрын

Yes sir! Thanks for watching!

Great tip. Thanks for sharing. Ride safe 👍👊🇺🇸

@GlidingOnTwos

2 жыл бұрын

You bet, thanks for your support!!

Thanks Nore for the tip.

@GlidingOnTwos

2 жыл бұрын

🤘🏾👍🏾

Thank you, I found your video to be very helpful!

@GlidingOnTwos

2 жыл бұрын

Glad the video was helpful for you. Thanks for watching! I hope you'll stick around for more videos and subscribe. 👊🏾🤙🏾

Even with the bad and cover off on the side..RUBY is ROCKIN!!💥💥💪💪💘💘

@GlidingOnTwos

2 жыл бұрын

Haha! Thanks Tommy G.

@PSPTommyG

2 жыл бұрын

@@GlidingOnTwos 👍👍

Another great tech tip to help folks work on their bikes. Great job Nore. Eric

@GlidingOnTwos

2 жыл бұрын

Thanks Eric. I figure this video would help someone down the road and keep costs low.

Good stuff buddy. Sorry I’m late to watch. Really been tied up with work and things around here.

@GlidingOnTwos

2 жыл бұрын

No worries RJ. I've been busy and sick myself to the point where I forgot about the video. 😂

@602North

2 жыл бұрын

@@GlidingOnTwos hope your feeling better brother

Great tips Nore! 💪💪

@GlidingOnTwos

2 жыл бұрын

Glad you liked it!! Thanks for your support!!

Good advice 👍

@GlidingOnTwos

2 жыл бұрын

Thanks for stopping by 🤙🏾

On my old 2013 SG I had the same issue and it was the pressure switch

@GlidingOnTwos

2 жыл бұрын

Yup, normally that's the issue. That's what prompted me to make this video. Hopefully it can save someone big money.

@DeterminedVeteran

2 жыл бұрын

@@GlidingOnTwos exactly hopefully the video does well for you

I noticed on my 2008 Harley Davidson St. glide I had a rear bulb out so I bought a new bulb and the bulb still didn’t work but when I step on the break the brake light came on the turn signals came on on the right side and left side but the bulb would not turn on for the running lights. How do I fix that?

What’s Up Bulldog! I see you finally converted to the dark side and started riding real bikes lol…. Hope your doing well

@GlidingOnTwos

11 ай бұрын

Yessir! Got the first HD back in 2012. Been thru like 5 of them. Got 2 in the garage now.

Ok thanks I’m going to just have to do it my self

@GlidingOnTwos

11 ай бұрын

Sometimes you have to! 🤘🏾👍🏽

Honda trike VTX1300S 2003 year model

@GlidingOnTwos

11 ай бұрын

I'm not sure on that model bike. Sorry!

or just unplug the rear brake switch leads and turn key on. if brake light goes out it would mean that rear switch is stuck closed. Thus faulty

@GlidingOnTwos

4 ай бұрын

👍🏽

Hellyea brother man u just saved.y ass thanks sooo fucking much for posting this video

@GlidingOnTwos

Жыл бұрын

Thanks for watching and hope it helped!

@rusted_dreams710

Жыл бұрын

@@GlidingOnTwos yes it did very much so my brake light was on all the time and I just unplugged the rear brake light switch and it fixed it now brake lights work for front brake

Hey bro i changed the light bulb on my softail but my brake light dont flash sometimes it does with the rear but with lever it doesnt what could be the problem?

@GlidingOnTwos

Жыл бұрын

Check the button switch behind the lever. When you press the front brake lever, it suppose to release the pressure on the switch which turns the brake light on. When you let the lever go, it puts pressure on the switch, shutting the light off. You may have a problem with that.

Honda trike VTX1300S 2003 year model where is the fuses

@GlidingOnTwos

11 ай бұрын

I'm not sure on that model bike! Sorry.

I'm confused my rear brake light won't light up and the front is it a possible relay or a ground fault?

@GlidingOnTwos

Ай бұрын

Could be the relay for the rear wire. That's where I would start.

Things a guy can use thanks

@GlidingOnTwos

2 жыл бұрын

No problem, thanks for watching 👊🏽

I noticed on my 2008 Harley Davidson St. glide I had a rear bulb out so I bought a new bulb and the bulb still didn’t work but when I step on the break the brake light came on the turn signals came on on the right side and left side but the bulb would not turn on for the running lights. How do I fix that?

@GlidingOnTwos

Жыл бұрын

You more than likely have a short in your running light wire. Try tracing that wire from the light to the plug under the seat.

I noticed on my 2008 Harley Davidson St. glide I had a rear bulb out so I bought a new bulb and the bulb still didn’t work but when I step on the break the brake light came on the turn signals came on on the right side and left side but the bulb would not turn on for the running lights. How do I fix that?

@GlidingOnTwos

Жыл бұрын

First check your fuse for the rear lights. If that is not the problem, check your diagnostic code because you might have a break in the wire.